BASANITE, INC. [BASA] Filings

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

———————

FORM 10-K

———————

(Mark One)

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended: December 31, 2023

or

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from: _____________ to _____________

Commission File Number: 000-53574

———————

Basanite, Inc.

(Exact name of registrant as specified in its charter)

———————

2041 NW 15th Avenue, Pompano Beach, Florida 33069

(Address of Principal Executive Office) (Zip Code)

(954) 532-4653

 (Registrant’s telephone number, including area code)

———————

Securities registered pursuant to Section 12(b) of the Act: None.

———————

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. ☐ Yes  ☒ No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. ☐ Yes  ☒ No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ☒ Yes  ☐ No

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232-405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files.)    Yes  ☒  No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). ☐ Yes  ☒ No

State the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant’s most recently completed second fiscal quarter: $3,085,882 on June 30, 2023.

On April 12, 2024, the issuer had 260,156,796 shares of common stock outstanding.

BASANITE, INC.

TABLE OF CONTENTS

i

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

All statements, other than statements of historical fact, included in this Form 10-K, including without limitation the statements under “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Description of Business,” are, or may be deemed to be, “forward-looking statements” within the meaning of the safe harbor provisions of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. Such forward-looking statements involve assumptions, significant known and unknown risks, uncertainties and other factors (many of which may be out of our control), which may cause the actual results, performance or achievements of our company to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements contained in this Form 10-K. In addition, our management may from time to time make written or oral forward-looking statements with respect to our long-term objectives or expectations which may be included in our filings with the Securities and Exchange Commission (the “SEC”), reports to stockholders and information provided in our website. Such statements are similarly subject to the same assumptions, risks, uncertainties and other factors

The words or phrases “will likely,” “are expected to,” “is anticipated,” “is predicted,” “forecast,” “estimate,” “project,” “plans,” “believes,” “may” or similar expressions identify “forward-looking statements.” Such forward-looking statements are subject to certain risks and uncertainties that could cause actual results to differ materially from historical earnings and those presently anticipated or projected. We wish to caution you not to place undue reliance on any such forward-looking statements, which speak only as of the date made. We are calling to your attention important factors that could affect our financial performance and could cause actual results for future periods to differ materially from any opinions or statements expressed with respect to future periods in any current statements.

The following list of important risk factors and uncertainties is not all-inclusive, and we specifically decline to undertake an obligation to publicly revise any forward-looking statements that have been made to reflect events or circumstances after the date of such statements or to reflect the occurrence of anticipated or unanticipated events. Among the factors that could have an impact on our ability to achieve expected operating results and growth plan goals and/or affect the market price of our stock are:

Although we believe that our expectations (including those on which our forward-looking statements are based) are reasonable, we cannot assure you that those expectations will prove to be correct. Should any one or more of these risks or uncertainties materialize, or should any underlying assumptions prove incorrect, actual results may vary materially from those described in our forward-looking statements as anticipated, believed, estimated, expected, or intended.

Except for our ongoing obligations to disclose material information under the federal securities laws, we undertake no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events, or any other reason. All subsequent forward-looking statements attributable to us or any person acting on our behalf are expressly qualified in their entirety by the cautionary statements contained or referred to herein. In light of these risks, uncertainties and assumptions, the forward-looking events discussed in this Annual Report might not occur.

ii

SUMMARY OF RISK FACTORS

Investing in our common stock is highly speculative and involves a significant degree of risk. You should carefully consider the risks and uncertainties discussed under the section titled “Risk Factors” elsewhere in this Annual Report before making a decision to invest in our common stock. Certain of the key risks we face include, without limitation:

iii

iv

v

PART I

Unless we have indicated otherwise, or the context otherwise requires, references in this Annual Report to “BASA,” the “Company,” “we,” “us” and “our” or similar terms refer to Basanite, Inc., a Nevada corporation and its subsidiaries, collectively.

Overview

Through our wholly owned subsidiary, Basanite Industries, LLC, a Delaware limited liability company (“BI”), we manufacture a range of “green” (environmentally friendly), sustainable, non-corrosive, lightweight, composite products used in concrete reinforcement by the construction industry. Our core product is BasaFlex™, a basalt fiber reinforced polymer (“BFRP”) reinforcing bar (known as “rebar”) which we believe is a stronger, lighter, sustainable, non-conductive, and corrosion-proof alternative to traditional steel.

Our two other main product lines are BasaMix™, which are fine denier basalt fibers available in various chopped sizes, and BasaMesh™, a line of Basalt Geogrid Mesh Rolls, intended to replace welded wire mesh (made of steel).

While we believe our products have significant market potential and have begun to gain some acceptance in the market (as evidenced by the beginning of revenue growth which occurred in 2021 and continued in 2022 and 2023 as below under “Management’s Analysis and Discussion of Results of Operations”), we are currently conducting relatively limited operations due to lack of adequate funding. We are working to secure additional funding of approximately 5 million dollars to increase our manufacturing capacity to meet what we believe will be increasing demand for our products, but until such funding is obtained, there will remain substantial doubt regarding our ability to continue as a going concern.

We were formed as a Nevada corporation in 2006 under the name “Nevada Processing Solutions, Inc.” and entered our current BFRP business in 2017.

Our Products

BFRP is a UV-stable, chemical, acid and moisture resistant material is sustainable and environmentally friendly and has been engineered to replace steel as it never rusts, therefore, addressing the industry’s current corrosion issues. BasaFlex™ BFRP rebar is a corrosion proof, chemical, acid and moisture resistant material, as well as being sustainable and environmentally friendly. BasaFlex™, unlike alternative fiber reinforced polymer (“FRP”) products, was designed and engineered to replace steel in certain structures and applications. Since it is rustproof, BasaFlex™ directly addresses the construction industry’s current issues with reduced structure lifecycles due to corrosion.

Each of our products is specifically designed to extend the lifecycle of concrete products by eliminating “concrete spalling.” Spalling results from the steel reinforcing materials embedded within the concrete member rusting (contrary to popular belief, concrete is porous, and water can permeate into concrete). Rusting leads to the steel expanding and eventually causing the surrounding concrete to delaminate, crack, or even break off, resulting in potential structural failure. We believe that each of our products addresses this important need, along with other key requirements in today’s construction market, and that the following attributes of BasaFlex™ provide it with competitive advantages in the marketplace:

BasaMix™ is designed to help absorb the stresses associated with early-aged plastic shrinkage and settlement cracking in concrete, as well as providing an increased toughness for enhanced reinforcement in Slab on Grade (SOG) and precast elements. BasaMix™ also serves in a “system approach” for optimum performance of a concrete element when used in conjunction with our BasaFlex™ rebar.

BasaMesh™ is designed for secondary and temperature shrinkage reinforcement. BasaMesh™ can also work in conjunction with the BasaFlex™ rebar or BasaMix™ for a total reinforcement program.

We believe that macroeconomic factors are pressuring the construction industry to consider the use of alternative reinforcement materials for the following reasons:

We believe we are well positioned to benefit from this renewed focus, particularly in light of the interest of the U.S. government in funding infrastructure improvements (notably the passage of the $1.2 billion Infrastructure Investment and Jobs Act in November 2021) and events such as the tragic collapse of a residential building in Surfside, Florida.

We submitted our first round of BasaFlex™ rebar products to the Structures and Materials Department of the University of Miami, an industry accredited independent testing laboratory, to obtain a Certified Test Report which allows us to participate in approved FRP applications, such as precast, architectural, flatwork and other non-structural engineered applications, or in applications where steel is a poor choice, like bridge decks, piers, seawalls, sewage tunneling and nuclear plants. On May 29, 2020, a Certified Test Report was submitted to us for engineering use.

During the third quarter of 2020, we began initial manufacturing operations and commenced the manufacture of our initial stock of inventory of BasaFlex™. Also, during this timeframe, we filled key manufacturing positions within our production facility and reached our primary goal of scaling to full capacity single shift operations. Management also began recruiting other key positions, focused initially on product development, driving sales growth and expanding our market presence. Our hiring was focused on key areas of excellence, specifically quality assurance; operations and other technical resources; engineering; and sales and marketing. We successfully completed our initial hiring plan and recruited key personnel with over 140 combined years of industry experience (although presently we have fewer personnel). We have begun selling across our complete product line and are currently working on securing larger orders. We have also sought to develop strategic commercial relationships with multiple testing programs underway (including international locations) across a broad range of applications.

During both the third and fourth quarters of 2020, BI continued research, and development work on BasaFlex™, with the goal of increasing its performance results in the category of modulus. While the baseline version easily met the required industry standard for FRP rebar, we have expanded goals for BasaFlex^™ to be able to replace steel rebar in a broader range of applications than the current industry standard allows for. After extensive internal development and testing, a complete test set of bar sizes #3-#8 of an enhanced version of BasaFlex^™ was submitted to the University of Sherbrooke (near Montreal, Canada) for lab testing. Sherbrooke, led by renowned materials scientist Dr. Brahim Benmokrane, is the world recognized leader in testing FRP products for concrete reinforcement. In February of 2021, Basanite obtained very promising results on the upgraded BasaFlex™ from the Sherbrooke lab, including best in class performance results in both tensile and modulus strength. Following on from this success, we have been working with multiple customers and design professionals to select BasaFlex™ as an alternative to steel in a broader range of applications. These efforts have more recently included work with CPPB and USS (each as defined below) and our board members Manuel A. Rodriguez and Frederick H. Tingberg, Jr. (who joined our Board of Directors in December 2021 as described below), all of whom have introduced us to their contacts within the construction industry and have worked to promote our products.

Early in 2021, we contracted with an independent software company to develop BasaPro™, a design software specifically for use with BasaFlex™. This development effort has been completed and the software is operational. BasaPro allows both our engineers and engineers of record (EOR) to easily compare engineering designs with steel and the same designs with the recommended use of BasaFlex™ in typical concrete applications. It allows for both the conversion to BasaFlex™ from steel in existing concrete designs and for original designs using BasaFlex™ and is based upon the application of industry standards ACI 440 (Guide for the Design and Construction of Structural Concrete Reinforced with Fiber-Reinforced Polymer (FRP) Bars) and ACI 318 (Building Code Requirements for Structural Concrete) using structural steel. BasaPro’s software outputs include all the calculations using independent test results and pictorial design work in conjunction with applicable building codes. This means we can now communicate with the design community in their own language.

On December 10, 2021, we entered into a strategic commercial relationship, comprised of two principal five-year agreements: an Exclusive Supplier Agreement (the “Supplier Agreement”) with Concrete Products of the Palm Beaches, Inc. (“CPPB”), and a Distribution Agreement with U.S. Supplies, Inc. (“USS”). Based in Riviera Beach, Florida, CPPB is a custom precast manufacturer of concrete products for the construction industry, made from a combination of cement and aggregate raw materials. Based in West Palm Beach, Florida, USS is a domestic and international distributor of building products and supplies, specialty construction products, and a provider of engineering services. CPPB and USS are related parties via the common control of Manuel A. Rodriguez (who is a member of our Board of Directors). These contracts are described further below.

In connection with the transactions associated with the Supplier Agreement and the Distribution Agreement, we have issued to USS a common stock purchase warrant (the “Strategic Partner Warrant”). The Strategic Partner Warrant affords USS and its assigns the right, for a five (5) year term, to purchase up to forty million (40,000,000) shares of our common stock (the “Warrant Shares”) at an exercise price of $0.33 per Warrant Share. The right to purchase fifty percent (50%) (or 20,000,000) of the Warrant Shares shall vest immediately and the right to purchase the remaining fifty percent (50%) (or 20,000,000) of the Warrant Shares shall only vest upon our actual receipt of new investment into our company of not less than $5,000,000 from one or any combination of the following entities or individuals: (i) USS and its affiliates, (ii) CR Business Consultants, Inc. (any entity controlled by Raphael Salas) and its affiliates or (iii) any person or entity first introduced to us by any of the foregoing. As of the date of the Annual Report, this investment condition has not been achieved.

In connection with the transactions contemplated by the Distributor Agreement and the Supplier Agreement, our Board of Directors appointed Manuel A. Rodriguez and Frederick H. Tingberg, Jr. as members of our Board of Directors. Mr. Rodriguez is an affiliate of and controls each of USS and CPPB, and Mr. Tingberg (who provides consulting services within the construction industry) was recommended for appointment to our Board of Directors by Mr. Rodriguez.

Recent Developments

None.

Industry Background and Current and Proposed Customers

We are focused on the construction industry, more specifically on introducing composite products for the reinforcement of concrete and secondarily for asphalt. According to Grandview Research, the annual concrete reinforcement market in the U.S. is estimated to be approximately $9.4 billion. This market is very established and resistant to change; however, the reinforcement of concrete using traditional steel products and methods have proven to be problematic. Almost every concrete building and foundation in the world was originally built using steel reinforcement. Steel is a long-time proven product for these applications, but it has an inherent problem: it corrodes (rusts) and degrades when exposed to air and water. Every steel reinforcing bar (or rebar) ever used is in some form of degradation due to corrosion. This corrosion leads the concrete to de-bond from the reinforcement, crack, and ultimately fail: the process is called “spalling.” This corrosion problem has been recognized by the governing bodies to the point that they have written into code a definition of the “acceptable” amount of corrosion on steel rebar prior to its use. Regardless, the bar continues to rust and ultimately this leads to costly maintenance, initially with repairs and eventually replacement over the lifetime of the structure. Addressing this problem is our key focus and value proposition – all of our products are essentially corrosion proof. In addition, we believe our disruptive alternative to steel reinforcement also offers greater strengths, giving the end-user alternatives for concrete reinforcing elements that will never require maintenance or replacement for as much as 100 years or more.

Our customer base is a mix between the design-build community and government agencies who can specify our products, and wholesalers (distributors), contractors and concrete producers who will use and sell our products.

Infrastructure Investment and Jobs Act (“IIJA”)

The IIJA, signed into law on November 15, 2021, provides for significant national investments in the repair and rebuilding of roads and bridges in the U.S. with a focus on climate change mitigation, resilience, equity, and safety In the United States, 1 in 5 miles of highways and major roads, and 45,000 bridges, are in poor condition. The IIJA reauthorizes surface transportation programs for five years and invests $110 billion in additional funding to repair roads and bridges and support major projects. We believe that our environmentally friendly basalt fiber products are well positioned to emerge as a technology leader in the expanded market for intelligent construction materials that will benefit from the IIJA. We are working on identifying opportunities to access federal funding streams this unprecedented U.S. federal investment in public safety, homeland security, and transportation infrastructure.

Suppler Agreement with CPPB

In December 2021, we entered into the Supplier Agreement with CPPB, who as a result became a significant customer. Under the terms of the Supplier Agreement, until December 31, 2022, we will sell products to CPPB at an agreed upon discounted price to the price of steel reinforcing bar (such price for steel rebar being first obtained by CPPB via a competitive third-party quote). We have agreed to this special pricing to afford CPPB the opportunity, for a one-year period, to incorporate our BFRP products into CPPB’s concrete products, and to offer these combined (and we believe improved) products to construction projects at prices competitive to prevailing steel reinforcing bar. We believe this collaborative approach with CPPB will result in both an acceleration of the process to gain regulatory and other required approvals by applicable third parties (including government agencies) for inclusion in construction projects, as well as an acceleration of market recognition of our products. Commencing January 1, 2023, we will sell our products to CPPB in accordance with an agreed upon fee schedule based upon our prevailing prices for the products. Such pricing may be amended from time to time with the mutual prior consent of the parties.

Under the terms of the Supplier Agreement, we are responsible for the engineering conversion calculations required to modify CPPB’s product designs from using steel rebar to using BasaFlex^TM BFRP reinforcement. This will be accomplished through the use of our BasaPro^TM proprietary software, with a required review by a Florida licensed professional engineer. CPPB is responsible, among other matters, for taking all necessary steps to obtain product clearance, validation, importation authorization and any product approvals, regulatory licenses, or other approvals, permits or material authorizations as may be required by any governmental agency or authority with respect to the importation, marketing, distribution, sale and use of its concrete products incorporating our products. We believe that the combined efforts of our company and CPPB will also accelerate the qualification of our products for government and other contracts and help gain the acceptance of our products for these contracts.

The Supplier Agreement also contains other customary terms and conditions, including with respect to the making of product orders, packaging and delivery, product warranties, product returns, intellectual property, confidentiality, limitations on liability, indemnification, non-solicitation of employees, insurance and representations and warranties of the parties.

The Supplier Agreement has a term of five (5) years, and thereafter the term shall automatically renew for successive one (1) year terms unless terminated by the parties prior to the end of the initial term or any renewal term. The Supplier Agreement may be terminated (i) by the mutual agreement of the parties, (ii) upon breach of the Supplier Agreement (with a notice period and an opportunity to cure) and (iii) upon the bankruptcy and insolvency of a party.

While we have generated relatively little revenue to date, we continue to receive inquiries from a range of customers for our products, indicating what we believe is a significant level of market interest for BasaFlex™. Some of these inquiries would be for very large potential orders for new, multi-year construction projects. Based on our current manufacturing capacity, these inquiries (if they lead to actual orders) would exceed our capability to deliver within the customer’s requested timeframe, and largely because of this, there is no guarantee that orders will actually be received without expansion.

Manufacturing

We previously leased a fully permitted, 36,900 square foot facility located in Pompano Beach, Florida equipped with five customized, Underwriters Laboratories approved, Pultrusion manufacturing machines for BasaFlex™ production, plus other composite manufacturing equipment. Each Pultrusion machine has up to two linear production lines (we use one or two lines per machine depending on rebar size – giving a maximum capacity of 10 manufacturing lines). To date, BI’s operations team has successfully optimized and scaled the capacity of our manufacturing plant to produce up to 25,000 linear feet of BasaFlex™ rebar per shift, per day, depending on the product mix. BI’s own fully equipped test lab is utilized to evaluate, validate, and verify each product’s performance attributes. Depending on our manufacturing needs in the future, we have and may continue to explore alternative or additional manufacturing or corporate facilities. As of December 31, 2022, we no longer operate nor manufacture in our previous Pompano Beach facility. We are in a continued search for a new manufacturing facility.

To satisfy what we perceive the market interest for BasaFlex™ to be, and in particular to address potential large-scale customers like CPPB, we need to significantly accelerate the expansion of our manufacturing capacity. Our current goal is to locate a new manufacturing facility and restart our manufacturing operations and ultimately to reach a plant production capacity exceeding 73,000 linear feet per day per day on a two shift basis (which would be 3 times our current capacity). To accomplish these goals, we have designed and developed customized pultrusion equipment which offers significantly increased capacity in the same footprint as our current equipment. Our new technology manufacturing system, named BasaMax™, has been specifically designed for the manufacture of BasaFlex™ using our patent pending process. Two versions of this equipment have been designed, and these will not only offer double the capacity of our current equipment (per machine), but also each will run at faster and more efficient rates. A prototype has completed thorough testing in our previous Pompano facility, including initial production runs, and is currently undergoing modifications and upgrades to the final production configuration.

Based on this trial, we are planning a two-phase plant expansion, eventually including a total of 10 of these new machines. Our goal, subject to raising sufficient funding, of about 5 million dollars is to have the first set of five of the new machines installed and be operational by the end of the third quarter of 2024, and to install and have operational five more, along with additional custom manufacturing equipment, by the fourth quarter of 2025 providing sales dictate. This would create the opportunity for Basanite to ultimately reach our production level target for the new facility by the close of 2025.

Competition

The competitive landscape for concrete reinforcement is intense and can generally be divided into two categories: steel reinforcement, the incumbent since its beginnings in the nineteenth century, and alternative fiber reinforced polymer (FRP) reinforcement, which is gaining traction globally but remains a relatively new concept in the U.S. There is reinforcement of some type in most every cubic yard of concrete that is poured, and steel rebar producers are present in every major U.S. city. In contrast, there are only a handful of FRP manufacturers, and these can be segmented into 3 major types of FRPs used in construction rebar: carbon, fiberglass and basalt. We believe BFRP has a wider application temperature range, higher oxidation resistance, higher radiation resistance, higher compression strength and higher shear strength than its previously noted contemporaries. We believe it also represents the best value proposition.

We believe our major competitors in the BFRP space specifically include, Neuvokas, Kodiak, Armastek, Galen, Sudaglass and several manufacturers based in China. Other, non-basalt FRP competitors include Owens Corning/Mateen, Liberty, American Fiberglass Rebar, Tuf-Bar, Pulltrall and Pultron. As noted, BFRP is relatively new in the U.S., and thus we also compete with major international providers of traditional steel rebar. Given the early stage of our company, we believe all of our competitors are larger, more established, and more financially stable than our company.

Sources of Raw Materials

The sourcing of our raw materials is a primary focus for our management. It is incumbent upon us to pre-plan our requirements prior to, and in conjunction with, our actual growth and developing an understanding of manufacturing lead-times and other obstacles that may restrain the flow of our established supply chain. Our current suppliers are aware of our aggressive plans for growth and are committed to helping us achieve those plans by adding capacity and developing/expanding long term agreements, with commitments for growth. Our principal suppliers for basalt continuous fiber roving (which is a key component of BasaFlex) are BWF/Kamenny Vek and SRCS, Inc. as a backup supplier. Our principal suppliers for resin matrix ingredients are Aalchem, Phlex-Tek, Lindau Chemical and Cabot Labs.

Sales and Marketing

We primarily utilize third party distribution partners (such as USS, as described further below) to market and sell our products, with a small amount of direct marketing business that isn’t typically covered by distribution arrangements (such as one-off technology-driven segments on the construction industry such as ultra-high-performance concrete, engineered cementitious composite concrete or geopolymer concrete). We also can generate sales through private label arrangements for larger company as well as export sales. As part of our distribution-focused marketing efforts, we focus on design-build companies, engineering, and architectural firms, as well as military, federal, state and local government agencies in an effort to drive material acceptance and specification approvals. We have secured multiple independent representatives and distributors to date, as detailed in the graphic below, with plans to enter into arrangements to secure additional geographic coverage. We’ve also contracted with other representation to bring our products and message to other parts of the world.

Distribution Agreement with USS

In December 2021, we entered into a Distribution Agreement with USS. Under the terms of the Distribution Agreement, we are responsible to provide engineering conversion calculations when required by USS for targeted construction projects. The conversion calculations support the use of BasaFlex™ BFRP rebar reinforcement, both in new designs or to replace steel reinforcement in existing designs. This engineering work will also be accomplished through the use of the BasaPro™ proprietary software, with a required review by a Florida licensed professional engineer. USS is responsible for, among other matters, obtaining any required import or export licenses necessary for us to ship our products, including certificates of origin, manufacturer's affidavits, and a U.S. Federal Communications Commission's identifier, if applicable and any other licenses required under US or foreign law.

The Distribution Agreement has a term of five (5) years, and thereafter the term shall automatically renew for successive one (1) year terms unless terminated by the parties prior to the end of the initial term or any renewal term. The Distribution Agreement may be terminated (i) by the mutual agreement of the parties, (ii) upon breach of the Distribution Agreement (with a notice period and an opportunity to cure) and (iii) upon the bankruptcy and insolvency of a party.

The Distribution Agreement also contains other customary terms and conditions, including with respect to registration of USS customers, packaging, shipping, Product warranties, Product returns, insurance requirements, intellectual property, confidentiality, limitations on liability, indemnification, non-solicitation of employees, and representations and warranties of the parties.

Intellectual Property

Currently, we have a patent pending application with the USPTO for BasaFlex™, and plan to augment our intellectual property portfolio with other novel products, processes, and equipment. Additionally, we have secured registered trademarks on our company name as well as our key product names, including BasaFlex™; BasaMix™; BasaMesh™ and BasaWrap™, with the near-term intent to secure BasaPro, BasaMax and BasaLinks. These trade names represent our BFRP Rebar, Basalt Chopped Fiber, BFRP Geogrid Mesh, Basalt Reinforcing Wrap Kit, Software Program, Proprietary Pultrusion Equipment and Configured BFRP Shapes respectively.

Government Regulation

fiber reinforced polymer rebar is subject to various testing and certifications from various private and public entities, such as the Federal and State Departments of Transportation, the ISO (the International Organization for Standardization) and the US Army Corps of Engineers, in order to satisfy regulatory requirements for manufacturing and use as concrete reinforcement. The American Concrete Institute (ACI), ASTM (formerly the American Society for Testing and Materials) and the International Code Council (ICC) have very specific testing regimen for FRP materials and strict guidelines regarding the acceptance criteria and certification process. It includes not only the products themselves, but the facility, the manufacturing equipment, and the quality control measures used in the process as part of the overall approval. The testing protocols are very expensive and run approximately $30,000 per bar size for the full required testing protocols. However, once the products have met all the federal, state and local building code requirements, we believe doors will open for a myriad of other applications and opportunities. There is no guarantee, however, that we will be able to secure such approvals and certifications in the future. Furthermore, we are dependent on third party independent groups, such as university laboratories and other certifying bodies, to obtain approvals and certifications. Inability to secure approvals and certifications could materially harm our ability to generate revenue.

Moreover, we are subject to various federal, state, and local laws, rules, and regulations. We are subject to the requirements of the U.S. Department of Labor Occupational Safety and Health Administration (“OSHA”), particular with respect to our manufacturing facility. In order to maintain compliance with applicable OSHA requirements, we have established uniform safety and compliance procedures for our operations, and implemented measures designed to prevent workplace injuries. Our safety programs focus on job hazard identification and prevention, coupled with extensive on-going job-specific training.

We also are subject to environmental laws, rules, and regulations that limit discharges into the environment, establish standards for the handling, generation, emission, release, discharge, treatment, storage, and disposal of hazardous materials, substances, and wastes, and require cleanup of contaminated soil and groundwater. These laws, ordinances, and regulations are complex, change frequently, and have tended to become more stringent over time. Many of them provide for substantial fines and penalties, orders (including orders to cease operations), and criminal sanctions for violations. They may also impose liability for property damage and personal injury stemming from the presence of, or exposure to, hazardous substances. In addition, certain of our operations require us to obtain, maintain compliance with, and periodically renew, environmental permits. Certain of these environmental laws, including the Comprehensive Environmental Response, Compensation, and Liability Act (“CERCLA”), may require the investigation and cleanup of an entity’s or its predecessor’s current or former properties, even if the associated contamination was caused by the operations of a third party. These laws also may require the investigation and cleanup of third-party sites at which an entity or its predecessor sent hazardous wastes for disposal, notwithstanding that the original disposal activity accorded with applicable requirements. Liability under such laws may be imposed jointly and severally, and regardless of fault. In addition, our operations could in the future be subject to regulations related to climate change.

We have incurred and, if our business grows, we will continue to incur costs to comply with the requirements of health and safety, transportation, and environmental laws, ordinances, and regulations. These requirements could become more stringent in the future, and compliance costs may be material and places restrictions on our business that we will be required to manage.

Employees and Consultants

Our employees are essential to our purpose—to create an innovative, sustainable, productive, and extended future; our values—teamwork and innovation; and our strategy and execution. A truly innovative workforce needs to be diverse and leverage the skills and perspectives of various backgrounds and experiences. In attracting a diverse workforce, we stress the teamwork approach as well as the life work balance philosophy. Our workforce needs are highly technical, with the substantial majority of our employees’ needs focused on working in engineering, technical and financial roles. As of December 31, 2023, we had two full time employees, all of which are employed for the continuing operations. None of our employees are represented by a labor union, nor governed by any collective bargaining agreements. We consider relations with our labor force as satisfactory.

As of December 31, 2023, our employees had the following gender demographics:

At December 31, 2021, our employees had the following race and ethnicity demographics:

Facilities

Our principal office is leased and located at 2660 N.W. 15^th Court, Pompano Beach, FL 33069. The lease is for approximately 1,500 square feet of space, which includes our temporary office space and our interim production floor. We do not believe the facility is sufficient to support our current operations, although we have and may continue to explore securing alternative or additional manufacturing or corporate facilities.

An investment in our common stock is highly speculative and involves a significant degree of risk, including the risks described below. You should carefully consider the risks described below before purchasing our common stock. The risks highlighted here are not the only ones that we may face. For example, additional risks presently unknown to us or that we currently consider immaterial or unlikely to occur could also impair our operations. If any of the risks or uncertainties described below or any such additional risks and uncertainties occur, our business, prospects, financial condition, or results of operations could be negatively affected, and you might lose all or part of your investment.

Risks Related to Our Business and Company

We have a history of operating losses and may never achieve significant revenues, positive cash flow, or profitable results of operations.

Since the inception of current business in 2017, we have generated minimum revenues, have not been profitable and have incurred significant losses and cash flow deficits. For the fiscal years ended December 31, 2023, and 20232 we reported net losses of $2,169,379 and $7,971,799 respectively, and negative cash flow from operating activities of $3,811,627 and $3,907,401, respectively. As of December 31, 2023, we had an aggregate accumulated deficit of $56,262,389 and $54,093,010 in 2022, respectively. We anticipate that we will continue to report losses and negative cash flow. There is therefore a risk that we will be unable to operate our business in a manner that generates positive cash flow or profit, and our failure to operate our business profitably would damage our reputation and stock price.

We have extremely limited cash resources with which to operate our business, and we may have difficulty in raising capital and may consume resources faster than expected.

We presently have extremely limited cash resources to meet our current or future capital requirements. We do not expect to generate significant revenues for the foreseeable future, and we may not be able to raise the funds estimated at 5 million dollars we require immediately or the funds we may require in the future, which would leave us without resources to continue our operations. We have faced difficulties recently in raising needed capital and may continue to have difficulty raising needed capital in the near or longer term as a result of, among other factors, the very early stage of our business plan. Further, we may consume any available cash resources more rapidly than currently anticipated, resulting in the need for additional funding sooner than anticipated. Our inability to raise funds could lead to decreases in the price of our common stock and the failure of our businesses.

There is substantial doubt about our ability to continue as a going concern.

We have generated nominal revenues to date in our current BRFP business model and have generated significant losses from operations. Our revenues are not significant enough to be able to generate profits, and this condition is expected to continue for the foreseeable as we seek to raise funding and invest in our manufacturing capabilities as well as our sales and marketing efforts. We have incurred operating losses since the inception of our basalt fiber business and will continue to incur net losses until we can produce sufficient revenues to cover our costs. In addition, a number of factors continue to hinder our ability to attract capital investment, and no assurances can be given that we will be able to raise capital in the future on acceptable terms, or at all. We have concluded that these conditions, in aggregate, raise substantial doubt about our ability to continue as a going concern. Our independent auditors have included in their audit reports for our most recent fiscal years an explanatory paragraph that states that our net loss and working capital deficiency raises substantial doubt about our ability to continue as a going concern. If we are unable to increase our revenues and establish profitable operations over time, our business might fail.

We have a limited operating history and we have incurred net losses in the past and expect to incur additional losses in the future.

We have a limited operating history in our current business model and have not generated meaningful revenues and have not recorded a profit since the inception of our current business model. As a result of this limited and overall negative operating history, and the uncertainty of our business model, investors have limited ability to assess our future prospects, and we cannot reliably forecast the future results of our operations. We expect to increase our operating expenses in the future as a result of refining and upgrading our manufacturing and other internal processes, as well as implementing our sales and marketing strategies. In addition, we expect our operating expenses to increase in the future as we expand our operations. If our operating expenses exceed our expectations, or if we do not generate revenues according to our plans, our financial performance would be adversely affected. If our revenue does not grow to offset these increased expenses, we will likely not be profitable for the foreseeable future. The continuation of losses over time could impair our ability to implement our business plan and finance our company, which could lead to the failure of our business.

We have a short operating history and a new business model in an emerging market. This makes it difficult to evaluate our future prospects and increases the risk of your investment.

Our limited operating history in our current BRFP rebar business model also makes it difficult for investors to evaluate our future prospects. You must consider our business and prospects in light of the significant risks and difficulties we have encountered and will continue to encounter as an early-stage company in a new market. We may not be able to successfully address these risks and difficulties, which could materially harm our business and operating results. In addition, we do not know if our current business model will operate effectively now or in the future. There is a risk, therefore, that current economic conditions or worsening economic conditions, or a prolonged or recurring recession, or any other factors (some of which we may not yet have experienced or anticipated) that have an adverse impact on the construction industry and the potential demand for our rebar product, would have a significant adverse impact on our operating and financial results.

We currently have very limited cash resources and need substantial additional capital to fund our operations, which, even if obtained, could result in substantial dilution or significant debt service obligations. We may not be able to obtain additional capital on commercially reasonable terms, which could adversely affect our liquidity and financial position.

We currently have very little limited cash resources as all our fundraising in the last year have been expended on operating our business. We will thus require substantial additional capital estimated at 5 million dollars to fund the anticipated growth and expansion of our business and to pursue targeted revenue opportunities. Due to many factors, including the early stage of our business and the lack of liquidity in our publicly traded stock, as well as other uncertainties, we have had difficulties in raising necessary capital and there is a material risk that we will be unable to raise additional capital on acceptable terms, or at all. Even if we are presented with opportunities to raise additional capital, we do not know ahead of time the terms of any such capital raising. In addition, any future sale of our equity securities would dilute the ownership and control of your shares and could be at prices substantially below prices at which our shares currently trade. We may seek to increase our cash reserves through the sale of additional equity or debt securities, including securities convertible into or exercisable for shares of our common stock. The sale of convertible debt securities or additional equity securities could result in additional and potentially substantial dilution to our shareholders. The incurrence of convertible or non-convertible indebtedness would result in increased debt service obligations and could result in operating and financial covenants that would restrict our operations and liquidity. Any failure to raise additional funds on favorable terms could have a material adverse effect on our liquidity and financial condition and require us to significantly curtail or terminate our operations.

We have identified material weaknesses in our internal control over financial reporting.

Give the early-stage nature of our company, we have limited accounting and financial reporting personnel (including the current lack of a full-time Chief Financial Officer) and other resources with which to address our internal controls and related procedures. We and our independent registered public accounting firm have identified material weaknesses in our internal controls over financial reporting related to (i) the U.S. GAAP expertise and experience of our internal accounting personnel and (ii) a lack of segregation of duties within accounting functions. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis. If we are unable to remedy our material weaknesses, or if we generally fail to establish and maintain effective internal controls appropriate for a public company, we may be unable to produce timely and accurate financial statements, and we may conclude that our internal control over financial reporting is not effective, which could adversely impact our investors’ confidence and our stock price.

We may be unable to repay our outstanding secured indebtedness, which is past due, which could further strain our allocation of limited cash resources or force us to declare bankruptcy.

We currently owe approximately $2,144,357,695 plus $554,595 of accrued interest under a 20% Secured Convertible Promissory Note held by The Richard A. LoRicco Sr. and Lucille M. LoRicco Irrevocable Insurance Trust DTD 4/28/95, which is a related party associated with our director Ronald J. LoRicco, Sr. This note matured on February 12, 2024, and as of the date of this Annual Report, no event of default has been called by the note holder.

Given our limited cash resources at this time, we have been unable to repay this indebtedness, and interest on this indebtedness continues to accrue. If all or any of these note holders elect to call an event of default under these notes, we may have increased difficulty raising additional funds and we could be forced into bankruptcy.

Inflationary pressures have and may continue to hamper our business.

Inflationary pressures, shortages in the labor market, and increased competition within and outside our industry for talented employees have increased our labor costs, which could negatively impact our profitability. Particularly considering our highly specialized manufacturing processes, labor shortages or lack of skilled labor have led and could in the future lead to increases in costs to meet demand as we roll out incremental programs to attract and retain talent. Labor shortages may also negatively impact us from servicing any demand that exists for our products or operating our manufacturing facility efficiently. Further, inflationary pressures could increase our labor costs and other key costs, such as the cost of raw materials, which would make it harder to operate our business, particularly given our lack of capital resources. Additionally, we distribute our products and receive vital components for our business through the freight transportation market, and reduced trucking capacity due to shortages of drivers has led to increased costs and reduced service levels due to lack of freight transportation availability.

We expect to derive a substantial portion of our future revenue from sales of BasaFlex and other BFRP products, which leaves us reliant on the commercial viability of such products.

Currently, our primary product is BasaFlex™. We are also developing and marketing secondary sources of basalt fiber-based product revenue, band we expect that sales of BasaFlex™ and other basalt fiber and BFRP products will account for a significant amount of our anticipated revenue potential for the foreseeable future. We currently market and sell BasaFlex™ and these other products on a limited basis in the United States given our limited resources and manufacturing capacity. Because BFRP products are different from traditional steel rebar and similar traditional products, we cannot assure you that BasaFlex™ and/or our other basalt fiber products will be widely accepted in the market, and demand may not increase as quickly as we expect. Also, we cannot assure you that BasaFlex™ and our other products will compete effectively as an alternative to other more well-known and well-established alternatives such as products made from steel. Since BasaFlex currently represents our primary product, and our other products are BFRP-based, we are significantly reliant on the level of recurring sales of BasaFlex™ and decreased or lower than expected sales of BasaFlex™ for any reason would cause us to lose substantially all of our revenue.

We may be unable to derive the benefits that we currently anticipate from the Supplier Agreement with CPPB and the Distributor Agreement with USS, and Manuel A. Rodriguez, an affiliate of CPPB and USS, may become subject to conflicts of interest as a result of these agreements.

On December 10, 2021, we entered into a strategic commercial relationship, comprised of two principal five year agreements: the Supplier Agreement CPPB and the Distribution Agreement with USS. CPPB and USS are related parties via the common control of Manuel A. Rodriguez (who has been appointed to our Board of Directors). As a result of these agreements, our business will be dependent on the efforts of CPPB and USS in both purchasing and distributing our products as well as having our products gain qualification for use in construction materials. We may be unable to derive the benefits we currently anticipate from these agreements for several reasons, including, without limitation: (i) failure of CPPB to purchase sufficient quantities of our products, (ii) failure of USS to find new customers for our products, (iii) the inability of CPPB, USS and our company to have our products qualified for use in construction materials and construction projects and (iv) we may generated extraordinary losses in our results of operations due to the pricing arrangements we have agreed to with CPPB and USS. In the event we do not derive the benefits we anticipate from these agreements or generate losses as a result of them, our results of operations will suffer, and our business might fail.

Moreover, Manuel A. Rodriguez, an affiliate of CPPB and USS who became a member of our Board of Directors in December 2021, may become subject to conflicts of interest as a result of these agreements or in connection with efforts to raise funding for our company if his interests as the principal of CPPB and/or USS diverge from his duties as a director of our company. Such conflicts of interest may not be resolved in favor of our shareholders in general, and the existence of such conflicts of interest could cause our business and results of operations to suffer.

Our operating results may fluctuate in unanticipated ways and for reasons beyond our control.

Our operating results may fluctuate from period to period as a result of a number of factors, many of which are outside of our control. The following and similar factors may affect our operating results:

These and similar factors could cause our results of operations to fluctuate in unanticipated ways and deviate from our forecasts.

We may be unable to develop the manufacturing capability and infrastructure necessary to achieve potential sales growth.

Achieving revenue and subsequent growth will require that we develop additional infrastructure in our manufacturing capability as well as in sales, technical and client support functions. Our lack of capital resources has delayed our plans to augment our manufacturing capacity, and there is a risk that we will not have the capital to develop and maintain the capacity or other capabilities necessary for us to implement our business plan. We will continue to design plans to establish growth, adding manufacturing, technical, sales and sales support resources as capital permits. If we are unable to scale our manufacturing capability or use any of our current marketing initiatives or the cost of such initiatives were to significantly increase, or such initiatives are not successful, we may not be able to attract new customers or retain customers and clients on a cost-effective basis, and as a result, our revenue and results of operations would be affected adversely.

Additionally, our plans for manufacturing expansion through augmentation of new equipment and technology are of concern because they are proprietary in nature, and only available from a limited number of suppliers. Any interruption in sourcing through this supply chain will have an adverse impact to our ability to meet a growing market demand.

Our relationships with our channel partners may be terminated or may not continue to be beneficial in generating new clients, which could adversely affect our ability to increase our client base.

We are developing a network of active channel partners which refer clients to us within different business verticals and geographies. This includes our relationship with USS. If we are unable to obtain and maintain contractual relationships with key channel partners, or establish new contractual relationships with potential channel partners, we may experience loss of sales and increased costs and resource constraints in adding customers, which could have a material adverse effect on us. The number of clients we are able to add through these marketing relationships is dependent on the marketing efforts of our partners over which we exercise limited control.

Our sales and marketing efforts may not be successful.

We currently market and sell BasaFlex on a very limited basis, mainly through distribution partners but also directly. We plan to significantly increase the scope of our sales and marketing activities, as we grow to include approvals and new material specifications with all major federal, state, and local agencies and design-build firms. In particular, we are seeking to develop concrete industry partnerships, targeting large concrete manufacturers and contractors. For specific marketing purposes, we have begun to develop industry-specific educational materials, such as white papers and other collaterals to further educate our markets on the use and value of our products versus traditional steel rebar. We are participating in industry committees and associations such as ASTM International (formerly the American Society for Testing and Materials) and the Advisory Council of Managing Agents (known as ACMA). The commercial success of BasaFlex™ and our other basalt fiber products ultimately depends upon several factors, including ultimate material acceptance and necessary specifications required to drive demand generation. BasaFlex™ and our other products may not gain significant increased market acceptance in the construction industry. While positive customer experiences can be a significant driver of future sales, it is impossible to influence the way this information is transmitted and received amongst participants in the construction industry.

In addition, we may not be able to establish or maintain a suitable sales force or enter into or maintain satisfactory marketing and distribution arrangements with others. Our marketing and sales efforts may not be successful in increasing awareness and sales of BasaFlex or our other products. Furthermore, other marketing efforts like advertising, trade shows and educational seminars may not increase revenue to the extent we currently anticipate.

We may not be able to respond in a timely and cost-effective manner to changes in consumer preferences.

Our products, notably BasaFlex™, is and will be subject to changing consumer preferences. A shift in customer demand or expectations away from the products we offer would result in significantly reduced revenue. Our future success depends in part on our ability to anticipate and develop innovative products to respond to those changes. Failure to anticipate and respond to changing consumer preferences in the products we market could lead to, among other things, lower sales of products, significant markdowns or write-offs of inventory, increased product returns and lower margins. If we are not successful in anticipating, adapting, and responding to changes in consumer demand, our results of operations in future periods will be materially adversely impacted.

Competition for employees in our industry is intense, and we may not be able to attract and retain the highly skilled employees whom we need to support our business.

Our success depends on our ability to attract, train and retain qualified personnel. Competition for qualified technical and business personnel in the construction products industry is intense and we may not be able to hire sufficient personnel to support the anticipated growth of our business. If we fail to attract and retain qualified personnel, our business will suffer. We may not be able to hire and retain such personnel at compensation levels consistent with our market. Many of the companies with which we compete for experienced employees have greater resources and are able to offer more attractive terms of employment. In particular, candidates making employment decisions with respect to publicly traded companies often consider the value of any equity they may receive in connection with their employment. As a result, any lack of liquidity or significant volatility in the price of our publicly traded common stock may adversely affect our ability to attract or retain highly skilled personnel. In addition, we invest significant time and expense in training employees, which increases their value to competitors who may seek to recruit them. If we fail to retain our employees, we could incur significant expenses in hiring and training their replacements and the quality of our services and our ability to serve our clients could diminish, resulting in a material adverse effect on our business.

We may be unable to protect our intellectual property rights, and any inability to protect them could reduce the value of our products and brand.

We are pursuing intellectual property rights for all our proprietary and confidential products and process information and will control access to the same. We have applied for a patent on our BasaFlex™ product line, which includes both the product design itself and the specific process for its manufacture. In addition, we expect to file for a patent for our new proprietary BasaMax™ pultrusion equipment. This system would add a layer of intellectual property protection through its electronics, and we believe this is protectable intellectual property. We’ve also secured trademark registrations for our key product names to further protect our brands. However, patents and trademarks may not be granted from our applications, and even if granted, they may not afford adequate protection domestically, or in foreign countries where the laws may not protect our proprietary rights as fully as in the United States, and there can be no assurance that others will not independently develop similar know-how and trade secrets. We will be able to protect our proprietary rights from unauthorized use by third parties only to the extent that our proprietary technologies, protocols, and any future products are covered by valid and enforceable patents or are effectively maintained as trade secrets. There is a risk that future patents will be challenged, invalidated, or circumvented, that the scope of any of our patents will not exclude competitors or that the patent rights granted to us will not provide us with any competitive advantage. If we do not secure registered intellectual property protection for our products and processes, or if we are otherwise unable to protect our proprietary technology, protocols, systems, trade secrets and know-how, the value of our products and brand may be reduced and our ability to complete effectively and our results of operations could suffer.

We may be unable to create new proprietary technology and related intellectual property, which could harm our business.

Our business depends, in part, on our ability to innovate and create new or improved products and processes, including relating to manufacturing, as well as related trade secrets and know-how. There is a risk that we may be unable to innovate due to lack of financial or personnel resources, and even if we do innovate, we may be unable to file new patent or trademark applications, or that if filed, any future patent or trademark applications will result in granted patents and trademarks. Our inability to innovate could harm our ability to compete effectively.

Our patents and other intellectual property are subject to challenges by third parties, and if our intellectual property is successfully challenged or invalidated, our business could be harmed.

Any patents we have obtained or will obtain may be challenged by re-examination, or otherwise invalidated or eventually found unenforceable. Both the patent application process and the process of managing patent disputes can be time consuming and expensive. If we were to initiate legal proceedings against a third party to enforce a patent related to one of our products, the defendant in such litigation could counterclaim that our patent is invalid and/or unenforceable. In patent litigation in the U.S., defendant counterclaims alleging invalidity and/or unenforceability are commonplace, as are validity challenges by the defendant against the subject patent or other patents before the United States Patent and Trademark Office (“USPTO”). Grounds for a validity challenge could be an alleged failure to meet any of several statutory requirements, including lack of novelty, obviousness or non-enablement, failure to meet the written description requirement, indefiniteness, and/or failure to claim patent eligible subject matter. Grounds for an unenforceability assertion could be an allegation that someone connected with prosecution of the patent intentionally withheld material information from the USPTO, or made a misleading statement, during prosecution. Additional grounds for an unenforceability assertion include an allegation of misuse or anticompetitive use of patent rights, and an allegation of incorrect inventorship with deceptive intent. Third parties may also raise similar claims before the USPTO even outside the context of litigation. The outcome is unpredictable following legal assertions of invalidity and unenforceability. With respect to the validity question, for example, and even though we’ve had a third party conduct a search of the subject matter and provide a right to proceed, we cannot be certain that no invalidating prior art existed of which we and the patent examiner were unaware during prosecution. These assertions may also be based on information known to us or the USPTO. If a defendant or third party were to prevail on a legal assertion of invalidity and/or unenforceability, we would lose at least part, and perhaps all, of the claims of the challenged patent. Such a loss of patent protection would or could have a material adverse impact on our business. The standards that the USPTO (and foreign equivalents) use to grant patents are not always applied predictably or uniformly and can change. There is also no uniform, worldwide policy regarding the subject matter and scope of claims granted or allowable in device patents. Accordingly, we do not know the degree of future protection for our proprietary rights or the breadth of claims that will be allowed in any patents issued to us or to others.

However, there can be no assurance that our technology will not be found in the future to infringe upon the rights of others or be infringed upon by others. Moreover, patent applications are in some cases maintained in secrecy until patents are issued. The publication of discoveries in scientific or patent literature frequently occurs substantially later than the date on which the underlying discoveries were made, and patent applications were filed. Because patents can take many years to issue, there may currently be pending applications of which we are unaware that may later result in issued patents that our products or product candidates infringe. For example, pending applications may exist that provide support or can be amended to provide support for a claim that results in an issued patent that our product infringes. In such a case, others may assert infringement claims against us, and should we be found to infringe upon their patents, or otherwise impermissibly utilize their intellectual property, we might be forced to pay damages, potentially including treble damages, if we are found to have willfully infringed on such parties’ patent rights. In addition to any damages, we might have to pay, we may be required to obtain licenses from the holders of this intellectual property. We may fail to obtain any of these licenses or intellectual property rights on commercially reasonable terms. Even if we are able to obtain a license, it may be non-exclusive, thereby giving our competitors access to the same technologies licensed to us. In that event, we may be required to expend significant time and resources to develop or license replacement technology. If we are unable to do so, we may be unable to develop or commercialize the affected products, which could materially harm our business and the third parties owning such intellectual property rights could seek either an injunction prohibiting our sales, or, with respect to our sales, an obligation on our part to pay royalties and/or other forms of compensation. Conversely, we may not always be able to successfully pursue our claims against others that infringe upon our technology. Thus, the proprietary nature of our technology or technology licensed by us may not provide adequate protection against competitors.

In addition to patents, we rely on trademarks to protect the recognition of our company and products in the marketplace. We also rely on trade secrets, know-how, and proprietary knowledge that we seek to protect, in part, through confidentiality agreements with employees, consultants and others. We cannot assure you that our proprietary information will not be shared, our confidentiality agreements will not be breached, that we will have adequate remedies for any breach, or that our trade secrets will not otherwise become known to or independently developed by competitors.

Confidentiality agreements with employees and others may not adequately prevent disclosure of trade secrets and other proprietary information and disclosure of our trade secrets or proprietary information could compromise any competitive advantage that we have, which could have a materially adverse effect on our business.

Our success depends, in part, on our ability to protect our proprietary rights to the technologies used in our products and our proprietary scientific protocols. We depend heavily upon confidentiality agreements with our current and former officers, employees, consultants, and subcontractors to maintain the proprietary nature of our technology and our manufacturing processes. These measures may not afford us complete or even sufficient protection and may not afford an adequate remedy in the event of an unauthorized disclosure of confidential information. If we fail to protect and/or maintain our intellectual property, third parties may be able to compete more effectively against us, we may lose our technological or competitive advantage, and/or we may incur substantial litigation costs in our attempts to recover or restrict use of our intellectual property. In addition, others may independently develop technology similar to ours, otherwise avoiding the confidentiality agreements, or produce patents that would materially and adversely affect our business, prospects, financial condition, and results of operations.

Damage to our reputation or our brand could negatively impact our business, financial condition, and results of operations.

We must increase the value of our brand in order to generate and grow our revenues. We intend to develop a reputation based on the high quality of our rebar and related products as well as on our culture and the experience of our customers. If we do not make investments in areas such as education, marketing, and brand awareness, as well as personnel training, the value of our brand may not increase or may be diminished. Any incident, real or perceived, regardless of merit or outcome, that adversely affects our brand, such as, but not limited to, product failure, accidents, and failure to comply with federal, state, or local regulations, could significantly reduce the value of our brand, expose us to negative publicity and damage our overall business and reputation and negatively impact our financial condition and results of operations.

We depend on certain key personnel and need to attract and retain additional personnel.

We substantially rely on the efforts of our current senior management, including Jackie Placeres, our Interim Acting Chief Financial Officer. Our business would be impeded or harmed if we were to lose her services. In addition, we currently need to fill key officer and other positions, such a permanent Chief Financial Officer and Chief Executive Officer. If we are unable to attract, train and retain highly skilled finance, accounting, technical, managerial, manufacturing, product development, sales, and marketing personnel, we may be at a competitive disadvantage and unable to increase revenue. The failure to attract, train, retain and effectively manage employees could negatively impact our research and development, sales and marketing and reimbursement efforts. In particular, the loss of sales personnel could lead to lost sales opportunities as it can take several months to hire and train replacement sales personnel. Uncertainty created by the turnover of key employees could adversely affect our business.

Our independent directors and executive officers have limited experience in the management of public companies which poses a risk for us from a corporate governance perspective.

Our directors and executive officers are inexperienced with respect to corporate governance of public companies. Our directors are often required to make decisions regarding related parties, such as the approval of related party transactions, compensation levels, and oversight of our accounting function. Our directors and executive officer also exercise substantial control over all matters requiring stockholder approval, including the nomination of directors and the approval of significant corporate transactions. We do not have a majority of independent directors and we have not yet been able to implement certain corporate governance measures, the absence of which may cause stockholders to have more limited protections against transactions implemented by our Board of Directors, conflicts of interest and similar matters. Stockholders should bear in mind our current lack of corporate governance measures in formulating their investment decisions.

The novel coronavirus pandemic has and could continue to adversely impact our business by delaying our ability to receive raw materials and manufacture our product or otherwise effectively conduct and manage our business.

The pandemic caused by the novel coronavirus (known as “COVID-19”) and governmental and other efforts to curb the spread of the pandemic has caused great disruption to the U.S. national and international economies. We have been adversely impacted by COVID-19 in that we have been required to temporarily suspend operations during 2020 due to necessary quarantines, and the impact of COVID-19 on the construction industry we service has been significant. Government mandated shutdowns and other measures held less of an impact on our business during 2021, although we did have personnel absent for periods during the year due to COVID-19. Moreover, the continued prevalence of COVID-19 or outbreaks of new variants thereof could disrupt our supply chain, as well as our own operations due to absenteeism by infected or ill members of management or other employees, or absenteeism by members of management and other employees who elect not to come to work due to illness affecting others in our office or plant, or due to additional necessary quarantines. COVID-19 could also impact members of our Board of Directors as well as key providers of services to us, which could adversely impact the management of our affairs. Additionally, as the COVID-19 pandemic continues to develop, we may be required to continue to spend time and resources in monitoring and adhering to government regulations that impact both our company and our customers and potential customers as necessary, which could also adversely impact our business and results of operations. We continue to monitor our operations and applicable government recommendations and requirements.

Risks Related to Our Industry

We compete with larger, more established companies, and our size and stage of development creates a significant risk for us in our ability to compete.

We are a small, early-stage company competing in a mature industry populated by much larger, more established, and better capitalized companies. Our BFRP products for concrete reinforcement compete as an alternative to traditional steel reinforcement, as well as a direct replacement for other FRP rebar and industry established fiber products. The steel rebar industry is price commoditized, very mature and entrenched within our potential customers. Due in part to our early stage and size, we may be unable to convince customers and design professionals that our BFRP products and higher value proposition are a better choice than long-established, lower cost steel, or other accepted FRP products. Our inability to compete with traditional steel rebar, and the larger, more established, and better capitalized companies that produce traditional steel or non-basalt FRP rebar, would cause our business and results of operations to suffer.

Our inability to comply with numerous regulatory requirements that govern our industry could harm our business.

Our products typically require certain approvals and certifications to satisfy regulatory and building code requirements for use as concrete reinforcement. The American Concrete Institute (ACI), ASTM International (formerly the American Society for Testing and Materials), and the International Code Council (ICC) each have very specific testing regimen for FRP materials and strict guidelines regarding the acceptance criteria and product certification process. These include not only the products themselves, but the facility, the equipment and quality control measures used in the process as part of the overall approval. There is a risk that we will be unable to secure and maintain such approvals and certifications in the future. Furthermore, we are dependent on third party independent facilities, such as university laboratories and/or other certifying bodies, to obtain such approvals and certifications, and these come at a significant cost. Our inability to secure approvals and certifications and/or an extended period of time required to obtain such approvals could materially harm our ability to generate revenue.

Our products, which are all made using igneous basalt rock that must be mined from the ground, may become subject to future government laws, rules, and regulations and/or taxation for environmental reasons associated with mining. Such regulatory actions are beyond our control and could result in increases in the cost of basalt stock and/or restrict or prevent raw material availability, and either action would materially harm our ability to meet demand and generate revenue.

We are dependent on the availability of basalt fiber and other raw materials.

We will depend on the timely availability of various raw materials, including basalt fiber, for the manufacture of our products from various suppliers. Our suppliers are located in the United States and abroad. We are subject to the risk that our suppliers will be unable to provide us with a sufficient or satisfactory supply of raw materials for us to maintain production levels necessary to satisfy customers. The processes used to produce extremely fine denier, high tenacity basalt fiber is extremely meticulous and slow, and can be adversely affected by myriad issues which can affect the delicate melting process, the platinum bushings, or other advanced process elements. Additionally, such issues could adversely impact our suppliers’ ability to provide quality raw materials on a timely basis, which in turn could adversely affect our ability to obtain raw materials and conduct business.

Volatility in prices for raw materials may materially, adversely impact on our prices.

Depending on our customer demand and availability of raw materials, we may be faced with having to source and purchase raw materials from alternative suppliers, and/or at prices that are above the current market price, or in greater volumes than available. Additionally, other factors such as the added capacity of competing steel and/or alternative FRP’s could create negative pricing pressure, which would negatively affect our profit margins.

There are risks associated with the limited number of basalt fiber manufacturers worldwide, who possess a finite capacity to produce fine micron basalt roving that is incorporated into BasaFlex. In the event these manufacturers lack the desire or ability to invest in additional capacity on a timely basis, we may be faced with an inadequate supply of raw material to meet our growth plan. In such an event, it may become necessary to develop a controlled source of basalt fiber, including acquiring or developing a smelting plant to meet our own demand, which will be a costly process and take time and may not be consummated on desirable terms, or at all.

In addition, socioeconomic and political events beyond our control could lead to a shortage of basalt or volatility in the prices for basalt. The recent war in Ukraine has led the world to issue sanctions on the government of Russia. This has shut down our ability to procure basalt fiber material from our secondary supplier, UWF/Kamenny Vek. While we are managing through this particular challenge, similar or worse shortages of, or volatility in the price of, basalt could adversely affect our business and the results of operations.

Government contracts generally are subject to a variety of governmental regulations, requirements and statutes, the violation or alleged violation of which could have a material adverse effect on our business.

Our business plan will be driven in material part by our ability to enter into contracts funded by federal, state, and local governmental agencies. Our contracts with these governmental agencies would generally be subject to specific procurement regulations, contract provisions and a variety of socioeconomic requirements relating to their formation, administration, performance, and accounting and often include express or implied certifications of compliance. Further, government contracts typically provide for termination at the convenience of the customer with requirements to pay us for work performed through the date of termination. We may be subject to claims for civil or criminal fraud for actual or alleged violations of these various governmental regulations, requirements, or statutes. Further, if we fail to comply with any of these various governmental regulations, requirements, or statutes or if we have a substantial number of accumulated Occupational Safety and Health Administration or similar workplace safety violations, any government contracts to which we are a party could be terminated, and we could be suspended from government contracting or subcontracting, including federally funded projects at the state level. Even if we have not violated these various governmental regulations, requirements or statutes, allegations of violations could harm our reputation and require us to incur material costs to defend any such allegations or lawsuits. Should one or more of these events occur, it could have a material adverse effect on our business, financial condition, and results of operations.

If we do not comply with certain federal or state laws, we could be suspended or debarred from government contracting, which could have a material adverse effect on our business.

Various statutes to which our operations are or may in the future be subject, including laws prescribing a minimum wage and regulating overtime and working conditions, provide for mandatory suspension and/or debarment of contractors in certain circumstances involving statutory violations. In addition, the federal and various state statutes provide for discretionary suspension and/or debarment in certain circumstances, including as a result of being convicted of, or being found civilly liable for, fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a public contract or subcontract. The scope and duration of any suspension or debarment may vary depending upon the facts of a particular case and the statutory or regulatory grounds for debarment. Any suspension or debarment from government contracting could have a material adverse effect on our business, financial condition, and results of operations.

Our industry is seasonal and subject to adverse weather conditions, which can adversely impact our business.

Construction operations occur outdoors. As a result, seasonal changes and adverse weather conditions can adversely affect our business operations through a decline in both the need for and use of our products. Adverse weather conditions such as extended rainy and cold weather in the spring and fall could reduce demand for our products and reduce sales. Major weather events such as hurricanes, tornadoes, tropical storms, and heavy snow could also adversely affect our ability and the ability of our customers to conduct business. In addition, construction materials production and shipment levels follow activity in the construction industry, which typically occurs in the spring, summer, and fall. Thus, our business is likely to be seasonal and subject to fluctuation accordingly.

Changes in the global, national, and local economic environment impacting the construction industry may lead to declines in the construction industry and the demand for our products from our customers.

We plan to sell our products primarily to the construction industry. The construction industry is cyclical and can exhibit a great deal of sensitivity to general economic conditions. Low demand from the construction industry could adversely impact our financial position, results of operations and/or our cash flows. Economic or other conditions that adversely impact the global, national, or local construction industry may be novel and singular, in nature, such as the COVID 19 virus, or more seasonal and recurring, such global building supply chain shortages, interest rate fluctuations which impact new construction, lack of government funding for construction initiatives. These conditions, most of which will be beyond our control, could adversely impact business and the results of operations.

Changes to accepted trade practices, trade agreements, or imposition of tariffs may adversely impact the supply and pricing of certain raw materials.

Political events, such as the imposition of tariffs or the dissolution of trade agreements, may negatively impact the supply chain and other factors related to our business. Such events could materially impact supply and pricing of critically necessary raw materials for manufacture of our products. For example, the basalt fiber roving, the primary raw material used in the manufacture of BasaFlex, and our other products are sourced from many parts of the world, and any such events could materially impact our supply and/or pricing. These events could also adversely impact on the construction industry and demand for our products in general. Impacts from such events could adversely impact business and results of operations.

General Business Risks Associated with Our Company

There may be legacy issues (including potential liabilities) arising from or associated with prior management and prior business operations, including potential litigation.

Our company has been in operation since 2006 and as a public company since 2009. During this time, our company has entered and exited several businesses and has undergone three name changes. Current management has only been engaged since with our company since 2021, and in that time has had to address several legacy issues which arose under our previous management, including the 2021 settlement of the lawsuit with Raw Energy, and the resolution of the judgment awarded to the California State Teachers Retirement System and Eagle Supply Products, among others. As such, we face the risk that all prior issues and resulting potential liabilities have not been identified, resolved, or accounted for, and if we are required to addresses any new issues as they arise, our management may become distracted from fulfilling our business objectives and we may be faced with unforeseen costs, expenses and liabilities which could damage our reputation and adversely impact our results of operations.

If we fail to manage our anticipated growth, our business and operating results could be harmed.

If we do not effectively manage our anticipated growth, the quality of our products and services could suffer, which could negatively affect our brand and operating results. To effectively manage our potential growth, we will need to improve our operational, financial and management controls and our reporting systems and procedures. These systems enhancements and improvements may require significant capital expenditures and allocation of valuable management resources, especially as we add additional manufacturing capacity to our primary facility in Pompano Beach, Florida or invest in satellite manufacturing facilities. We also need to manage our sub-tier suppliers of the equipment necessary to support our growth. If planned or additional required improvements are not implemented on a timely or cost-effective basis, or they are not implemented at all for any reason, our ability to manage our growth will be impaired and we may have to make significant additional expenditures to address these issues, which could harm our financial position.

We are subject to risks relating to our information technology systems, and any failure to adequately protect our critical information technology systems could materially affect our operations.

We rely on information technology systems across our operations, including for management, supply chain and financial information and various other processes and transactions. As our manufacturing equipment is wirelessly controlled and operated, and the tracing data (which is required for necessary certifications) our equipment produces is stored electronically, our business depends on the security, reliability, and capacity of these systems. Information technology system failures, network disruptions or breaches of security could disrupt our operations, causing delays or cancellation of customer orders or impeding the manufacture or shipment of products, processing of transactions or reporting of financial results. An attack or other problem with our systems could also result in the disclosure of proprietary information about our business or confidential information concerning our customers or employees, which could result in significant damage to our business and our reputation. Advanced cybersecurity threats, such as computer viruses, attempts to access information, and other security breaches, are persistent and continue to evolve, making them increasingly difficult to identify and prevent. Protecting against these threats may require significant resources, and we may not be able to implement measures that will protect against all the significant risks to our information technology systems. In addition, we rely on third party service providers to execute certain business processes and maintain certain information technology systems and infrastructure, and any breach of security on their part could impair our ability to effectively operate. Any breach of our security measures could result in unauthorized access to and misappropriation of our information, corruption of data or disruption of operations or transactions, any of which could have a material adverse effect on our business.

We will not be insured against all potential losses and could be seriously harmed by natural disasters, catastrophes, pandemics, theft, or sabotage.

Our products are currently produced at a single location, and many of our business activities involve or will involve substantial investments in manufacturing. Our facility could be materially damaged by natural disasters such as floods, tornados, hurricanes (particularly given our location in South Florida), fires, earthquakes, pandemics or by theft or sabotage. We could incur uninsured losses and liabilities arising from such events, including damage to our reputation, and/or suffer material losses in operational capacity, which could have a material adverse impact on our business, financial condition, and results of operations.

We could face potential product liability and warranty claims, we may not accurately estimate costs related to such claims, and we may not have sufficient insurance coverage available to cover such claims.

Our products are anticipated to be used in a wide variety of residential, commercial, and industrial applications. We face an inherent business risk of exposure to product liability or other claims in the event our products are alleged to be defective or that the use of our products is alleged to have resulted in harm to others or to property. We may, in the future, incur liability if product liability lawsuits against us are successful. Moreover, any such lawsuits, whether successful or not, could result in adverse publicity to us, which could cause our sales to decline. We maintain insurance coverage to protect us against product liability claims, but that coverage may not be adequate to cover all claims that may arise, or we may not be able to maintain adequate insurance coverage in the future at an acceptable cost. Any liability not covered by insurance or that exceeds our established reserves could materially and adversely impact our business, financial condition, and results of operations. In addition, consistent with industry practice, we provide warranties on many of our products. We may experience costs of warranty claims (limited to replacement) when the product is not performing to the satisfaction of the claimant even though it has not caused harm to others or property. We estimate our future warranty costs based on historical trends and product sales, but we may fail to accurately estimate those costs and thereby fail to establish adequate warranty reserves for them. Warranty claims are not insurable.

Risks Related to Our Securities

There is a risk that we may not be able to consummate our contemplated Re-IPO.

Under the terms of our August 2021 Private Placement, we are required to conduct a new public offering (“Re-IPO”) whereby we will seek to raise additional funding in a registered underwritten offering and concurrently list our common stock on a national securities exchange. We are presently in default of our obligations under the terms of the August 2021 Private Placement to file a registration statement for the Re-IPO and are accruing liquidated damages as a result to the investors in the August 2021 Private Placement, which we may not have the cash resources to pay. Moreover, investors are cautioned that the Re-IPO may not take for any number of reasons, many of which are beyond our control. You should not invest in our company in reliance on the fact that the Re-IPO will take place. If the Re-IPO does not occur, our common stock would still be quoted on the OTCQB Market, but your opportunity for liquidity in your common stock would be significantly limited.

Future sales of our common stock on the public market could lower the price of our common stock and impair our ability to raise funds in future securities offerings.

We may issue a significant number of shares of common stock upon conversion of outstanding convertible notes, or upon exercise of warrants, including the Warrant as and Warrant Bs issued in our August 2021 Private Placement and our early 2022 private placement. As of the date of this Annual Report, approximately 153,681,049 shares of common stock are reserved for issuance under our outstanding convertible notes, options, and warrants. Future sales of a substantial number of shares of our common stock in the public market, or the perception that such sales may occur, could adversely affect the then prevailing market price of our common stock, and could make it more difficult for us to raise funds in the future through private or public offerings of our securities.

Because the market for our common stock is limited, persons who purchase our common stock may not be able to resell their shares at or above the purchase price paid for them.

Our common stock is listed for quotation on the OTCQB Market, which is not as liquid a market as a national securities exchange such as NASDAQ. There is currently only a limited public market for our common stock. We cannot assure you that an active public market for our common stock will develop or be sustained in the future. If an active market for our common stock does not develop or is not sustained, the price may decline.

Trading in our common stock is subject to special sales practices and may be difficult to sell.

Our common stock is subject to the SEC’s “penny stock” rule, which imposes special sales practice requirements upon broker-dealers who sell such securities to persons other than established distributors or accredited investors. Penny stocks are generally defined to be an equity security that has a market price of less than $5.00 per share. For transactions covered by the rule, the broker-dealer must make a special suitability determination for the purchaser and receive the purchaser’s written agreement to the transaction prior to the sale. Consequently, the rule may affect the ability of broker-dealers to sell our securities and also may affect the ability of our stockholders to sell their securities in any market that might develop.

Stockholders should be aware that, according to the SEC, the market for penny stocks has suffered from patterns of fraud and abuse. Such patterns include:

Our management is aware of the abuses that have occurred historically in the penny stock market. Although we do not expect to be able to dictate the behavior of the market or of broker-dealers who participate in the market, management will strive within the confines of practical limitations to prevent the described patterns from being established with respect to our common stock.

Because we may not be able to attract the attention of major brokerage firms, it could have a material impact upon the price of our common stock.

It is not likely that securities analysts of major brokerage firms will provide research coverage for our common stock since the firm itself cannot recommend the purchase of our common stock under the penny stock rules referenced in an earlier risk factor. The absence of such coverage limits the likelihood that an active market will develop for our common stock. It may also make it more difficult for us to attract new investors at times when we acquire additional capital.

The conversion of our outstanding secured convertible promissory note will result in dilution to existing stockholders and could negatively affect the market price of our common stock.

At the date of this Annual Report, we have an outstanding 20% secured promissory note in the aggregate principal amount of $2,144,357, convertible at the option of the principal holder (a trust associated with one of our directors, Ronald J. LoRicco, Sr., which trust acts as agent for all noteholders) into shares of our common stock at a price per share equal to $0.275. If this note is converted into shares of common stock, our issued and outstanding shares would increase. In the event a market for our common stock develops, to the extent that the holder of this note converts such note, our existing shareholders will experience dilution to their ownership interest in our company. In addition, to the extent that the holder converts such a note and then sell the underlying shares of common stock in the open market, our common stock price may decrease.

The principal holder of our outstanding secured convertible promissory note (which holder is associated with one of our directors) has rights which are senior to the rights of our common stockholders, and which may impair our financing efforts.

The principal holder of the $2,144,357 convertible note mentioned above (a trust associated with one of our directors, Ronald J. LoRicco, Sr., which trust acts as agent for all noteholders) is party to a security agreement with us granting such holder a secured interest in all of our assets. In addition, our agreements with this principal noteholder contain a negative covenant explicitly requiring such holder’s consent in order for us to incur any debt or issue of any equity securities. The interests of such debt holders are senior to the rights of our common stockholders and may impede our ability to obtain new financing. Furthermore, such holder’s interest may not coincide with the interests of other stockholders, and such holder may become subject to conflicts of interest given its affiliation with one of our directors. These conflicts may not be resolved in favor of our common stockholders.

On September 15, 2022, the Company extended the debt for a newly issued amended and restated secured convertible promissory note with a new principal balance of $2,144,357 bearing an interest rate of 20% per annum due and payable February 12, 2024. No additional consideration was provided. As of this filing the note remains unpaid, and no entry of default has been provided to the company. The company fully expects an extension of the terms to be completed.

The interests of our principal stockholders, officers, and directors, who collectively and beneficially own approximately 38.40% of our stock, may not coincide with yours and such stockholders will have the ability to substantially influence decisions with which you may disagree.

As of the date of this Annual Report, our principal stockholders, officers, and directors beneficially owned approximately 38.4% of our common stock. As a result, our principal stockholders, officers, and directors will have the ability to substantially influence matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions. In addition, this concentration of ownership may delay or prevent a change in control of our company and make some future transactions more difficult or impossible without the support of our controlling stockholders. The interests of such stockholders may not coincide with your interests or the interests of other stockholders.

Certain accredited investors control large blocks of restricted common stock. The sale of large blocks of common stock could materially impact our stock price.

Historically, we have raised funds from accredited investors through the sale of restricted common stock. Generally, common stock sold privately to accredited investors has certain resale restrictions under the securities laws that include elements of minimum holding periods, certain other requirements with respect to financial filings of our company and other requirements. Once these requirements are met, holders of the restricted common stock are able to remove resale restrictions and sell freely in the open market. As our common stock has a limited market for resale, a substantial additional supply of stock caused by previously restricted stock coming into the market for resale could have a materially, negative impact on our stock price.

The issuance of preferred stock could grant rights to investors that are not enjoyed by the holders of our common stock.

Our articles of incorporation authorize the Board of Directors, without approval of the shareholders, to cause shares of preferred stock to be issued in one or more series, with the numbers of shares of each series to be determined by the Board of Directors. Our articles of incorporation further authorize the Board of Directors to fix and determine the powers, designations, preferences and relative, participating, optional or other rights (including, without limitation, voting powers, preferential rights to receive dividends or assets upon liquidation, rights of conversion or exchange into common stock or preferred stock of any series, redemption provisions and sinking fund provisions) between series and between the preferred stock or any series thereof and the common stock, and the qualifications, limitations or restrictions of such rights. In the event of issuance, preferred stock could be used, under certain circumstances, as a method of discouraging, delaying, or preventing a change of control of our company. Although we have no present plans to issue additional series or shares of preferred stock, we can give no assurance that we will not do so in the future.

Our inability to remain current on our required securities filings may impact liquidity for certain shareholders and our ability to raise funds.

We rely on third parties to assist us with the preparation of our public filings. Our financial resources may not be sufficient from time to time to be able to cover the costs associated with these third parties’ services. Failure to remain current on certain public filings may limit the ability of shareholders to avail themselves of safe harbors when attempting to sell their shares, for example under Rule 144 of the Securities Act of 1933, as amended. In addition, our inability to present current financial information may impact our ability to raise additional funds and would further require us to pay cash liquidated damages to the investors in the August 2021 Private Placement.

The number of shares of our common stock issuable upon the exercise outstanding warrants is substantial.

As of the date of this Annual Report, we had warrants outstanding that were exercisable for an aggregate of 142,434,090 shares of common stock. The shares of common stock issuable upon exercise of these warrants are substantial, currently constituting approximately 57% of the total number of shares of common stock currently issued and outstanding. Therefore, the exercise of a large number of these warrants and public sales of the shares of common stock underlying these warrants would cause substantial dilution to our stockholders and could adversely impact the price of our common stock from time to time. The timing for such dilution and adverse price impact is uncertain as we have no control over when warrants held by third parties will be exercised. For more information regarding the terms of our warrants, please refer to the footnotes accompanying the audited and unaudited financial statements included as part of this Annual Report.

Adjustments to the conversion price for certain of our warrants will dilute the ownership interests of our existing stockholders.

Under the terms of certain of our outstanding warrants (notably the Warrant As and Warrant Bs issued in our August 2021 and January 2022 private placements), the exercise price of such warrants may be adjusted downward in certain circumstances. If a downward adjustment were to occur in the exercise price of such warrants, the exercise of such warrants would result in the issuance of a significant number of additional shares of our common stock and cause significant dilution. Moreover, the public sale of such shares could adversely impact the price of our common stock from time to time.

Even if a market for our common stock develops, the market price of our common stock may be significantly volatile, which could result in substantial losses for purchasers.

The market price for our common stock may be significantly volatile and subject to wide fluctuations in response to factors, including the following:

In some cases, following periods of volatility in the market price of a company’s securities, stockholders have often instituted class action securities litigation against those companies. Such litigation, if instituted, could result in substantial costs and diversion of management attention and resources, which could significantly harm our business operations and reputation.

Future sales of our common stock in the public market could lower the price of our common stock and impair our ability to raise funds in future securities offerings.

We may issue a significant amount of shares of common stock in the future, including shares of common stock upon conversion of preferred stock or convertible notes we have or may issue, or upon the exercise of warrants currently outstanding or which we may issue in the future. Future sales of a substantial number of shares of these shares of common stock in the public market, or the perception that such sales may occur, could adversely affect the then prevailing market price of our common stock, and could make it more difficult for us to raise funds in the future through public or private offerings of our securities.

You may face significant restrictions on the resale of your shares due to state “blue sky” laws.

Each state has its own securities laws, often called “blue sky” laws, which (1) limit sales of securities to a state’s residents unless the securities are registered in that state or qualify for an exemption from registration, and (2) govern the reporting requirements for broker-dealers doing business directly or indirectly in the state. Before a security is sold in a state, there must be a registration in place to cover the transaction, or it must be exempt from registration. The applicable broker-dealer must also be registered in that state.

We do not know whether our securities will be registered or exempt from registration under the laws of any state. A determination regarding registration will be made by those broker-dealers, if any, who agree to serve as market makers for our common stock. We have not yet applied to have our securities registered in any state and will not do so until we receive expressions of interest from investors resident in specific states after they have viewed this Annual Report. There may be significant state blue sky law restrictions on the ability of investors to sell, and on purchasers to buy, our securities. You should therefore consider the resale market for our common stock to be limited, as you may be unable to resell your shares without the significant expense of state registration or qualification.

Actions of activist shareholders could be disruptive and potentially costly and the possibility that activist shareholders may seek changes that conflict with our strategic direction could cause uncertainty about the strategic direction of our business.

Activist investors or other stockholders who disagree with our management (including legacy stockholders of our company from a time prior to the commencement of our current business plan) may attempt to effect changes in our strategic direction and how our company is governed or may seek to acquire control over our company. Some investors (commonly known as “activist investors”) seek to increase short-term stockholder value by advocating corporate actions such as financial restructuring, increased borrowing, special dividends, stock repurchases, or even sales of assets or the entire company. Activist campaigns can also seek to change the composition of our Board of Directors, and campaigns that contest or conflict with our strategic direction could have an adverse effect on our results of operations and financial condition as responding to proxy contests and other actions by activist shareholders can disrupt our operations, be costly and time-consuming, and divert the attention of our Board of Directors and senior management from the pursuit of our business strategies. In addition, perceived uncertainties as to our future direction that can arise from potential changes to the composition of our Board of Directors sought by activists may lead to the perception of a change in the direction of the business, instability or lack of continuity which may be exploited by our competitors, may cause concern to our current or potential customers or other partners, may result in the loss of potential business opportunities and may make it more difficult to attract and retain qualified personnel and business partners. These types of actions could divert our management’s attention from our business or cause significant fluctuations in our stock price based on temporary or speculative market perceptions or other factors that do not necessarily reflect the underlying fundamentals and prospects of our business, all of which could have a material adverse effect on our company.

Our ability to use our net operating losses and research and development credit carryforwards to offset future taxable income may be subject to certain limitations.

In general, under Sections 382 and 383 of the Internal Revenue Code of 1986, as amended (or the Code), a corporation that undergoes an “ownership change,” generally defined as a greater than 50% change by value in its equity ownership over a three-year period, is subject to limitations on its ability to utilize its pre-change net operating losses (or NOLs) and its research and development credit carryforwards to offset future taxable income. Our existing NOLs and research and development credit carryforwards may be subject to limitations arising from previous ownership changes, and if we undergo an ownership change, our ability to utilize NOLs and research and development credit carryforwards could be further limited by Sections 382 and 383 of the Code. In addition, our ability to deduct net interest expense may be limited if we have insufficient taxable income for the year during which the interest is incurred, and any carryovers of such disallowed interest would be subject to the limitation rules similar to those applicable to NOLs and other attributes. Future changes in our stock ownership, some of which might be beyond our control, could result in an ownership change under Section 382 of the Code. For these reasons, in the event we experience a change of control, we may not be able to utilize a material portion of the NOLs, research and development credit carryforwards or disallowed interest expense carryovers, even if we attain profitability.

If securities or industry analysts do not publish research or reports about our business, or if they change their recommendations regarding our stock adversely, our stock price and trading volume could decline.

The trading market for our common stock will be influenced by the research and reports that industry or securities analysts publish about us or our business. We do not currently have and may never obtain research coverage by industry or financial analysts. If no or few analysts commence coverage of us, the trading price of our stock would likely decrease. Even if we do obtain analyst coverage, if one or more of the analysts who cover us downgrade our stock, our stock price would likely decline. If one or more of these analysts cease coverage of us or fail to regularly publish reports on us, we could lose visibility in the financial markets, which in turn could cause our stock price or trading volume to decline.

Anti-takeover provisions in our charter documents and Nevada law could discourage, delay, or prevent a change in control of our company and may affect the trading price of our common stock.

We are a Nevada corporation, and the anti-takeover provisions of the Nevada law may discourage, delay or prevent a change in control by, among other things: (i) prohibiting us from engaging in a business combination with an interested stockholder for a period of three years after the person becomes an interested stockholder, even if a change in control would be beneficial to our existing stockholders and (ii) making it more difficult to remove our directors and officers, which might discourage transactions that could involve payment to stockholders of a premium over the market price of our securities.

In addition, our certificate of incorporation, as amended, and our amended and restated bylaws may discourage, delay, or prevent a change in our management or control over us that stockholders may consider favorable. In particular, our certificate of incorporation, as amended, and our amended and restated bylaws, among other matters:

The financial and operational projections that we may make from time to time are subject to inherent risks.

The projections that our management may provide from time to time (including, but not limited to, those relating to potential peak sales amounts, product approval, production and supply dates, commercial launch dates, and other financial or operational matters) reflect numerous assumptions made by management, including assumptions with respect to our specific as well as general business, economic, market and financial conditions and other matters, all of which are difficult to predict and many of which are beyond our control. Accordingly, there is a risk that the assumptions made in preparing the projections, or the projections themselves, will prove inaccurate. There will be differences between actual and projected results, and actual results may be materially different from those contained in the projections. The inclusion of the projections in this Annual Report should not be regarded as an indication that we or our management or representatives considered or consider the projections to be a reliable prediction of future events, and the projections should not be relied upon as such.

We do not intend to pay dividends on our common stock.

We have never declared or paid any cash dividend on our common stock. We currently intend to retain any future earnings and do not expect to pay any dividends for the foreseeable future. Therefore, you should not invest in our common stock in the expectation that you will receive dividends.

None.

In the normal course of our operations, we engage third-party service providers to enhance our operational efficiency and customer service capabilities. One such provider is Intuit Inc., which facilitates our credit card processing services. Our engagement with Intuit is governed by a framework of agreements that emphasize data protection and cybersecurity as foundational elements. We rely on Intuit's robust security measures, which are designed to protect the integrity and confidentiality of credit card transaction data. These measures include data encryption, fraud monitoring, and compliance with the Payment Card Industry Data Security Standard (PCI DSS).

While we have confidence in Intuit's cybersecurity practices, we acknowledge that no system of data security can be guaranteed to be invulnerable. The potential risks associated with our credit card processing operations include, but are not limited to, unauthorized access to or disclosure of customer data, financial loss, and reputational damage. To mitigate these risks, we regularly review our cybersecurity policies and procedures and the cybersecurity practices of our third-party providers, including Intuit. We also maintain cybersecurity insurance to provide an additional layer of financial protection.

Investors are advised that, despite our efforts to ensure the security of customer data processed through Intuit, cybersecurity incidents can occur. In the event of a breach or significant cybersecurity incident, our operations, financial condition, and reputation could be adversely affected. We are committed to promptly addressing any such incidents, should they arise, in compliance with applicable laws and regulations.

Our principal office is leased and located at 2660 N.W. 15^th Court, Unit 108, Pompano Beach, FL 33069. The lease is for approximately 1,500 square feet of space, which includes our corporate office and our production floor. We do not believe the facility is adequate to support our current operations, although we have and may continue to explore securing alternative or additional manufacturing or corporate facilities.

In the ordinary course of operations, the Company may become a party to legal proceedings which could have a material adverse effect on our business, financial condition, cash flows, or results of operations.

From time to time, we may become involved in legal proceedings that, individually or in the aggregate, could have a material adverse effect on our business, financial condition, cash flows, or results of operations.

As of the date of this report, the Company has filed a lawsuit in the state of South Carolina against Upstate Custom Products, LLC. The lawsuit is based on the contract entered into by both parties on August 2021 in relation to the manufacturing of the protrusion machines exclusively manufactured by Upstate Custom Products. LLC. As of this filing the lawsuit and claim for relief is ongoing.

On or about October 2023, the Company was served notice of a pending matter of litigation with GS Capital Partners of New York regarding the liquidated damages fees from the 2021 PIPE investment. As of this filing the matter remains unresolved.

Due to our cash flow and liquidity challenges, we have received demand letters from a number of vendors to our company seeking payment of past due amounts to such vendors. As of the date of this report, such demands have not become formal litigations or other proceedings against our company, but they may become litigations against us in the future.

Except as set forth above, as of the date of this report, we are not aware of any proceedings pending against our company.

Not Applicable.

PART II

Market Information and Number of Stockholders

Our common stock is listed on the OTCQB Market under the symbol “BASA”, and it trades on a limited basis. The following table sets forth the range of high and low closing sales prices of our Common Stock for the last two fiscal years.

The closing sales price on April 15, 2024, was $0.01 per share. All quotations provided herein reflect inter-dealer prices, without retail mark-up, markdown, or commissions.

In the event a public market for our common stock is sustained in the future, sales of our common stock may be made by holders of our public float or by holders of restricted securities in compliance with the provisions of Rule 144 of the Securities Act of 1933. In general, under Rule 144, a non-affiliated person who has satisfied a six-month holding period in a fully reporting company under the Securities Exchange Act of 1934 may, sell their restricted Common Stock without volume limitation, so long as the issuer is current with all reports under the Exchange Act in order for there to be adequate public information disclosed. Affiliated persons may also sell their common shares held for at least six months, but affiliated persons will be required to meet certain other requirements, including manner of sale, notice requirements and volume limitations. Non-affiliated persons who hold their common shares for at least one year will be able to sell their shares without the need for there to be current public information in the hands of the public. Future sales of shares of our public float or by restricted common stock made in compliance with Rule 144 may have an adverse effect on the then prevailing market price, if any, of our common stock.

As of March 31, 2024, there were 277 holders of record of our common stock. In addition, we believe that a significant number of beneficial owners of our common stock hold their shares in nominee or in “street name” accounts through brokers, and any such beneficial owners are not included in this number of holders of record.

Dividend Policy

We have never declared or paid cash dividends on our common stock. We currently do not anticipate paying any cash dividends or other dividends for the foreseeable future. Any future determination to declare cash dividends will be made at the discretion of our board of directors, subject to applicable laws, and will depend on our financial condition, results of operations, capital requirements, general business conditions and other factors that our board of directors may deem relevant.

Repurchases of Common Stock

Not applicable.

Unregistered Sales of Equity Securities

All of the issuances referred to in this section were issued pursuant to exemptions from registration under the Securities Act of 1933, as amended, provided for under Section 4(a)(2) or Regulation D under such Act.

Issuances in the first quarter of 2024

None.

Issuances 2023

On April 6, 2023, we entered into an agreement with Thomas Richmond and Michael Giorgi, respectively. An issuance of 1,000,000 shares were issued to each individual in consideration for services in the roles of Acting Interim Chief Executive Officer and Chief Growth officer, respectively.

Issuances in 2022

On January 28, 2022 and February 3, 2022, we conducted the initial closings of a private placement offering consisting of up to $5,000,000 of units at a price of $0.33 per Unit. Each Unit consists of: (i) one share of our common stock (ii) a five-year, immediately exercisable warrant (“Warrant A”) to purchase one share of common stock at an exercise price of $0.33 per share and (iii) an additional five-year, immediately exercisable warrant to purchase one share of common stock at $0.33 per share. At these initial closings, an aggregate of $600,000 worth of Units were sold. The investors participating in the initial closings included affiliates of USS, one of our strategic commercial partners (including Manuel Rodriguez, one of our directors and individuals or entities with whom USS and its affiliates do business within the construction industry (collectively, “Strategic Investors”. We anticipate that all investors in this offering will qualify as Strategic Investors who are introduced to the us by Mr. Rodriguez and his associates. In connection with these initial closings, we entered into definitive securities purchase agreements with the Strategic Investors and issued an aggregate of 1,818,182 shares of common stock, Warrant As to purchase up to an aggregate of 1,818,182 shares of common stock, and Warrant Bs to purchase up to an aggregate of 1,818,182 shares of common stock (for an aggregate of 3,636,364 warrant shares). This offering is ongoing as of the date of this Annual Report.

On February 7, 2022 pursuant to a private placement of Common Stock the Company issued 4,242,424 five-year, immediately exercisable warrants to purchase one share of Common Stock at $0.33 per share. See note 8. On March 25, 2022, the Company issued warrants to its Chief Executive Officer pursuant to an employment agreement: (i) five-year warrants to purchase 1,000,000 shares of Common Stock at a price of $0.33 per share and an issuance date fair value of $166,823, vesting immediately. The additional 1,000,000 warrants provided within the agreement for Mr. Kay expired and were not issued in relation to his resignation in November of 2022.

On March 24, 2022, the Company issued 300,000 shares of Common Stock with a contract price of $0.33 per share to a service provider for investor relations services. These shares were valued for accounting purposes at the commitment date market price of $0.193 per share for a total value of $57,900; $14,797 of this amount was amortized to non-cash compensation during the three months ended March 31, 2022.

Effective March 25, 2022, the Company issued a five-year warrant to purchase 2,000,000 shares of Common Stock at an exercise price of $0.33 per share to its Chief Executive Officer pursuant to an employment agreement. Warrants to 1,000,000 shares with a grant date fair value of $166,823 vested upon issuance, and a warrant to purchase 1,000,000 shares with a grant date fair value of $166,823 will vest one year from the date of issuance. The Company charged the amount of $169,565 to stock-based compensation during the three months ended March 31, 2022 in connection with these warrants.

Pursuant to her employment agreement with the Company, Jackie Placeres, the Company’s Acting Interim Chief Financial Officer, is entitled to receive options to purchase Common Stock which vest in quarterly increments over time. The initial tranche of options vested on December 15, 2022, but as a courtesy to the Company. Mrs. Placeres has waived her right to such options.

You should read the following discussion and analysis together with the consolidated financial statements and the related notes to those statements included in “Item 8 – Consolidated Financial Statements and Supplementary Data.” The discussion contains forward-looking statements that involve risks and uncertainties. As a result of many factors, such as those set forth under “Risk Factors” and elsewhere in this Annual Report on Form 10-K, our actual results may differ materially from those anticipated in these forward-looking statements.

Overview

The following is a high-level discussion of our operating results and some of the trends that affect our business. We believe that an understanding of these trends is important to understand our financial results for the years ended December 31, 2023, and 2022. This summary is not intended to be exhaustive, nor is it intended to be a substitute for the detailed discussion and analysis provided elsewhere in this Annual Report, and our audited and unaudited consolidated financial statements and accompanying notes included in this Annual Report.

On May 30, 2006, our company was formed as a Nevada corporation under the name Nevada Processing Solutions, Inc. Currently, through our wholly owned subsidiary, Basanite Industries, LLC, a Delaware limited liability company (“BI”), we manufacture a range of “green” (environmentally friendly), sustainable, non-corrosive, lightweight, composite products used in concrete reinforcement by the construction industry. Our core product is BasaFlex™, a basalt fiber reinforced polymer reinforcing bar (“rebar”) which we believe is a stronger, lighter, sustainable, non-conductive, and corrosion-proof alternative to traditional steel.

Our two other main product lines are BasaMix™, which are fine denier basalt fibers available in various chopped sizes, and BasaMesh™, a line of Basalt Geogrid Mesh Rolls, intended to replace welded wire mesh (made of steel) and other fiber reinforced polymer grids and mesh.

While we believe our products have great market potential and have begun to gain some acceptance in the market (as evidenced by the beginning of revenue growth which occurred in 2021 as discussed below), we are currently conducting relatively limited operations due to a lack of adequate funding. We are working to secure additional funding to increase our manufacturing capacity to meet what we believe will be increasing demand for our products, but until such funding is obtained, there will remain substantial doubt regarding our ability to continue as a going concern.

Material Factors Impacting Our Operations

COVID-19

The pandemic caused by the novel coronavirus (known as “COVID-19”) and governmental and other efforts to curb the spread of the pandemic had caused great disruption to the U.S. national and international economies. We were adversely impacted by COVID-19 in that we were required to temporarily suspend operations during 2020 due to necessary quarantines, and the impact of COVID-19 on the construction industry we service has been significant. Government mandated shutdowns and other measures held less of an impact on our business during 2021 and 2022, although we did have personnel absent for periods during both years due to COVID-19. Moreover, the continued prevalence of COVID-19 or outbreaks of new variants thereof disrupted our supply chain, as well as our own operations due to absenteeism by infected or ill members of management or other employees, or absenteeism by members of management and other employees who elected not to come to work due to illness affecting others in our office or plant, or due to additional necessary quarantines. COVID-19 also impacted members of our Board of Directors as well as key providers of services to us, which adversely impacted the management of our affairs. Additionally, as the COVID-19 pandemic continue to develop, we may be required to continue to spend time and resources in monitoring and adhering to government regulations that impact both our company and our customers and potential customers as necessary, which could also adversely impact our business and results of operations. We continue to monitor our operations and applicable government recommendations and requirements.

Inflation & Interest Rate Sensitivity

In the past fiscal years, inflation has not had a significant impact on our business. However, during the second half of 2021, throughout 2022 and into 2023, the U.S. economy has entered into a period of increasing inflation. Should inflation persist or increase, interest rates rise and could have a significant effect on the economy in general and, thereby, could affect prices for raw materials we use, demand for our products, our ability to attract and retain skilled labor and our future operating results.

Supply Chain

In the past year, supply chain shortages or delays have had an immaterial impact on our operations. Relationships with our raw materials suppliers have maintained a consistent flow of goods received monthly. Domestic suppliers have increased their in-stock flows to maintain adequate levels for our manufacturing needs. However, we might experience supply chain challenges in the future, which could harm our business and our results of operations.

War in Ukraine

The recent war in Ukraine has led the world to issue sanctions on the government of Russia. This has shut down our ability to procure basalt fiber material from our secondary supplier, UWF/Kamenny Vek. However, our primary supplier Mafic is US based, and has ample capacity to support our current and anticipated future needs with 100% domestic source of raw materials. Nonetheless, we are currently qualifying alternate material from other suppliers to preserve our options.

Government Approvals and Specifying of our Products

We continue to pursue additional product and facility qualifications and approvals, and these qualifications and approvals are critical to the market acceptance of our products. BI is currently testing products at two independent laboratories and received ICC-ES certification, which was granted in the second quarter of 2023, and a Florida Department of Transportation (“FDOT”) production facility and product approval, which was also granted in the second quarter of 2023 (we are already selling to FDOT projects on an individual basis through exemptions or specs). The FDOT approval will allow us to bid on any project approved for BFRP. We anticipate that with these two approvals the prospects of new projects will increase.

Results of Operations

Revenue – We had $376,096 of revenues as a result of sales of finished goods sold for the year ended December 31, 2023, compared to $1,356,165 in the prior year. While the decrease in revenue in the year over year periods was material due to our ability to sell some BasaFlex™ product in 2023, overall revenues have been minimal due to our lack of funding and as a result of our limited manufacturing capabilities as we await the new BasaMax equipment.

Cost of goods sold – During the year ended December 31, 2023, we had cost of sales of $248,313compared to $2,025,926 in the prior year. During 2023, we lost money on a gross margin basis due to normal inefficiencies in the start-up and ramping and scaling process, including limited initial sales volume, and further due to extremely narrow margins on the initial sales of our products as we began introducing them to the marketplace as well as limited manufacturing capabilities.

Operating Expenses

Selling, general, and administrative expenses – During the year ended December 31, 2023, selling, general, and administrative were $1,730,733 compared to $3,585,955 in the prior year. The primary components of selling, general, and administrative expenses were as follows:

Other Income (Expenses)

Interest expense - During the year ended December 31, 2023, interest expense was $566,429 compared to $512,162 in the prior year. The increase is primarily due to an increase in the principal amount of debt outstanding during the current period.

Liquidity and Capital Resources

Since inception, we have incurred net operating losses and generated negative cash flows in operations. As of December 31, 2023, we had an accumulated deficit of $56,262,389. At December 31, 2023, we had cash of $55,248 compared to $$30,340 at December 31, 2022, and as of the date of this Annual Report, we have minimal cash on hand, and any funds we can presently raise (either from revenue generating operations or through investment) are rapidly consumed.

Also, we have incurred and continue to incur significant general and administrative and other expenses associated with our product development and the establishment and proposed expansion of our manufacturing facility, beginning revenue generating operations, developing our business model, stock-based compensation and operating as a public company. We expect operating losses to continue for the foreseeable future, and we presently require and expect to continue to require substantial additional financing for continued support of our BFRP manufacturing business until we can generate sufficient revenues to achieve positive cash flow.

Furthermore, we currently owe approximately $2,144,357 plus $554,595 of accrued interest under a 20% Convertible Promissory Note held by The Richard A. LoRicco Sr. and Lucille M. LoRicco Irrevocable Insurance Trust DTD 4/28/95, which is a related party associated with our director Ronald LoRicco. This note matured on February 12, 2024, and as of the date of this Annual Report, no event of default has been called by the note holder.

In addition, throughout 2023, we entered into several simple Promissory Notes with certain related parties and their associates for total proceeds $1,145,000. These notes each carried a 12-month term at interest between 10% to 20% simple interest and are now due or about to come due. The accumulated interest under these notes is currently approximately $287,725. Given our limited cash resources at this time, we have been unable to repay this indebtedness. While we may seek to extend the maturity dates of this indebtedness, we may be unsuccessful in doing so. If all or any of these note holders elect to call an event of default under these notes, we may have increased difficulty raising additional funds and we could be forced into bankruptcy.

All of these conditions raise substantial doubt about our ability to continue as a going concern.

We have historically satisfied our working capital requirements through the sale of restricted common stock and the issuance of warrants and promissory notes. We will continue our fundraising efforts until we have obtained positive cash flow to cover our expenses. No assurances can be given that the Company will be successful in raising future capital.

Notwithstanding proceeds from the sale of our common stock in early 2022, current working capital and projected sales revenue are insufficient to maintain our current operations. In order to scale up our manufacturing operations and reach a level of sales revenue sufficient to provide positive cash flow, we require funding of about 5 million dollars for both our expansion plan and our operating deficit through the scaling period. We will attempt to raise this capital through third party financing, including a private placement and/or public offering of our securities as well as bridge loan arrangements. We cannot provide any assurances that the required capital will be obtained or if financing is available, that the terms of such required financing may be acceptable to us. If we are unable to obtain adequate financing, we may reduce our operating activities to reduce our cash use until sufficient funding is secured, and our business might fail.

Cash Flows

Net cash used in operating activities amounted to $1,055,849 and $2,830,650 for the years ended December 31, 2023 and 2022, respectively. During the year ended December 31, 2023, we received $0 net cash for investing activities compared to $271,885 used in the prior fiscal year. The decrease is largely due to costs associated with the customization, installation, and verification and validation testing of the first BasaMax™ prototype pultrusion machine, for the modifications and UL listing of the production machinery and the final payments for the enhancements made to our production facility as compared to the deposits made on machinery and equipment in the prior year compared to the present year.

During the year ended December 31, 2023, we had $0 net cash provided by financing activities compared to $1,300,532 in the prior year. Sale of common stock shares for $649,951 from the issuance of convertible and short-term notes payable, including from related parties; less $605,000 of principal repayments on notes and convertible notes, including to related parties, provided the net cash during the year ended December 31, 2022.

Summary of Critical Accounting Policies

Inventory

The Company’s inventories consist of raw materials, work in process and finished goods, both purchased and manufactured. The Company does not possess at present any inventories from which to manufacture or sell finished goods.

Use of Estimates

The preparation of the accompanying Consolidated Financial Statements in conformity with accounting principles generally accepted in the United States of America, or GAAP, requires management to make certain estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the Consolidated Financial Statements and reported amounts of expenses during the reporting period. Actual results could differ from those estimates.

Stock-based compensation and stock awards related to convertible debt instruments are recognized based on the fair value of the awards granted. The fair value of each award or conversion feature is estimated on the grant date using the Black-Scholes pricing model. The Black-Scholes pricing model requires the input of highly subjective assumptions, including the fair value of the underlying common stock, the expected term of the option, the expected volatility of the price of our common stock, risk-free interest rates and the expected dividend yield of our common stock. The assumptions used to determine the fair value of the stock awards represent management’s best estimates. These estimates involve inherent uncertainties and the application of management’s judgment.

Recent Accounting Pronouncements

There are several new accounting pronouncements issued or proposed by the FASB. Each of these pronouncements, as applicable, has been or will be adopted by us. Management does not believe any of these accounting pronouncements has had or will have a material impact on our consolidated financial position or operating results. See note 3 to the accompanying audited financial statements for further information.

Not applicable.

The requirements of this Item can be found beginning on page F-1 found elsewhere in the Annual Report.

None.

Disclosure Controls and Procedures

We maintain disclosure controls and procedures, as defined in Rules 13a-15(e) and 15d-15(e) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), that are designed to be effective in providing reasonable assurance that information required to be disclosed in our reports under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the SEC, and that such information is accumulated and communicated to our management to allow timely decisions regarding required disclosure.

Our management, under the supervision and with the participation of our Acting Interim Chief Executive Officer, President and Acting interim Chief Financial Officer, carried out an evaluation of the effectiveness of the design and operation of the Company's disclosure controls and procedures (as defined in Rule 13a-15(e) and 15d-15(e) of the Exchange Act) as of December 31, 2023.

Management’s Annual Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting, as defined in rules promulgated under the Exchange Act, is a process designed by, or under the supervision of, our Acting Interim Chief Executive Officer and acting interim Chief Financial Officer and effected by our Board of Directors, management and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of Consolidated Financial Statements for external purposes in accordance with GAAP. Internal control over financial reporting includes those policies and procedures that:

Internal control over financial reporting cannot provide absolute assurance of achieving financial reporting objectives because of its inherent limitations. Internal control over financial reporting is a process that involves human diligence and compliance and is subject to lapses in judgment and breakdowns resulting from human failures. Internal control over financial reporting can also be circumvented by collusion or improper override. Because of such limitations, there is a risk that material misstatements may not be prevented or detected on a timely basis by internal control over financial reporting. However, these inherent limitations are known features of the financial reporting process, and it is possible to design into the process safeguards to reduce, though not eliminate, this risk.

Our management assessed the effectiveness of our internal control over financial reporting as of December 31, 2023. In making its assessment, management used the criteria established by the Committee of Sponsoring Organizations of the Treadway Commission, or COSO, in its 2013 Internal Control — Integrated Framework. Based on its assessment, management has concluded that our internal control over financial reporting has material weaknesses and is not effective as of December 31, 2023. The weaknesses consist of an overall lack of a sufficient control environment to produce materially correct financial statements, including a lack of US GAAP expertise for the types of transactions we have been involved in, a lack of segregation of duties, and a lack of entity level controls due to no independent audit committee.

As a result of the identified material weakness, we are working to establish remediation plan which includes hiring additional resources creating an independent audit committee and engaging outside consultants as needed to assist in the evaluation of non-recurring and unusual transactions and to increase the capacity of our accounting department to serve operational, compliance and reporting needs.

Changes in Internal Control over Financial Reporting

Except as noted above, no change in our system of internal control over financial reporting occurred during the period covered by this report that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

During the quarter ended December 31, 2023, no director or officer of the Company adopted or terminated a contract, instruction or written plan for the purchase or sale of securities of the Company intended to satisfy the affirmative defense conditions of Rule 10b5-1(c) and/or a non-Rule 10b5-1 trading arrangement.

Not applicable.

PART III

Directors and Executive Officers

The following table sets forth certain information regarding our executive officers and directors as of the date of this Form 10-K. Directors are elected annually and serve until the next annual meeting of shareholders or until their successors are elected and qualify. Executive officers are appointed by our Board of Directors and their term of office is at the discretion of our Board.

Biographical Summaries of Directors and Executive Officers

The following are biographical summaries of the experience of our directors and executive officers:

Frederick H. Tingberg, Jr., 65, has served as a member of the Board of Directors since December 2021. Mr. Tingberg is a construction industry executive with extensive experience in leading construction and rehabilitation projects. Since 2020, Mr. Tingberg has served as the Chief Executive Officer of his own construction industry consulting company, Technicon Consulting Group, and since 1993, he has served both in two capacities with Lanzo Corporation, an infrastructure construction company, first as Business Development Manager and since 2018 as Chief Operating Officer. At Lanzo, Mr. Tingberg oversaw underground infrastructure construction project operations leading 160 total staff in completing over 20 projects annually. His responsibilities included overseeing safety, environmental compliance, proposals, hard dollar bonded bidding, material selection, purchasing, financial controls, budgeting, and contracts with strategic partners. From 1984 to 1993, he served as Regional Pipe & Supply Area Manager for SEMSCO, a division of Clayton Group. Mr. Tingberg holds several state general contractor licenses and he received a B.S. degree in Materials Engineering from Rensselaer Polytechnic Institute.

Jackie Placeres, 43, previously served as the Company’s Controller since 2021. Ms. Placeres previously served as the Chief Financial Officer to ISG, a private government contractor in security and informational technologies from 2018 through May 2021. From 2014 to 2018, she served as Vice President of Smith Manufacturing growing the Company from 4 million to 18 at the time of acquisition. The Board selected Ms. Placeres to serve as the Company’s Acting Interim Chief Financial Officer because of her longstanding relationship with the Company and because of her accounting and public company reporting experience.

Ronald J. LoRicco, Sr., 59, has served as a member of our Board of Directors since June 2017. Mr. LoRicco is an attorney practicing in the areas of civil litigation, insurance defense, criminal law, estate planning and administration and workers' compensation. He is also admitted to practice in Florida and United States District Court for the District of Connecticut. Mr. LoRicco is a member of the American, Connecticut, and New Haven Bar Associations, American Trial Lawyers Association and Connecticut Trial Lawyers Association. He attended Fairfield University where he received a Bachelor of Arts degree in 1986. He received a Juris Doctor degree from Quinnipiac College School of Law, formerly known as the University of Bridgeport School of Law, in 1989. On April 11, 2024, the Board of Directors, through a vote of Unanimous Written Consent appointed Mr. Ronald LoRicco, Sr, 59, to serve as the Acting Interim Chief Executive Officer.

Paul M. Sallarulo, 67, has served as a member of our Board of Directors since April 2017. He served as Chairman of the Board, President and CEO of Nexera Medical Inc. from July 2006 through 2015. Previously, Mr. Sallarulo had an extensive financial career in capital markets and investment banking in senior positions with Wachovia Securities, where he was the Senior Vice President from July 2003 through June 2006 and Prudential Securities, where he served as Senior Vice President from October 2001 through July 2003. Additionally, Mr. Sallarulo served as Vice President at Meridian Capital Markets from February 1991 to August 1996. Mr. Sallarulo was appointed Commissioner of the North Broward Hospital District by Florida Governor Jeb Bush for two four-year terms beginning in January of 1999. While there, he oversaw four major hospitals, thirty-eight clinics, six thousand professionals, and a budget in excess of $2 billion, and served as Chairman of the Legal Review Committee from 2002 to 2005, Joint Conference Committee from 2004 to 2006, Broward Health Foundation from 2002 through 2004, Community Relations Committee for Broward General Hospital from 2002 to 2004, and Community Relations Committee for Imperial Point Medical Center from 2005 to 2006, respectively. Mr. Sallarulo served on the Board of Directors of Foss Manufacturing, LLC Company, Board of Trustees of Nova Southeastern University, Chairman of the Board of Governors of Nova Southeastern University - Wayne Huizenga School of Business, President of the International Alumni Association of NSU, Nova Southeastern University College of Dental Medicine Advisory Board, and was inducted as the first Honorary member into Sigma Beta Delta Society – International Honor Society in Business, Management and Administration. Mr. Sallarulo also served as a member of the Planning and Zoning Board of Fort Lauderdale, Broward County Personal Advisory Board Fort Lauderdale, the Fort Lauderdale Marine Advisory Board, and the Economic Development Advisory Board. Mr. Sallarulo was Co-Founder of Broward Bank of Commerce and served on the Board of Directors. Mr. Sallarulo assisted in the sale of Broward Financial Holdings, the parent company of Broward Bank of Commerce, to Home BancShares, parent company of Centennial Bank in 2014. Mr. Sallarulo currently serves on the Regional Board of Directors of Centennial Bank and serves on the Loan Committee, and Strategic Planning Committee. Mr. Sallarulo received his M.B.A from Nova Southeastern University in 1984. Previous to that, Mr. Sallarulo attended Bernard Baruch College from 1978 to 1981 where he obtained his Bachelor in Business Administration, and attended SUNY Adirondack between 1975 and 1977 where he obtained his Associate of Applied Science degree.

Adam Falkoff, 56, has served as a member of the Board of Directors since September 2020. Mr. Falkoff has over 20 years of experience in public policy, international relations, and business development. He has advised CEOs of the Fortune 100, Presidents, Prime Ministers, Cabinet Ministers and Ambassadors. Since 2000, Mr. Falkoff has served as the President of CapitalKeys, a bipartisan global public policy and strategic consulting firm based in Washington D.C. His expertise is to successfully help clientele understand, anticipate, and navigate the complex public policy environment as well as strategies for business development driving client revenues. Earlier in his career he served as professional staff in the United States Senate. Mr. Falkoff was a 2018 recipient of the Ellis Island Medal of Honor for service to the United States of America and named in the Power 100 of Washington, D.C. by Washington Life Magazine. Mr. Falkoff has been an invited guest speaker, panelist, and moderator on a wide range of public policy and business development related topics in several industries. He has appeared in The Wall Street Journal, The Palm Beach Post, Politico, Roll Call, The Hill, The Washington Diplomat, Jack O'Dwyer's Newsletter, Capitol File, Washington Life, National Journal, Technology Law Journal, Greenwire, Appliance Magazine, and The Opportunist Magazine. Mr. Falkoff received a B.A. from Duke University and both an M.B.A. and M.I.M. (Master of International Management) from the Thunderbird School of Global Management on an academic scholarship in 1992. Mr. Falkoff also holds a Certificate in International Law from the University of Salzburg, Institute on International Legal Studies.

Manuel A. Rodriguez, 62, has served as a member of the Board of Directors since December 2021. Since 2004, Mr. Rodriguez as served as a Vice President of Concrete Products of the Palm Beaches, Inc. and the President of each of U.S. Supplies, Inc. and U.S. Construction Supply, Inc. In these capacities, Mr. Rodriguez leads these companies in all of their principal activities, including concrete product manufacturing and distribution both nationally and internationally, as well as environmental engineering services. Since 2003, he has also served as a Vice President of Beton Brunet, an infrastructure products and services company, where he overseas Southeastern United States operations. Earlier in his career, Mr. Rodriguez held several positions in the construction industry, including as a General Manager of Tri-County Concrete (1992 to 2003), Master Electrician with Stallion Electric (1989 to 1992) and a Geologist with Star Petroleum (1986 to 1989). Mr. Rodriguez is a certified master electrician in the State of Florida and is associated with several construction and concrete industry trade groups. He earned his B.S. degree in Geology from the University of Florida.

Sergio S. Salani, 55, has served as a member of the Board of Directors since August 2022. Mr. Salani is a seasoned entrepreneur with experience in finance, law, real estate and technology. From 2016 to the present, Mr. Salani has served as the founder, Chief Executive Officer and General Counsel of Stoneway Group, L.L.C., an advisory firm providing services with regard to legal, finance and real estate matters, international transactions, specialty finance, technology, commercial real estate investment management and investments in the energy sector. Also from 2016 to the present, Mr. Salani has served as co-founder and Chief Executive Officer of Ubii.com, a digital marketplace that was launched in February 2021. From 2011 to 2016, he served as co-founder and Chief Executive Officer of Oxford International Group, L.L.C., a privately held financial firm that acquires high credit quality, highly illiquid assets which was sold to an affiliate of Blackstone Group. From 1997 to 2011, Mr. Salani served as partner, legal counsel and Senior Vice President of Peachtree Settlement Funding, L.L.C., an originator of specialty finance receivables such as structured settlements, lottery payment receivables and life settlements, where he was instrumental in building the company from a start-up to a 480 employee operation and in taking it public in 2006 on London's AIM Market, a sub-market of the London Stock Exchange. Mr. Salani received a Bachelor of Arts in Finance and Economics as well as a Master of Business Administration degree from Drexel University and a Juris Doctor from Temple University. He is a member of the bars of Florida and the District of Columbia.

Corporate Governance Profile

Our Board of Directors consists of six members. The terms of directors expire at the next annual shareholders’ meeting unless their terms are staggered as permitted in our Bylaws. Each shareholder is entitled to vote the number of shares owned for as many persons as there are directors to be elected. Shareholders do not have a right to cumulate their votes for directors.

Committees of the Board of Directors

We currently have an audit committee, a compensation committee, and a nominating and corporate governance committee. We have not adopted charters for our audit or compensation committees to date. The below table provides our committee members.

Audit Committee

Our Board of Directors currently does not have an “audit committee financial expert” serving on its audit committee. Our Board of Directors is currently in the process of seeking to obtain a qualified individual which meets the definition of “audit committee financial expert”.

Director Compensation

The following table provides information concerning the compensation of our Board members for their services as members of our Board of Directors for 2023 and 2022. The value attributable to any option awards is computed in accordance with FASB ASC Topic 718. The assumptions made in the valuations of the option awards are included in Note 11 of the Notes to our Financial Statements for the year ended December 31, 2023 and 2022 appearing elsewhere in this Annual Report.

For the year ended December 31, 2022:

For the year ended December 31, 2023:

Family Relationships

There are no family relationships between any of our directors or executive officers.

Involvement in Certain Legal Proceedings

None of our directors or executive officers has been convicted in a criminal proceeding, excluding traffic violations or similar misdemeanors, or has been a party to any judicial or administrative proceeding during the past ten years that resulted in a judgment, decree or final order enjoining the person from future violations of, or prohibiting activities subject to, federal or state securities laws, or a finding of any violation of federal or state securities laws, except for matters that were dismissed without sanction or settlement. Except as set forth in our discussion below in “Certain Relationships and Related Transactions”, none of our directors, director nominees or executive officers has been involved in any transactions with us or any of our directors, executive officers, affiliates or associates which are required to be disclosed pursuant to the rules and regulations of the SEC.

Code of Ethics

Our Board has adopted a Code of Ethics that applies to all of our employees, including our officers. The Code of Ethics also applies to our directors. The Code of Ethics provides written standards that we believe are reasonably designed to deter wrongdoing and promote honest and ethical conduct, including the ethical handling of actual or apparent conflicts of interest between personal and professional relationships, full, fair, accurate, timely and understandable disclosure and compliance with laws, rules and regulations, including insider trading, corporate opportunities and whistle-blowing or the prompt reporting of illegal or unethical behavior. A request for a copy can be made in writing to Basanite, Inc., 2066 N.W. 15^th Court, Pompano Beach, FL 33069, Attention: Mr. Ronald LoRicco, Sr., Chairman.

Shareholder Communications

Although we do not have a formal policy regarding communications with our Board, shareholders may communicate with the Board by writing to us at Basanite, Inc., 2066 N.W. 15^th Court, Pompano Beach, FL 33069. Attention: Mr. Ronald LoRicco, Sr., Chairman. Shareholders who would like their submission directed to a member of the Board may so specify and the communication will be forwarded, as appropriate.

Section 16(a) Beneficial Ownership Reporting Compliance

Section 16(a) of the Exchange Act requires our directors and executive officers, and persons who beneficially own more than 10% of a registered class of our equity securities, to file with the SEC initial reports of ownership and reports of changes in ownership of common stock and the other equity securities. Officers, directors and 10% beneficial owners are required by SEC regulations to furnish us with copies of all Section 16(a) forms they file. Based solely on a review of the copies of the forms furnished to us, we believe that all filing requirements were complied with during 2023, except that Mr. Richmond filed a form 4 late in April 2023.

The following table summarizes all compensation recorded by us in the last two completed fiscal years for:

For definitional purposes, these individuals are sometimes referred to as the “named executive officers”.

Employment Agreement with Thomas Richmond

We entered into an employment agreement, dated April 6, 2023, with Thomas Richmond to serve as our Acting Interim Chief Executive Officer. Thomas Richmond has been appointed as the acting Chief Executive Officer of Basanite as an independent contractor until August 31, 2023.

The company will pay him a monthly salary of $12,500 and he will also receive one million shares of restricted common stock and five warrants to purchase four million shares of common stock, exercisable at $.045 per share. Richmond will not be entitled to health, hospitalization, or other insurance or participation in a 401(k) plan during the trial period. The parties agree to negotiate a possible long-term employment agreement during the period of the final three months of the term of this Agreement. This Agreement supersedes all previous agreements and can only be amended in writing. The Agreement is governed by the internal laws of the State of Florida, and any dispute arising out of this Agreement shall be resolved in the federal and state courts located in the State of Florida, County of Broward. On September 1, 2023, the agreement was renewed for a period of 90 days, with an expiration date of December 31, 2023. During this extended period, Mr. Richmond was compensated a total of $33,333 per month. On December 21,2023 the Board of Directors agreed to not renew Mr. Richmond’s agreement and therefore the agreement expired.

Employment Agreement with Simon R. Kay

We entered into an employment agreement, dated March 25, 2022, with Simon R. Kay to serve as our Chief Executive Officer and President and Acting Interim Chief Financial Officer. Mr. Kay had been serving as our Acting Interim Chief Executive Officer, President, and Chief Financial Officer in a consulting capacity since January 13, 2020. The term of the employment agreement is for an initial period of two years and provides a base salary of $250,000 annually. Mr. Kay is also eligible to receive a cash bonus of $100,000 upon our achievement of both: (i) an uplisting of our company from the OTCQB Market to any tier of the Nasdaq, New York Stock Exchange, or NYSE American; and (ii) our achieving positive cash flow under U.S. generally accepted accounting principles for any fiscal quarter as reported in our filings with the SEC. Mr. Kay has also been issued a five-year warrant to purchase an aggregate 2,000,000 shares of our common stock at an exercise price of $0.33 per share, with a “cashless exercise” provision. One million shares of the warrant vested upon execution of the employment agreement, and the remaining one million shares vest on the first anniversary of the execution of the employment agreement. Mr. Kay’s employment agreement replaced our Transition Services Agreement with Mr. Kay described below.

On January 20, 2022, we entered into a Transition Services Agreement (the “TSA”) with Simon R. Kay. Prior to the execution of the TSA, Mr. Kay has been serving as our Acting Interim Chief Executive Officer, President and Chief Financial Officer in a consultant capacity since January 13, 2020 pursuant to a Consulting Agreement between us and Mr. Kay. Our employment agreement with Mr. Kay terminated the TSA, except for those provisions which expressly survive termination.

On November 14, 2022 the Company was provided notice of his resignation and the Board of Directors accepted. Mr. Kay’s anniversary shares with respect to his employment agreement were not issued pursuant to the terms of the agreement, no further compensation or consideration was offered. Mr. Kay is not associated with our company.

Employment Agreement with Jackie Placeres

None.

Employment Agreement with Frederick H. Tingberg, Jr.

None.

Except as otherwise disclosed above, we have not entered into employment agreements with, nor have we authorized any payments upon termination or change-in-control, to any of our executive officers or key employees.

How Compensation for our Directors and Executive Officers was Determined

During 2023, our previous Acting Chief Executive Officer, Thomas Richmond, was compensated pursuant to a consulting agreement. Our current Acting Interim Chief Financial Officer is compensated as an at-will employee. These agreements or offers were negotiated and approved by our Board of Directors.

2022 Option and Warrant Grants to Executive Officers

None.

2023 Option and Warrant Grants to Executive Officers

We entered into an employment agreement, dated April 6, 2023, with Thomas Richmond to serve as our Acting Interim Chief Executive Officer. Thomas Richmond has been appointed as the acting Chief Executive Officer of Basanite as an independent contractor until August 31, 2023. The company agreed to issue to him five warrants to purchase four million shares of common stock, exercisable at $.045 per share.

Outstanding Equity Awards at Fiscal Year-End

On August 16, 2018, as part of his compensation package for his consulting agreement, David Anderson, prior to being employed as our Chief Operating Officer, received 2,500,000 five-year warrants at a strike price of $0.1235. The expiration of 1,000,000 warrants occurred on August 15, 2023 and the balance of 1,500,000 warrants expired on September 23, 2023. No further warrants are available to Mr. Anderson as of this filing.

On March 4, 2019, as part of his compensation package for employment, Richard M. Krolewski, our former Chief Executive Officer, was granted immediate vesting in 5,000,000 warrants at a strike price of $0.1235 per share expiring in 5 years. In 2020, he sold 2,500,000 warrants in a private transaction. The private party later exercised one million warrants on January 21, 2021. The remaining 2,500,000 warrants expired on March 4, 2023.

On May 23, 2019, as part of her compensation package for employment, Isabella Barbera, our former Chief Financial Officer, was granted immediate vesting in 1,000,000 options at a strike price of $0.55 per share expiring in 10 years. These options remained outstanding at December 31, 2023.

Equity Compensation Plan Information

We do not have a formal equity incentive plan at this time, and therefore we have no securities authorized for such issuance under any such plan.

The following table shows the number of shares and percentage of all shares of common stock issued and outstanding as of the date of this Annual Report, held by any person known to us to be the beneficial owner of 5% or more of our outstanding common stock, by each executive officer and director, and by all directors and executive officers as a group. The persons named in the table have sole voting and investment power with respect to all shares beneficially owned. Unless otherwise noted below, each beneficial owner has sole power to vote and dispose of the shares and the address of such person is our corporate office at 2660 N.W. 15^th Court, Unit 108, Pompano Beach, FL 33069. Pursuant to Rule 13d-3 under the Exchange Act, a person has beneficial ownership of any securities as to which such person, directly or indirectly, through any contract, arrangement, undertaking, relationship or otherwise has or shares voting power and/or investment power or as to which such person has the right to acquire such voting and/or investment power within 60 days. The applicable percentage of ownership is based on 259,156,796 of common stock outstanding as of the date of this Annual Report.

_____________________

* Less than 1%.

Except as disclosed below, we are currently not a party to any related party transaction, including transaction in which:

Additional information regarding these transactions can be found in notes 6, 7 and 9 to the accompanying financial statements.

Transactions in 2022

On August 31, 2022 the Company issued a promissory note to a board member in exchange for $37,000 bearing an interest rate of 10% per annum and payable on August 31, 2023.

On August 22, 2022 the Company issued a promissory note to a board member in exchange for $20,000 bearing an interest rate of 10% per annum and payable on August 22, 2023.

On August 22, 2022 the Company issued a promissory note to a board member in exchange for $5,000 bearing an interest rate of 10% per annum and payable on August 22, 2023.

On August 29, 2022 the Company issued a promissory note to a board member in exchange for $25,000 bearing an interest rate of 10% per annum and payable on August 29, 2023.

On August 29, 2022 the Company issued a promissory note to a board member in exchange for $10,000 bearing an interest rate of 10% per annum and payable on August 29, 2023.

On August 31, 2022 the Company issued a promissory note to a board member in exchange for $13,000 bearing an interest rate of 10% per annum and payable on August 31, 2023.

On September 9, 2022 the Company issued a promissory note to a board member in exchange for $60,000 bearing an interest rate of 10% per annum and payable on August 16, 2023.

On September 9, 2022 the Company issued a promissory note to a board member in exchange for $10,000 bearing an interest rate of 10% per annum and payable on September 9, 2023.

On September 9, 2022 the Company issued a promissory note to a strategic partner in exchange for $10,000 bearing an interest rate of 10% per annum and payable on September 9, 2023.

On September 9, 2022 the Company issued a promissory note to a strategic partner in exchange for $15,000 bearing an interest rate of 10% per annum and payable on September 9, 2023.

On September 9, 2022 the Company issued a promissory note to an investor and advisor to the board, in exchange for $15,000 bearing an interest rate of 10% per annum and payable on September 9, 2023.

On September 22, 2022 the Company issued a promissory note to a board member in exchange for $42,500 bearing an interest rate of 10% per annum and payable on March 22, 2023.

On September 22, 2022 the Company issued a promissory note to an investor and advisor to the board in exchange for $42,500 bearing an interest rate of 10% per annum and payable on March 22, 2023.

Transactions in 2023

On February 14, 2023 the Company issued a promissory note to a board member in exchange for $10,000 bearing an interest rate of 20% per annum and payable on February 13, 2024.

On February 24, 2023 the Company issued a promissory note to a board member in exchange for $50,000 bearing an interest rate of 20% per annum and payable on February 23, 2024.

On March 3, 2023 the Company issued a promissory note to a board member in exchange for $15,000 bearing an interest rate of 20% per annum and payable on March 2, 2024.

On March 24, 2023 the Company issued a promissory note to a board member in exchange for $15,000 bearing an interest rate of 20% per annum and payable on March 23, 2024.

On April 12, 2023 the Company issued a promissory note to a board member in exchange for $150,000 bearing an interest rate of 20% per annum and payable on April 11, 2024.

On April 28, 2023 the Company issued a promissory note to a board member in exchange for $100,000 bearing an interest rate of 20% per annum and payable on April 27, 2024.

On May 12, 2023 the Company issued a promissory note to a board member in exchange for $100,000 bearing an interest rate of 20% per annum and payable on May 11, 2024.

On June 5, 2023 the Company issued a promissory note to a board member in exchange for $100,000 bearing an interest rate of 20% per annum and payable on June 4, 2024.

On July 25, 2023 the Company issued a promissory note to a board member in exchange for $200,000 bearing an interest rate of 20% per annum and payable on July 24, 2024.

On September 11, 2023 the Company issued a promissory note to a board member in exchange for $150,000 bearing an interest rate of 20% per annum and payable on September 10, 2024.

On September 11, 2023 the Company issued a promissory note to an advisor to the board in exchange for $50,000 bearing an interest rate of 20% per annum and payable on September 10, 2024.

On November 2, 2023 the Company issued a promissory note to a board member in exchange for $100,000 bearing an interest rate of 20% per annum and payable on November 1, 2024.

On December 12, 2023 the Company issued a promissory note to a board member in exchange for $75,000 bearing an interest rate of 20% per annum and payable on December 11, 2024.

Currently, our Audit Committee reviews and approves audit and permissible non-audit services performed by its independent registered public accounting firm of Hudgens CPA, PLLC , as well as the fees charged for such services. In its review of non-audit service and its appointment of Hudgens CPA, PLLC, our independent registered public accounting firm for the year end 2023, the Audit Committee considered whether the provision of such services is compatible with maintaining independence. All of the services provided and fees charged by Hudgens CPA, PLLC were approved by our Audit Committee.

For the year end 2022 but only through third quarter of 2022 Cherry Bekaert, LLP served as our auditor of record. On November 16, 2022 the Company and Cherry Bekaert, LLP ended their agreement for services rendered.

The following table shows the fees for the years ended December 31, 2023 and 2022:

PART IV

Item 15. Exhibits, Financial Statement Schedules

Exhibits

_____________________

* Certain portions of this exhibit have been redacted in accordance with Item 601(b)(10)(iv) of Regulation S-K because they are private, confidential and not material.

+ Indicates a management contract or a compensatory plan, contract or arrangement.

Not applicable.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Date: April 15, 2024

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.