NEPHROS INC [NEPH] Filings

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

FORM 10-K

For the fiscal year ended December 31, 2023

For the transition period from       to

Commission File Number 001-32288

NEPHROS, INC.

(Exact name of registrant specified in its charter)

380 Lackawanna Place

South Orange, NJ 07079

(Address of Principal Executive Offices)

(201) 343-5202

(Telephone Number, Including Area Code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Exchange Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.:

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

The aggregate market value of the voting stock held by non-affiliates of the registrant, as of June 30, 2023, was $10,420,918. Such aggregate market value was computed by reference to the closing price of the common stock as reported on the Nasdaq Stock Market on June 30, 2023. For purposes of making this calculation only, the registrant has defined affiliates as including only directors and executive officers and stockholders holding greater than 10% of the voting stock of the registrant as of June 30, 2023.

As of March 6, 2024, there were 10,543,675 shares of the registrant’s common stock, $0.001 par value, outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Certain portions of the registrant’s proxy statement to be filed with the Securities and Exchange Commission in connection with the 2024 Annual Meeting of Stockholders (the “2024 Proxy Statement”) are incorporated by reference into Part III of this Annual Report on Form 10-K. The 2024 Proxy Statement will be filed within 120 days of December 31, 2023.

NEPHROS, INC. AND SUBSIDIARIES

TABLE OF CONTENTS

FORWARD LOOKING STATEMENTS

The Private Securities Litigation Reform Act of 1995 provides a “safe harbor” for forward-looking statements. Certain statements in this Annual Report on Form 10-K constitute “forward-looking statements.” Such statements include statements regarding our ability to increase our revenue, limit our expenses and other expected operating results, including our ability and the timing of our business generating positive cash flows from operations, the adequacy of our existing capital resources to fund our operations, our belief that we will maintain good relationships with our suppliers, distributors and customers, and other statements that are not historical facts, including statements that may be preceded by the words “intends,” “may,” “will,” “plans,” “expects,” “anticipates,” “projects,” “predicts,” “estimates,” “aims,” “believes,” “hopes,” “potential” or similar words. Forward-looking statements are not guarantees of future performance, are based on certain assumptions and are subject to various known and unknown risks and uncertainties, many of which are beyond our control. Actual results may differ materially from the expectations contained in the forward-looking statements. Factors that may cause such differences include, but are not limited to, the risks that:

More detailed information about us and the risk factors that may affect the realization of forward-looking statements, including the forward-looking statements in this Annual Report on Form 10-K, is set forth in our filings with the U.S. Securities and Exchange Commission (the “SEC”), including our other periodic reports filed with the SEC. We urge investors and security holders to read those documents free of charge at the SEC’s web site at www.sec.gov. We do not undertake to publicly update or revise our forward-looking statements because of new information, future events or otherwise, except as required by law.

PART I

Item 1. Business

Overview

We are a commercial-stage company that develops and sells high performance water solutions to the medical and commercial markets.

In medical markets, we sell water filtration products. Our medical water filters, mostly classified as ultrafilters, are used primarily by hospitals for the prevention of infection from waterborne pathogens, such as legionella and pseudomonas, and in dialysis centers for the removal of biological contaminants from water and bicarbonate concentrate. Because our ultrafilters capture contaminants as small as 0.005 microns in size, they minimize exposure to a wide variety of bacteria, viruses, fungi, parasites, and endotoxins.

In commercial markets, we manufacture and sell water filters that improve the taste and odor of water and reduce biofilm, bacteria, and scale build-up in downstream equipment. Our products are marketed primarily to the food service, hospitality, convenience store, and health care markets. These commercial products are also marketed into medical markets, as supplemental filtration to our medical filters.

We were founded in 1997 by healthcare professionals affiliated with Columbia University Medical Center/New York-Presbyterian Hospital to develop and commercialize an alternative method to hemodialysis. We have extended our filtration technologies to meet the demand for liquid purification in other areas, in particular, water purification.

Our Products

Water Filtration Products

We develop and sell water filtration products used in both medical and commercial applications. Our water filtration products employ multiple filtration technologies, as described below.

In medical markets, our primary filtration mechanism is to pass liquids through the pores of polysulfone hollow fiber. Our filters’ pores are significantly smaller than those of competing products, resulting in highly effective elimination of waterborne pathogens, including legionella bacteria (the cause of Legionnaires disease) and viruses, which are not eliminated by most other microbiological filters on the market. Additionally, the fiber structure and pore density in our hollow fiber enables significantly higher flow rates than in other polysulfone hollow fiber.

Our primary sales strategy in medical markets is to sell through value-added resellers (“VARs”). Leveraging VARs has enabled us to rapidly expand our access to target customers with limited sales staff expansion. In addition, while we are currently focused on medical markets, the VARs that support these customers also support a wide variety of commercial and industrial customers. We believe that our VAR relationships have and will continue to facilitate growth in filter sales outside of the medical industry.

In commercial markets, we develop and sell our filters, for which carbon-based absorption is the primary filtration mechanism. These products allow us to improve water’s odor and taste, to reduce scale and heavy metals, and to reduce other water contaminants for customers who are primarily in the food service, convenience store, and hospitality industries. These commercial products are also sold into medical markets, as supplemental filtration to our medical filters.

In commercial markets, our model combines both direct and indirect sales. Through our employee sales staff, we have sold products directly to a number of convenience stores, hotels, casinos, and restaurants. We have also signed an agreement with a partner to be the exclusive distributor to resell select water filters and related products to customers in the commercial food and beverage markets subject to meeting certain minimum thresholds.

Target Markets

Our ultrafiltration products currently target the following markets:

Hospitals and Other Healthcare Facilities. Nephros filters are a leading tool used to provide proactive protection to patients in high-risk areas (e.g., ice machines, surgical rooms, NICUs) and reactive protection to patients in broader areas during periods of water pathogen outbreaks. Our products are used in hundreds of medical facilities to aid in infection control, both proactively and reactively.

As of 2023, according to the American Hospital Association, there are approximately 6,129 hospitals in the U.S., with approximately 920,000 beds. Over 34 million patients were admitted to these hospitals. The U.S. Department of Health and Human Services estimates that healthcare associated infections (“HAI”) occur in approximately 1 out of every 31 hospital patients, which calculates to over one million patients in 2023. HAIs affect patients in hospitals or other healthcare facilities and are not present or incubating at the time of admission. They also include infections acquired by patients in the hospital or facility, but appearing after discharge, and occupational infections among staff. Many HAIs are caused by waterborne bacteria and viruses that can thrive in aging or complex plumbing systems often found in healthcare facilities.

In January 2022, the Center for Clinical Standards and Quality at the Centers for Medicare and Medicaid Services (“CMS”) expanded its requirements – originally implemented in 2017 – for facilities to develop policies and procedures that inhibit the growth and spread of legionella and other opportunistic pathogens in building water systems. In this 2022 update, CMS requires teams to be assigned to the development of formal water management plans (“WMPs”), as well as detailed documentation regarding the development of the WMPs and their execution. CMS surveyors regularly review policies, procedures, and reports documenting water management implementation results to verify that facilities are compliant with these requirements. We believe that these CMS regulations may have a positive impact on the sale of our HAI-inhibiting ultrafilters.

We currently have FDA 510(k) clearance on the following portfolio of medical device products for use in the hospital setting to aid in infection control:

Our complete hospital infection control product line, including in-line, and point-of-use can be viewed on our website at https://www.nephros.com/infection-control/. We are not including the information on our website as a part of, nor incorporating it by reference into, this Annual Report on Form 10-K.

Dialysis Centers - Water/Bicarbonate. In the dialysis water market, Nephros ultrafiltration products are among the highest performing products on the market. The DSU-D, SSU-D and the SSUmini have become the standard endotoxin filter in many portable reverse osmosis systems. The EndoPur^®, our large-format ultrafilter targeted at dialysis clinic water systems, provides the smallest pore size available.

To perform hemodialysis, all dialysis clinics have dedicated water purification systems to produce water and bicarbonate concentrate, two essential ingredients for making dialysate, the liquid that removes waste material from the blood. According to the National Institute of Health, there are approximately 7,100 dialysis clinics in the United States servicing approximately 500,000 patients annually. We estimate that there are over 100,000 hemodialysis machines in operation in the United States.

We currently have FDA 510(k) clearance on the following portfolio of medical device products for use in the dialysis setting to aid in bacteria, virus, and endotoxin retention:

Commercial and Industrial Facilities. Our commercial NanoGuard^® product line accomplishes ultrafiltration via small pore size (0.005 micron) technology, filtering bacteria and viruses from water. In addition, our commercial filtration offerings include technologies that are primarily focused on improving odor and taste and on reducing scale and heavy metals from filtered water.

Our commercial market focus is on the hotel, restaurant, and convenience store markets. In March 2022, we entered into an agreement to provide water filtration systems to an organization that services approximately 3,000 Quick Service Restaurants (“QSR”). Effective January 1, 2023, we entered into a new supply agreement with this commercial partner, which superseded the March 2022 agreement. Under the January 2023 agreement, we engaged this commercial partner to be our exclusive distributor to the food, beverage and hospitality industries. We continue to pursue other national accounts, which, over time, may result in step-change increases in commercial market revenue.

Over time, we believe that the same water safety management programs currently underway at medical facilities may migrate to commercial markets. As the epidemiology of waterborne pathogens expands, links to contamination sources will become more efficient and the data more readily available. In cases where those sources are linked to restaurants, hotels, office buildings and residential complexes, the corporate owners of those facilities will likely face increasing liability exposure. We expect that building owners will come to understand ASHRAE-188, which outlines risk factors for buildings and their occupants, and provides water safety management guidelines. We believe, in time, most commercial buildings will need to follow the basic requirements of ASHRAE-188: create a water management plan, perform routine testing, and establish a plan to treat the building in the event of a positive test.

As demand for water testing and microbiological filtration grows, we will be ready to deploy our expertise and solutions based on years of experience servicing the medical market. We believe that we have an opportunity to offer unique expertise and products to the commercial market, and that our future revenue from the commercial market could even surpass our infection control revenue.

We currently market the following portfolio of proprietary products for use in the commercial, industrial, and food service settings:

Nephros commercial products combine effectively with NanoGuard ultrafiltration technologies to offer full-featured solutions to the commercial water market, including to existing users of Everpure filter manifolds.

Hemodiafiltration (HDF) Systems and Specialty Renal Products, Inc.

The current standard of care in the United States for patients with chronic renal failure is hemodialysis (“HD”), a process in which toxins are cleared via diffusion. Patients typically receive HD treatments at least 3 times weekly for 3-4 hours per treatment. HD is most effective in removing smaller, easily diffusible toxins. For patients with acute renal failure, the current standard of care in the United States is hemofiltration (“HF”), a process where toxins are cleared via convection. HF offers a much better removal of larger sized toxins when compared to HD; however, HF treatment is more challenging for patients, as it is performed daily, and typically takes 12-24 hours per treatment.

Our company was originally founded to develop and commercialize a hemodiafiltration (“HDF”) medical device. HDF is an alternative dialysis modality that combines the benefits of HD and HF into a single therapy by clearing toxins using both diffusion and convection. Though not widely used in the United States, HDF is prevalent in Europe and is performed for a growing number of patients. Clinical experience and literature demonstrate that HDF’s benefits, among other factors, include enhanced clearance of middle and large molecular weight toxins, improved patient survival, reduced incidence of dialysis-related amyloidosis, improved patient quality of life and reduced hospitalizations and overall length of stays.

Our original HDF device (“HDF1”) was cleared by the U.S. Food and Drug Administration (“FDA”) for the treatment of patients with chronic renal failure in 2012, but did not gain market acceptance due to, among other reasons, the feeling that it was too difficult to use.

We previously held a majority stake in Specialty Renal Products, Inc. (“SRP”), a development-stage medical device company that was focused primarily on the development of the second-generation HDF device (“HDF2”). SRP undertook efforts to redesign and dramatically simplify our HDF device. We believe those updates made the system significantly easier to use. On May 13, 2022, the FDA gave 510(k) clearance to SRP’s second-generation model of the OLpūrH2H Hemodiafiltration System, which enables nephrologists to provide HDF treatment to patients with end stage renal disease. In January 2023, SRP management began exploring strategic partnerships to support a commercial launch of the HDF product but was unsuccessful in identifying a partner. By late February 2023, SRP had nearly exhausted its capital resources and, due to its limited capital and lack of prospects for securing a strategic partnership or additional financing, the board of directors of SRP adopted a plan on March 6, 2023 to wind down SRP operations, liquidate its remaining assets and dissolve the company. That plan was approved by SRP’s stockholders on March 9, 2023, and on April 13, 2023, SRP filed a certificate of dissolution with the State of Delaware. SRP’s cash resources were sufficient to satisfy all of its outstanding liabilities other than its obligations to us under a loan with an outstanding balance of approximately $1.5 million. Accordingly, SRP assigned to us all of its remaining assets, including its intellectual property rights in the HDF2 device, in satisfaction of its outstanding loan balance. Although we have no current plans to do so, we may re-evaluate opportunities for HDF in the future.

Corporate Information

We were incorporated under the laws of the State of Delaware in April 1997. Our principal executive offices are located at 380 Lackawanna Place, South Orange, New Jersey 07079, and our telephone number is (201) 343-5202. We also have an office in Whippany, New Jersey. For more information about Nephros, please visit our website at www.nephros.com. We are not including the information on our website as a part of, nor incorporating it by reference into, this Annual Report on Form 10-K.

Manufacturing and Suppliers

We do not, and do not intend to in the near future, manufacture any of our medical device filtration products. We do manufacture some of our commercial filtration products in our facility in South Orange, New Jersey.

On April 23, 2012, we entered into a License and Supply Agreement (the “License and Supply Agreement”) with Medica S.p.A. (“Medica”), an Italy-based medical product manufacturing company, for the marketing and sale of certain filtration products based upon Medica’s proprietary Medisulfone ultrafiltration technology in conjunction with our filtration products, and for an exclusive supply arrangement for the filtration products. Under the License and Supply Agreement, as amended, Medica granted us an exclusive license, with right of sublicense, to market, promote, distribute, offer for sale and sell the filtration products worldwide, with certain limitations on territory, during the term of the License and Supply Agreement. In addition, we granted to Medica an exclusive license under our intellectual property to make the filtration products during the term of the License and Supply Agreement. The filtration covered under the License and Supply Agreement include both certain products based on Medica’s proprietary Versatile microfiber technology and certain filtration products based on Medica’s proprietary Medisulfone ultrafiltration technology. The term of the License and Supply Agreement with Medica expires on December 31, 2028, unless earlier terminated by either party in accordance with the terms of the License and Supply Agreement. We currently have an understanding with Medica whereby we have agreed to pay interest per month at the EURIBOR 360-day rate plus 500 basis points calculated on the principal amount of any outstanding invoices that are overdue by more than 15 days beyond the original payment terms.

In exchange for the rights granted, we agreed to make minimum annual aggregate purchases from Medica throughout the term of the License and Supply Agreement.

Sales and Marketing

Our New Jersey headquarters oversees global sales and marketing activity of our ultrafilter products. We work with multiple distributors for our ultrafilter products in the hospital and dialysis water markets. For the food service and hospitality markets, we have contracted with Donastar LLC as our master distributor. For other prospective markets for our ultrafilter products, we are pursuing alliance opportunities for joint product development and/or distribution. Our ultrafilter manufacturer in Europe shares certain intellectual property rights with us for one of our dual stage ultrafilter designs.

Research and Development

Our research and development efforts continue on several fronts directly related to our current product lines. For the ultrafiltration systems business, we are continually working with existing and potential distributors of ultrafilter products to develop solutions to meet customer needs.

Major Customers

For the years ended December 31, 2023 and 2022, the following customers accounted for the following percentages of our revenues, respectively:

As of December 31, 2023 and 2022, the following customers accounted for the following percentages of our accounts receivable, respectively:

Competition

With respect to the water filtration market, we compete with companies that are well-entrenched in the water filtration domain. These companies include Pall Corporation (wholly owned by Danaher Corporation), which manufactures point-of-use microfiltration products, as well as 3M and Pentair, who manufacture the Cuno® and Everpure® brands of water filtration and purification products, respectively. Our methods of competition in the water filtration domain include:

Intellectual Property

Patents

We protect our technology and products through patents and patent applications. In addition to the United States, we also apply for patents in other jurisdictions, such as the European Patent Office, Canada, and Japan, to the extent we deem appropriate. We have built a portfolio of patents and applications covering our products, including their hardware design and methods of hemodiafiltration.

We believe that our patent strategy will provide a competitive advantage in our target markets, but our patents may not be broad enough to cover our competitors’ products and may be subject to invalidation claims. Our U.S. patent for the “Method and Apparatus for a Hemodiafiltration Module for use with a Dialysis Machine,” has claims that cover the OLpūr MDHDF filter series and the method of hemodiafiltration employed in the operation of the products. Technological developments in ESRD therapy could reduce the value of our intellectual property. Any such reduction could be rapid and unanticipated. We have issued patents on our water filtration products and applications in process to cover various applications in residential, commercial, and remote environments.

As of December 31, 2023, we had four U.S. patents and one Canadian patent. In addition, we have one pending patent application in the United States. Our pending US patent application relates to filter technologies, including liquid purification filter systems that are particularly suited for use in harsh environments.

Trademarks

As of December 31, 2023, in the United States, we secured registrations of the trademarks ENDOPUR, HYDRAGUARD, NANOGUARD, and NEPHROS. In the US, we filed two trademark applications for BECAUSE WATER MATTERS. In the UK, we secured registrations for the trademarks NANOGUARD, NEPHROS HYDRAGUARD, and PATHOGUARD.

Governmental Regulation

The research and development, manufacturing, promotion, marketing, and distribution of our ESRD therapy products in the United States, Europe and other regions of the world are subject to regulation by numerous governmental authorities, including the FDA, the European Union and analogous agencies.

United States

The FDA regulates the manufacture and distribution of medical devices in the United States pursuant to the Food, Drug, and Cosmetics (FDC) Act. All of our ESRD therapy products are regulated in the United States as medical devices by the FDA under the FDC Act. Under the FDC Act, medical devices are classified into one of three classes, namely Class I, II or III, on the basis of the controls deemed necessary by the FDA to reasonably ensure their safety and effectiveness.

Before a new medical device can be introduced to the market, Section 510(k), and Section 515 of the FDC Act require a manufacturer who intends to market a medical device to submit a premarket notification (Section 510(k)) or a request for premarket approval (Section 515), to the FDA.

A 510(k) clearance will be granted if the submitted information establishes that the proposed device is “substantially equivalent” to a legally marketed Class I or Class II medical device or to a Class III medical device for which the FDA has not called for premarket approval under Section 515. The 510(k) clearance process is generally faster and simpler than the premarket approval process.

Premarket approval (PMA) is the FDA’s process of scientific and regulatory review to evaluate the safety and effectiveness of Class III medical devices. Class III devices are those that support or sustain human life, are of substantial importance in preventing impairment of human health, or which present a potential, unreasonable risk of illness or injury, or are new and present unknown safety or effectiveness issues or risks. PMA is the most stringent type of device marketing application required by the FDA. To gain approval, the manufacturer must present adequate scientific evidence to assure that the device is safe and effective for its intended use(s).

For any devices cleared through the 510(k) clearance process, modifications or enhancements that could significantly affect the safety or effectiveness of the device or that constitute a major change to the intended use of the device will require a new 510(k) clearance submission. Accordingly, if we do obtain Section 510(k) clearance for any of our ESRD therapy and/or filtration products, we will need to submit another Section 510(k) notification if we significantly affect that product’s safety or effectiveness through subsequent modifications or enhancements.

All of our products have been cleared by the FDA as Class II devices, such as.

The FDC Act requires that medical devices be manufactured in accordance with the FDA’s current QSR regulations which require, among other things, that:

In addition to the requirements described above, the FDC Act requires that:

We and our contract manufacturers are required to manufacture our products in compliance with current Good Manufacturing Practice (GMP) requirements set forth in the QSR. The QSR requires a quality system for the design, manufacture, packaging, labeling, storage, installation, and servicing of marketed devices, and it includes extensive requirements with respect to quality management and organization, device design, buildings, equipment, purchase and handling of components or services, production and process controls, packaging and labeling controls, device evaluation, distribution, installation, complaint handling, servicing, and record keeping. The FDA evaluates compliance with the QSR through periodic unannounced inspections that may include the manufacturing facilities of our subcontractors. If the FDA believes that we or any of our contract manufacturers, or regulated suppliers, are not in compliance with these requirements, there may be a material adverse effect on our manufacturing operations, effecting our ability to sell.

European Union

The European Union began to harmonize national regulations comprehensively for the control of medical devices in member nations in 1993, when it adopted its Medical Devices Directive 93/42/EEC. The European Union directive applies to both the manufacturer’s quality assurance system and the product’s technical design and discusses the various ways to obtain approval of a device (dependent on device classification), how to properly CE mark a device, and how to place a device on the market.

In 2017, the European Union (EU) adopted the EU Medical Device Regulation (Council Regulations 2017/745) which imposes stricter requirements for the marketing and sale of medical devices, including new quality system and post-market surveillance requirements.

As defined in EU Medical Device Regulation (Council Regulations 2017/745), the regulatory approach necessary to demonstrate to the European Union that the organization has the ability to provide medical devices and related services that consistently meet customer requirements and regulatory requirements applicable to medical devices requires the certification of a full quality management system by a notified body.

European Union requirements for products are set forth in harmonized European Union standards and include conformity to safety requirements, physical and biological properties, construction and environmental properties, and information supplied by the manufacturer. A company demonstrates conformity to these requirements, with respect to a product, by pre-clinical tests, biocompatibility tests, qualification of products and packaging, risk analysis and well-conducted clinical investigations approved by ethics committees.

Once a manufacturer’s full quality management system is determined to be in compliance with ISO 13485/2016 and other statutory requirements, and the manufacturer’s products conform to harmonized European standards, the notified body will recommend and document such conformity. The manufacturer will receive a CE marking and ISO certifications, and then may place a CE mark on the relevant products. The CE mark, which stands for Conformité Européene, demonstrates compliance with the relevant European Union requirements. Products subject to these provisions that do not bear the CE mark cannot be imported to, or sold or distributed within, the European Union.

Medical Devices sold in Europe/ anticipated to be sold in Europe, shall be examined, and classified as:

Currently we are in the process to seek approval for CE certification under EU Medical Device Regulation (Council Regulations 2017/745). Once approved, the following products will have certification from BSI America for CE marking and adherence to ISO13485 standards as Class IIa (Rule 3) medical devices:

Regulatory Authorities in Regions Outside of the United States and the European Union

In November 2007 and May 2011, the Therapeutic Products Directorate of Health Canada, the Canadian health regulatory agency, approved our OLpūr MD220 Hemodiafilter and our DSU, respectively, for marketing in Canada. Other than the Canadian approval of our OLpūr MD220 Hemodiafilter and DSU products, we have not obtained any regulatory approvals to sell any of our products outside of the United States and the European Union and there is no assurance that any such clearance or certification will be issued.

Requirements pertaining to medical devices vary widely from country to country, ranging from no health regulations to detailed submissions such as those required by the FDA. Our manufacturing facilities are subject to audits and have been certified to be ISO 13485:2016, which allows us to sell our products in the United States and Canada.

In November 2020, we received MDSAP certification to continue sales and compliance in the United States and Health Canada. The Medical Device Single Audit Program (MDSAP) is a program that allows the conduct of a single regulatory audit of a medical device manufacturer’s quality management system that satisfies the requirements of multiple regulatory jurisdictions. Audits are conducted by Auditing Organizations authorized by the participating Regulatory Authorities to audit under MDSAP requirements. The MDSAP is a way that medical device manufacturers can be audited once for compliance with the standard and regulatory requirements of up to five different medical device markets: Australia, Brazil, Canada, Japan, and the United States.

In November 2023, we received approval for expansion of our MDSAP certification to include Brazil. This expansion provides Nephros the approval to sell the following medical devices in Brazil:

Product Liability and Insurance

The production, marketing and sale of our products have an inherent risk of liability in the event of product failure or claim of harm caused by product operation. We have acquired product liability insurance for our products in the amount of $3 million. A successful claim in excess of our insurance coverage could materially deplete our assets. Moreover, any claim against us could generate negative publicity, which could decrease the demand for our products, our ability to generate revenues and our profitability.

Some of our existing and potential agreements with manufacturers of our products and components of our products do or may require us (1) to obtain product liability insurance or (2) to indemnify manufacturers against liabilities resulting from the sale of our products. If we are not able to maintain adequate product liability insurance, we will be in breach of these agreements, which could materially adversely affect our ability to produce our products. Even if we are able to obtain and maintain product liability insurance, if a successful claim in excess of our insurance coverage is made, then we may have to indemnify some or all of our manufacturers for their losses, which could materially deplete our assets.

Employees

As of December 31, 2023, we employed a total of 31 full-time employees, including 11 employed in sales/marketing/customer support, 15 in logistics, general, and administrative, and 4 in research and development and 1 in manufacturing. None of our employees are currently represented by a labor union or covered by a collective bargaining agreement and we believe that our relations with our employees are good. During 2023, we had limited voluntary turnover. Going forward, we intend to focus on maintaining our current good relations with our employees and continuing to develop and explore ways to collaborate with our employees and create a well-regarded workplace.

Available Information

We are subject to the reporting requirements of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). The Exchange Act requires us to file periodic reports, proxy statements and other information with the SEC. The SEC maintains a website that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC. These materials may be obtained electronically by accessing the SEC’s website at http://www.sec.gov.

Item 1A. Risk Factors

Risks Related to Our Overall Business and Operations

We have a history of operating losses and a significant accumulated deficit, and we may not achieve or maintain profitability in the future.

As of December 31, 2023, we had an accumulated deficit of $144.4 million as a result of historical operating losses. While we believe that revenues will increase following our planned sales team expansion, there can be no guarantee of this. We may continue to incur additional losses in the future depending on the timing and marketplace acceptance of our products and as a result of operating expenses being higher than our gross margin from product sales. We began sales of our first product in March 2004, and we may never realize sufficient revenues from the sale of our products or be profitable. Each of the following factors, among others, may influence the timing and extent of our profitability, if any:

If we are unable to achieve profitability, we will need additional capital to fund our operating activities. Such capital is likely to be from the sale of shares of our common stock or other equity securities or from loans or other debt securities. However, there is no assurance that such capital will be available on favorable terms or at all.

We may be unable to achieve or sustain revenue growth.

Our business and future prospects are substantially dependent upon our ability to significantly grow our product revenue. Although our sales were approximately 43% higher in 2023 compared to 2022, there is no assurance that we will be able to continue our sales growth in future periods. Our ability to increase our revenues in future periods will depend on our ability to significantly grow our customer base and then consistently obtaining product reorders from those customers. If we cannot sustain significant revenue growth for an extended period, our financial results will be adversely affected, and our stock price may decline.

We face significant challenges in obtaining market acceptance of our products, which could adversely affect our potential sales and revenues.

Our success depends on our ability to both maintain our existing customers and to continue growing our customer base. If we are unable to maintain and further grow our customer base, our ability to grow revenue will be limited and we will have difficulty achieving profitability. Our ability to grow our customer base also depends on our ability to continue increasing achieve market acceptance of our water filter products, including among healthcare facility customers, or may not be deemed suitable for other commercial, military, industrial or retail applications. Factors that may affect our ability to achieve acceptance of our water filtration products and technologies in the marketplace include whether such products will be safe for use, whether they will be effective and whether they will be cost-effective.

If we are not able to successfully scale-up production of our products, then our sales and revenues will suffer.

In order to successfully commercialize our products, we need to be able to produce them in a cost-effective way on a large scale to meet commercial demand, while maintaining extremely high standards for quality and reliability. The extent to which we fail to successfully commercialize our products will limit our ability to be profitable.

We rely on, and for the foreseeable future expect to continue to rely on, a limited number of independent manufacturers to produce our products. Our manufacturers’ systems and procedures may not be adequate to support our operations and may not be able to achieve the rapid execution necessary to exploit the market for our products. If we are successful in continuing to increase our product revenue, we will need to also increase our supply requirements. However, our contracted manufacturers could experience manufacturing and control problems in connection with their manufacture of our products, which could disrupt their ability to timely and adequately supply us with product. If we experience any of these problems with respect to our manufacturers’ scale-ups of manufacturing operations, then we may not be able to have our products manufactured and delivered in a timely manner. Our products are new and evolving, and our manufacturers may encounter unforeseen difficulties in manufacturing them in commercial quantities or at all.

If we cannot develop adequate distribution, customer service and technical support networks, then we may not be able to market and distribute our products effectively and/or customers may decide not to order our products. In either case, our sales and revenues will suffer.

Our strategy requires us to distribute our products and provide a significant amount of customer service and maintenance and other technical service. To provide these services, we have begun, and will need to continue, to develop a network of distribution and a staff of employees and independent contractors in each of the areas in which we intend to operate. In particular, our ability to grow sales in our commercial business depends largely on the efforts of a distribution partner with respect to which we have given exclusive distribution rights to our products in the food, beverage and hospitality markets. We cannot assure that we will be able to organize and manage this network on a cost-effective basis. If we cannot effectively organize and manage this network, then it may be difficult for us to distribute our products and to provide competitive service and support to our customers, in which case customers may be unable, or decide not, to order our products and our sales and revenues will suffer.

We have limited experience selling our products to healthcare facilities, and we might be unsuccessful in increasing our sales.

Our business strategy depends in part on our ability to sell our products to hospitals and other healthcare facilities, including dialysis clinics. We have limited experience with respect to sales and marketing. If we are unsuccessful at manufacturing, marketing, and selling our products, our operations and potential revenues will be materially adversely affected.

We are dependent on third parties to supply us with our products to us, making us vulnerable to supply problems and price fluctuations.

We rely on third-party suppliers to provide us with certain components of our products. With respect to our proprietary filter material used in our DSU-H, SSU-H, S100 and HydraGuard^TM and HydraGuard^TM – Flush filters, we rely on a single source supplier. Our agreement with that supplier will expire in 2028 and although our relationship with this supplier is good, there can be no assurance that our current agreement will guarantee uninterrupted supply or that we will be able to renew the agreement on favorable terms, or at all. We depend on our suppliers to provide us and our customers with materials in a timely manner that meet our and their quality, quantity and cost requirements. These suppliers may encounter problems during manufacturing for a variety of reasons, any of which could delay or impede their ability to meet our demand and our customers’ demands.

Companies in the United States and around the world have experienced a disruption in the supply of certain components and raw materials, such as resins and polymers, which may adversely affect us and our ability to obtain these components in a timely manner, in the volumes we require, or at all. In addition, the prices of these components and other supplies we rely upon in the manufacture of our products may rise. For example, we and our suppliers have recently experienced, and may continue to experience, rising costs due to inflation, such as costs of materials, labor and freight. If inflation continues to rise, the prices of our components may rise, resulting in increased expenses to us that we may not be able to offset by raising the prices of our products.

Any supply interruption from our suppliers or failure to obtain additional suppliers for any of the components used in our products, or price increases of these supplies, could have a material adverse effect on our business, financial condition and results of operations.

We operate with a limited senior management team and are highly dependent on our sales and marketing personnel. Our business could be harmed if we are unable to attract and retain personnel necessary for our success.

We operate our business with a two-person senior management team. We have a Chief Executive Officer and a Chief Financial Officer, who together directly oversee operations, sales and finances. Our dependence on two officers to perform multiple functions exposes us to various risks, including the risk that two officers may be unable to devote sufficient or timely attention to all aspects of operating our business and that in the event of a sudden departure of one officer, we may not be able to promptly identify a successor. We do not carry key person life insurance on any of our employees. If we are unable to recruit and retain qualified personnel to our senior management teams, we will be unlikely to achieve our objectives of continuing to grow our company and our business may otherwise be harmed.

In addition, our need to significantly increase our revenue is also dependent on the personnel in our sales and marketing organization. Although we have recently added a number of new sales and marketing professionals, our success will depend on their ability to quickly integrate into our business and our ability to develop and retain them as employees. Our ability to increase our sales revenue may be materially impaired if we experience attrition in our sales and marketing organization.

We rely on information technology systems and network infrastructure to operate and manage our business. If we experience a breach, cyber attack or other disruption to these systems or data, our business, results of operations and financial condition could be adversely affected.

We are increasingly dependent on sophisticated information technology systems to operate our business, including to process, transmit and store sensitive data. Specifically, we rely on our information technology systems to effectively manage sales and marketing, accounting and financial functions, inventory management, and our research and development data. Our business therefore depends on the continuous, effective, reliable, and secure operation of our computer hardware, software, networks, Internet servers, and related infrastructure.

Although we believe our computer and communications hardware is protected by reasonable physical, technical, and administrative safeguards, it is still vulnerable to system malfunction, computer viruses, and cybersecurity breaches – including ransomware, phishing, malware, brute force, insider threats, and other cyber attacks and security incidents. These events could lead to the unauthorized access to information systems maintained by us or our service providers or customers and result in the misappropriation or unauthorized disclosure of confidential information belonging to us, our employees, customers, distributors or our suppliers. The techniques used by criminal elements to attack computer systems are sophisticated, change frequently and may originate from less regulated and remote areas of the world, including countries that engage in state-sponsored cyber attacks. As a result, we may not be able to address these techniques proactively or implement adequate preventative measures. Additionally, the regulatory environment governing information, security and privacy laws is increasingly demanding and continues to evolve. If our information technology systems are compromised, we could be subject to fines, damages, litigation and enforcement actions and we could lose trade secrets or other confidential information, the occurrence of which could harm our reputation, business, results of operations and financial condition.

Our information systems, and those of third parties with whom we contract, also require an ongoing commitment of significant resources to maintain, protect and enhance existing systems and develop new systems to keep pace with continuing changes in information technology. The failure of our information technology systems to perform as we anticipate or our failure to effectively implement new systems could disrupt our operations and could result in decreased sales, increased overhead costs, excess inventory and product shortages, all of which could have a material adverse effect on our reputation, business, results of operations and financial condition.

Product liability associated with the production, marketing, and sale of our products, and/or the expense of defending against claims of product liability, could materially deplete our assets and generate negative publicity which could impair our reputation.

The production, marketing and sale of water-filtration products, particularly to healthcare facility customers, have inherent risks of liability in the event of product failure or claim of harm caused by product operation. Voluntary recalls could subject us to claims or proceedings by consumers, the FDA or other regulatory authorities which may adversely impact our sales and revenues. Furthermore, even meritless claims of product liability may be costly to defend against. Although we have acquired product liability insurance for our products, we may not be able to maintain or obtain this insurance on acceptable terms or at all. Because we may not be able to obtain insurance that provides us with adequate protection against all potential product liability claims, a successful claim in excess of our insurance coverage could materially deplete our assets. Moreover, even if we are able to obtain adequate insurance, any claim against us could generate negative publicity, which could impair our reputation and adversely affect the demand for our products, our ability to generate sales and our profitability.

Some of the agreements that we may enter into with manufacturers of our products and components of our products may require us to obtain product liability insurance; or to indemnify manufacturers against liabilities resulting from the sale of our products. For example, the agreement with our contract manufacturer (“CM”) requires that we obtain and maintain certain minimum product liability insurance coverage and that we indemnify our CM against certain liabilities arising out of our products that they manufacture, provided they do not arise out of our CM’s breach of the agreement, negligence or willful misconduct. If we are not able to obtain and maintain adequate product liability insurance, then we could be in breach of these agreements, which could materially adversely affect our ability to produce our products and generate revenues. Even if we are able to obtain and maintain product liability insurance, if a successful claim in excess of our insurance coverage is made, then we may have to indemnify some or all of our manufacturers for their losses, which could materially deplete our assets.

We cannot assure you that our products will be safe or that there will not be product-related deaths, serious injuries or product malfunctions. Further, we are required under applicable law to report any circumstances relating to our medically approved products that could result in deaths or serious injuries. These circumstances could trigger recalls, class action lawsuits and other events that could cause us to incur expenses and may also limit our ability to generate revenues from such products.

We cannot assure you that our products will prove to be safe or that there will not be product-related deaths or serious injuries or product malfunctions, which could trigger recalls, class action lawsuits and other events that could cause us to incur significant expenses, limit our ability to market our products and generate revenues from such products or cause us reputational harm. Under the FDC Act, we are required to submit medical device reports (“MDRs”) to the FDA to report device-related deaths, serious injuries and malfunctions of medically approved products that could result in death or serious injury if they were to recur. Depending on their significance, MDRs could trigger events that could cause us to incur expenses and may also limit our ability to generate revenues from such products. Additionally, any of the following could occur:

If any of these events occur, then we could incur significant expenses and it could become more difficult for us to market and sell our products and to generate revenues from sales. Other countries may impose analogous reporting requirements that could cause us to incur expenses and may also limit our ability to generate revenues from sales of our products.

Risks Related to Government Regulation

If we violate any provisions of the FDC Act or any other statutes or regulations, then we could be subject to enforcement actions by the FDA or other governmental agencies.

We face a significant compliance burden under the FDC Act and other applicable statutes and regulations which govern the testing, labeling, storage, record keeping, distribution, sale, marketing, advertising and promotion of our medically approved products. If we violate the FDC Act or other regulatory requirements (either with respect to our ultrafilters or otherwise) at any time during or after the product development and/or approval process, we could be subject to enforcement actions by the FDA or other agencies, including:

Any of the above could have a material adverse effect on our business, financial condition, and results of operations.

If we develop new water filter products in the future, we may be required to obtain regulatory approvals and clearances in the countries in which we intend to sell such products. If we fail to receive, or experience a significant delay in receiving, such approvals and clearances, then we may not be able to get our new products to market and enhance our revenues.

Our current water filter products that we market and sell to healthcare facilities and dialysis centers have 510(k) clearance from the FDA. However, we will need to continue developing new products in the future to continue to compete in our industry, and such new products may require obtaining regulatory approvals in the U.S. and other jurisdictions in which we intend to market them.

We cannot ensure that any new products developed by us in the future, will be approved for marketing. The clearance and/or approval processes can be lengthy and uncertain, and each requires substantial commitments of our financial resources and our management’s time and effort. We may not be able to obtain further CE marking or regulatory approval for any of our existing or new products in a timely manner or at all. Even if we do obtain regulatory approval, approval may be only for limited uses with specific classes of patients, processes, or other devices. Our failure to obtain, or delays in obtaining, the necessary regulatory clearance and/or approvals would prevent us from selling our affected products in the applicable regions. If we cannot sell some of our products in such regions, or if we are delayed in selling while waiting for the necessary clearance and/or approvals, our ability to generate revenues from these products will be limited.

Over time, we intend to market our products globally. Requirements pertaining to the sale of our products vary widely from country to country. It may be very expensive and difficult for us to meet the requirements for the sale of our products in many countries. As a result, we may not be able to obtain the required approvals in a timely manner, if at all. If we cannot sell our products in a particular region, then the size of our potential market could be reduced, which would limit our potential sales and revenues.

Significant additional governmental regulation could subject us to unanticipated delays that would adversely affect our sales and revenues.

Our business strategy depends in part on our ability to get our products into the market as quickly as possible. Additional laws and regulations, or changes to existing laws and regulations that are applicable to our business may be enacted or promulgated, and the interpretation, application or enforcement of the existing laws and regulations may change. We cannot predict the nature of any future laws, regulations, interpretations, applications or enforcements or the specific effects any of these might have on our business. Any future laws, regulations, interpretations, applications, or enforcements could delay or prevent regulatory approval or clearance of our products and our ability to market our products. Moreover, changes that result in our failure to comply with the requirements of applicable laws and regulations could result in enforcement actions by the FDA and/or other agencies, all of which could impair our ability to have manufactured and to sell the affected products.

If we are not able to maintain sufficient quality controls, then the approval or clearance of our products by the European Union, the FDA or other relevant authorities could be withdrawn, delayed, or denied and our sales and revenues will suffer.

Approval or clearance of our products could be withdrawn, delayed, or denied by the European Union, the FDA and the relevant authorities of other countries if our manufacturing facilities do not comply with their respective manufacturing requirements. The European Union imposes requirements on quality control systems of manufacturers, which are inspected and certified on a periodic basis and may be subject to additional unannounced inspections. Failure by our manufacturers to comply with these requirements could prevent us from marketing our products in the European Community. The FDA also imposes requirements through quality system requirements regulations, which include requirements for good manufacturing practices. Failure by our manufacturers to comply with these requirements could prevent us from obtaining FDA pre-clearance or approval of our products and from marketing such products in the United States. Although the manufacturing facilities and processes that we use to manufacture our OLpūr MD HDF filter series have been inspected and certified by a worldwide testing and certification agency (also referred to as a notified body) that performs conformity assessments to European Union requirements for medical devices, they have not been inspected by the FDA. A “notified body” is a group accredited and monitored by governmental agencies that inspects manufacturing facilities and quality control systems at regular intervals and is authorized to carry out unannounced inspections. We cannot be sure that any of the facilities or processes we use will comply or continue to comply with their respective requirements on a timely basis or at all, which could delay or prevent our obtaining the approvals we need to market our products in the European Community and the United States.

To market our products in the European Community, the United States, and other countries, where approved, manufacturers of such products must continue to comply or ensure compliance with the relevant manufacturing requirements. Although we cannot control the manufacturers of our products, we may need to expend time, resources and effort in product manufacturing and quality control to assist with their continued compliance with these requirements. If violations of applicable requirements are noted during periodic inspections of the manufacturing facilities of our manufacturers, then we may not be able to continue to market the products manufactured in such facilities and our revenues may be materially adversely affected.

Risks Related to our Intellectual Property

Protecting our intellectual property in our technology through patents may be costly and ineffective. If we are not able to adequately secure or enforce protection of our intellectual property, then we may not be able to compete effectively and we may not be profitable.

Our future success depends in part on our ability to protect the intellectual property for our technology through patents. We will only be able to protect our products and methods from unauthorized use by third parties to the extent that our products and methods are covered by valid and enforceable patents or are effectively maintained as trade secrets. Our 4 granted U.S. patents will expire at various times from 2029 to 2039, assuming they are properly maintained.

The protection provided by our patents, and patent applications if issued, may not be broad enough to prevent competitors from introducing similar products into the market. Our patents, if challenged or if we attempt to enforce them, may not necessarily be upheld by the courts of any jurisdiction. Numerous publications may have been disclosed by, and numerous patents may have been issued to, our competitors and others relating to methods and devices for dialysis of which we are not aware and additional patents relating to methods and devices for dialysis may be issued to our competitors and others in the future. If any of those publications or patents conflict with our patent rights, or cover our products, then any or all of our patent applications could be rejected and any or all of our granted patents could be invalidated, either of which could materially adversely affect our competitive position.

Litigation and other proceedings relating to patent matters, whether initiated by us or a third party, can be expensive and time-consuming, regardless of whether the outcome is favorable to us, and may require the diversion of substantial financial, managerial, and other resources. An adverse outcome could subject us to significant liabilities to third parties or require us to cease any related development, product sales or commercialization activities. In addition, if patents that contain dominating or conflicting claims have been or are subsequently issued to others and the claims of these patents are ultimately determined to be valid, then we may be required to obtain licenses under patents of others in order to develop, manufacture, use, import and/or sell our products. We may not be able to obtain licenses under any of these patents on terms acceptable to us, if at all. If we do not obtain these licenses, we could encounter delays in, or be prevented entirely from using, importing, developing, manufacturing, offering, or selling any products or practicing any methods, or delivering any services requiring such licenses.

If we file for or obtain additional patents in foreign countries, we will be subject to laws and procedures that differ from those in the United States. Such differences could create additional uncertainty about the level and extent of our patent protection. Moreover, patent protection in foreign countries may be different from patent protection under U.S. laws and may not be as favorable to us. Many non-U.S. jurisdictions, for example, prohibit patent claims covering methods of medical treatment of humans, although this prohibition may not include devices used for such treatment.

If we are not able to secure and enforce protection of our trade secrets through enforcement of our confidentiality and non-competition agreements, then our competitors may gain access to our trade secrets, we may not be able to compete effectively, and we may not be profitable. Such protection may be costly and ineffective.

We attempt to protect our trade secrets, including the processes, concepts, ideas, and documentation associated with our technologies, through the use of confidentiality agreements and non-competition agreements with our current employees and with other parties to whom we have divulged such trade secrets. If these employees or other parties breach our confidentiality agreements and non-competition agreements, or if these agreements are not sufficient to protect our technology or are found to be unenforceable, then our competitors could acquire and use information that we consider to be our trade secrets and we may not be able to compete effectively. Policing unauthorized use of our trade secrets is difficult and expensive and, in the event we further expand our operations, the laws of other countries may not adequately protect our trade secrets.

Risks Related to Owning Our Common Stock

The prices at which shares of the common stock trade have been and will likely continue to be volatile.

During the two years ended December 31, 2023, our common stock has traded at prices ranging from a high of $6.19 to a low of $0.91 per share. Due to the lack of an active trading market for our common stock, we expect the prices at which our common stock might trade to continue to be highly volatile. The expected volatile price of our stock will make it difficult for investors to predict the value of an investment in our common stock, to sell shares at a profit at any given time, or to plan purchases and sales in advance. A variety of other factors might also affect the market price of our common stock. These include, but are not limited to:

We are not able to control many of these factors, and we believe that period-to-period comparisons of our financial results will not necessarily be indicative of our future performance.

Our common stock could be further diluted as a result of the issuance of additional shares of common stock, warrants or options.

In the past we have issued common stock and warrants in order to raise capital to help fund our business. We have also issued stock options and restricted stock as compensation for services and incentive compensation for our employees, directors, and consultants. We have shares of common stock reserved for issuance upon the exercise of certain of these securities and may increase the shares reserved for these purposes in the future. Our issuance of additional common stock, options and warrants could affect the rights of our stockholders, could reduce the market price of our common stock, or could obligate us to issue additional shares of common stock.

Market sales of large amounts of our common stock, or the potential for those sales even if they do not actually occur, may have the effect of depressing the market price of our common stock, the supply of common stock available for resale could be increased, which could stimulate trading activity and cause the market price of our common stock to drop, even if our business is doing well. Furthermore, the issuance of any additional shares of our common stock or securities convertible into our common stock could be substantially dilutive to holders of our common stock if they do not invest in future offerings.

We have never paid dividends and do not intend to pay cash dividends.

We have never paid dividends on our common stock and currently do not anticipate paying cash dividends on our common stock for the foreseeable future. Consequently, any returns on an investment in our common stock in the foreseeable future will have to come from an increase in the value of the stock itself. As noted above, the lack of an active trading market for our common stock will make it difficult to value and sell our common stock. While our dividend policy will be based on the operating results and capital needs of our business, we anticipate that all earnings, if any, will be retained to finance our future operations.

Several provisions of the Delaware General Corporation Law, our fourth amended and restated certificate of incorporation, as amended, and our second amended and restated bylaws could discourage, delay or prevent a merger or acquisition, which could adversely affect the market price of our common stock.

Several provisions of the Delaware General Corporation Law, our fourth amended and restated certificate of incorporation, as amended, and our second amended and restated bylaws could discourage, delay or prevent a merger or acquisition that stockholders may consider favorable, and the market price of our common stock could be reduced as a result. These provisions include:

As a smaller reporting company with little or no name recognition and with several risks and uncertainties that could impair our business operations, we are not likely to generate widespread interest in our common stock. Without widespread interest in our common stock, our common stock price may be highly volatile and an investment in our common stock could decline in value.

Unlike many companies with publicly traded securities, we have little or no name recognition in the investment community. We are a relatively new company and very few investors are familiar with either our company or our products. We do not have an active trading market in our common stock, and one might never develop, or if it does develop, might not continue.

Additionally, the market price of our common stock may fluctuate significantly in response to many factors, many of which are beyond our control. Risks and uncertainties, including those described elsewhere in this “Risk Factors” section could impair our business operations or otherwise cause our operating results or prospects to be below expectations of investors and market analysts, which could adversely affect the market price of our common stock. As a result, investors in our common stock may not be able to resell their shares at or above their purchase price and could lose all of their investment.

Securities class action litigation is often brought against public companies following periods of volatility in the market price of such company’s securities. We may become subject to this type of litigation in the future. Litigation of this type could be extremely expensive and divert management’s attention and resources from running our company.

Our directors, executive officers, and Wexford Capital LP (“Wexford”) control a significant portion of our stock and, if they choose to vote together, could have sufficient voting power to control the vote on substantially all corporate matters.

As of March 1, 2024, Wexford, our largest stockholder, beneficially owned approximately 35% of our outstanding common stock. Collectively, Wexford, our directors and our executive officers beneficially owned approximately 37.5% of our outstanding common stock. As a result of this ownership, Wexford has the ability to exert significant influence over our policies and affairs, including the election of directors. Wexford, whether acting alone or acting with other stockholders, could have the power to elect all of our directors and to control the vote on substantially all other corporate matters without the approval of other stockholders. Furthermore, such concentration of voting power could enable Wexford, whether acting alone or acting with other stockholders, to delay or prevent another party from taking control of our company even where such change of control transaction might be desirable to other stockholders. The interests of Wexford in any matter put before the stockholders may differ from those of any other stockholder.

Future sales of our common stock could cause the market price of our common stock to decline.

The market price of our common stock could decline due to sales of a large number of shares in the market, including sales of shares by Wexford or any other large stockholder, or the perception that such sales could occur. These sales could also make it more difficult or impossible for us to sell equity securities in the future at a time and price that we deem appropriate to raise funds through future offerings of common stock. Future sales of our common stock by stockholders could depress the market price of our common stock.

Item 1B. Unresolved Staff Comments

Not required.

Item 1C. Cybersecurity

Risk Management and Strategy

We have implemented cybersecurity processes, technologies, and controls to aid in our efforts to assess, identify, and manage cybersecurity risks. Our enterprise risk management framework considers cybersecurity risk alongside other company risks as part of our overall risk assessment process.

Our cybersecurity risk management program is integrated into our overall enterprise risk management program and shares common methodologies, reporting channels, and governance processes that apply across the enterprise risk management program to other legal, compliance, strategic, operational, and financial risk areas.

Our cybersecurity risk management program includes:

In addition to the processes, technologies, and controls that we have in place to reduce the likelihood of a material cybersecurity incident (or series of related cybersecurity incidents), our outsourced security team has a written incident response plan outlining how to address cybersecurity events that occur. We have assigned a team comprised of finance and technology personnel to review the plan annually to serve as a framework for the execution of responsibilities across businesses and operational roles. The incident response plan is designed to help us coordinate actions to prepare for, detect, respond to and recover from cybersecurity incidents, and includes processes to triage, assess severity, escalate, contain, investigate, and remediate the incident, as well as to assess the need for disclosure, comply with applicable legal obligations and mitigate the impact to our brand and reputation and on impacted parties.

In addition to the cybersecurity incident response plan, our outsourced team conducts tabletop exercises to enhance our incident response preparedness. They also have processes to oversee and identify material risks from cybersecurity threats associated with our use of third-party service providers. Such processes include conducting due diligence and risk assessment of our current and potential vendors that examine such vendor’s cybersecurity protocols and adherence to applicable regulations.

We also maintain business continuity and disaster recovery plans to prepare for and respond to the potential for any disruption in the technology we rely on. Additionally, we maintain insurance coverage that, subject to its terms and conditions, is intended to help us cover certain costs associated with cybersecurity incidents and information system failures.

We (or the third parties we rely on) may not be able to fully, continuously, or effectively implement security controls as intended. As described above, we utilize a risk-based approach and judgment to determine whether and how to implement certain security controls and it is possible that we may not implement the necessary controls if we are unable to recognize or underestimate a particular risk. In addition, security controls, no matter how well designed or implemented, may only mitigate and not fully eliminate cybersecurity risks. Cybersecurity events, when detected by security tools or third parties, may not always be identified immediately or addressed in the manner intended by our cybersecurity incident response plan.

Governance

Based on the information available as of the date of this Annual Report, we have no reason to believe any risks from cybersecurity threats, including as a result of any previous cybersecurity incidents, have materially affected or are reasonably likely to materially affect us, including our business strategy, results of operations or financial condition. For additional information, see “Risks Related to Cybersecurity, Data Privacy and IT Systems,” in Item 1A, “Risk Factors” in this Annual Report on Form 10-K.

Given that cybersecurity risks can impact various areas of responsibility of the Committees of the Board, as well as the overall size of the Board, the Board believes it is useful and effective for the entire Board to maintain direct oversight over cybersecurity matters. We have implemented processes that will include regular updates to the Board from our Chief Executive Officer and Chief Financial Officer for its review and feedback regarding cybersecurity governance processes, the status of projects to strengthen internal cybersecurity, results from third-party assessments, and also discusses any significant cyber incidents, including recent incidents at other companies and the emerging threat landscape.

Our cybersecurity risk management strategy processes, discussed in greater detailed above, are led by our Chief Financial Officer, in conjunction with our outsourced security team, under the supervision of our Chief Executive Officer. Our Chief Financial Officer has over 5 years of prior work experience in various roles involving supervising the implementation of various information technology systems. These individuals are informed about and monitor the prevention, mitigation, detection and remediation of cybersecurity incidents through their management of, and participation in, the cybersecurity risk management and strategy processes described above, including their roles in our overall enterprise risk management. As discussed above, our Chief Executive Officer and Chief Financial Officer regularly report to the Board about cybersecurity threat risks, among other cybersecurity related matters.

Item 2. Properties

Our U.S. facilities are located at 380 Lackawanna Place, South Orange, New Jersey 07079 and 30 Leslie Court, Whippany, NJ 07981. We use these facilities to house our corporate headquarters, research, manufacturing, and distribution facilities.

We believe our current facilities are adequate to meet our needs, although we may consolidate facilities in the future. We do not own any real property for use in our operation or otherwise.

Item 3. Legal Proceedings

There are currently no material pending legal proceedings and, as far as we are aware, no governmental authority is contemplating any material proceeding to which we are a party or to which any of our properties is subject.

Item 4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Common Stock Information

Our common stock is quoted on the Nasdaq Capital Market under the symbol “NEPH”. Our common stock commenced trading on August 14, 2019.

As of December 31, 2023, there were approximately 44 holders of record and approximately 1,300 beneficial holders of our common stock.

Recent Sales of Unregistered Securities

Except as previously reported in our Quarterly Reports on Form 10-Q and our Current Reports on Form 8-K, we have not sold any equity securities during the year ended December 31, 2023, that were not registered under the Securities Act of 1933, as amended.

Issuer Repurchases of Equity Securities

There were no repurchases of our common stock during the fourth quarter of 2023.

Equity Compensation Plan Information

See Part III, Item 12, under the heading “Equity Compensation Plan Information,” which is incorporated by reference herein.

Item 6. Reserved

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion includes forward-looking statements about our business, financial condition and results of operations including discussions about management’s expectations for our business. These statements represent projections, beliefs and expectations based on current circumstances and conditions and in light of recent events and trends, and these statements should not be construed either as assurances of performances or as promises of a given course of action. Instead, various known and unknown factors are likely to cause our actual performance and management’s actions to vary, and the results of these variances may be both material and adverse. A list of the known material factors that may cause our results to vary, or may cause management to deviate from its current plans and expectations, is included in Item 1A, “Risk Factors,” of this Annual Report on Form 10-K. The following discussion should also be read in conjunction with the consolidated financial statements and notes included in Item 8, “Financial Statements and Supplemental Data,” of this Annual Report on Form 10-K.

Business Overview

We are a commercial-stage company that develops and sells high performance water solutions to the medical and commercial markets.

Our medical water filters, mostly classified as ultrafilters, are used primarily by hospitals for the prevention of infection from waterborne pathogens, such as legionella and pseudomonas, and in dialysis centers for the removal of biological contaminants from water and bicarbonate concentrate. Because our ultrafilters capture contaminants as small as 0.005 microns in size, they minimize exposure to a wide variety of bacteria, viruses, fungi, parasites, and endotoxins.

Our commercial water filters improve the taste and odor of water and reduce biofilm, cysts, particulates, and scale build-up in downstream equipment. Our products are marketed primarily to the food service, hospitality, convenience store, and health care markets, and are also sold into medical institutions to supplement our medical filters.

We previously held a majority stake in Specialty Renal Products, Inc. (“SRP”), a development-stage medical device company that was focused primarily on developing hemodiafiltration (“HDF”) technology. On May 13, 2022, the FDA gave 510(k) clearance to SRP’s second-generation model of the OLpūrH2H Hemodiafiltration System, which enables nephrologists to provide HDF treatment to patients with end stage renal disease. In January 2023, SRP management began exploring strategic partnerships to support a commercial launch of the HDF product but was unsuccessful in identifying a partner. By late February 2023, SRP had nearly exhausted its capital resources and, due to its limited capital and lack of prospects for securing a strategic partnership or additional financing, the board of directors of SRP adopted a plan on March 6, 2023 to wind down SRP operations, liquidate its remaining assets and dissolve the company. That plan was approved by SRP’s stockholders on March 9, 2023, and on April 13, 2023, SRP filed a certificate of dissolution with the State of Delaware. SRP’s cash resources were sufficient to satisfy all of its outstanding liabilities other than its obligations to us under a loan with an outstanding balance of approximately $1.5 million. Accordingly, SRP assigned to Nephros all of its remaining assets, including its intellectual property rights in the HDF2 device, in satisfaction of its outstanding loan balance. Although we have no current plans to do so, we may re-evaluate opportunities for HDF in the future.

Recent Accounting Pronouncements

We are subject to recently issued accounting standards, accounting guidance and disclosure requirements. For a description of these new accounting standards, see “Note 2 – Summary of Significant Accounting Policies,” to our consolidated financial statements included in Item 8, “Financial Statements and Supplementary Data,” of this Annual Report on Form 10-K.

Critical Accounting Policies and Estimates

Our discussion and analysis of our financial condition and results of operations is based on our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States (“GAAP”). The preparation of financial statements in accordance with GAAP requires application of management’s subjective judgments, often requiring estimates about the effect of matters that are inherently uncertain and may change in subsequent periods. Our actual results may differ substantially from these estimates under different assumptions or conditions. While our significant accounting policies are described in more detail in “Note 2 – Summary of Significant Accounting Policies,” to our consolidated financial statements included in Item 8, “Financial Statements and Supplementary Data,” of this Annual Report on Form 10-K, we believe that the following accounting policies require the application of significant judgments and estimates.

Inventories

Our inventory reserve requirements are based on various factors including product expiration date and estimates for the future sales of the product. Reserve assessments include inventory obsolescence based upon expiration date, damaged, or rejected product, slow-moving products, and other considerations. We continue to monitor our inventory reserves amounts and policies, and to update both as required by relevant circumstances.

Results of Operations

Fluctuations in Operating Results

Our results of operations have fluctuated significantly from period to period in the past, including recently, and are likely to continue to do so in the future. We anticipate that our annual results of operations will be impacted for the foreseeable future by several factors, including market acceptance of our products, expense management, and progress in continuing to achieve positive operating cash flow. Due to these fluctuations, we believe that the period-to-period comparisons of our operating results are not a good indication of our future performance.

Fiscal Year Ended December 31, 2023, Compared to the Fiscal Year Ended December 31, 2022

The following table sets forth our summarized, consolidated results of operations for the years ended December 31, 2023 and 2022 (in thousands except percentages):

Net Revenues.

Total net revenues increased 43% in the year ended December 31, 2023, driven by investments in our executive and sales organizations, as well as partnering with a master distributor for much of our commercial business.

Gross Profit Margin

Gross profit margin was approximately 59% for the year ended December 31, 2023, compared to approximately 47% for the year ended December 31, 2022. The increase of approximately 12 percentage points reflects a return to target gross margins of 55%-60%. Lower gross margins in 2022 were primarily driven by large inventory write-downs due to expired product, and higher shipping expense from supply chain disruptions.

Research and Development Expenses

Research and development expenses decreased 30% primarily due to the wind down of SRP in 2023 and consequently a reduction in SRP-related research and development expense of $0 in 2023 versus $376,000 in 2022, and slightly decreased investment in 2023 in water filter research and development.

Depreciation and Amortization Expense

Depreciation and amortization expenses were $0.2 million for each of the years ended December 31, 2023 and 2022.

Selling, General and Administrative Expenses

Selling, general and administrative expenses increased $1.3 million or 17%, primarily due to increased bonus and sales commission expense associated with higher sales, the hiring of a new CEO and CFO to replace one person acting in both positions, and increased hires to support the sales organization.

Interest Expense

Interest expense was approximately $2,000 for the year ended December 31, 2023 compared to $20,000 for the year ended December 31, 2022. This reduction is primarily related to a lower principal balance of the company’s secured note payable.

Interest Income

Interest income was approximately $64,000 for the year ended December 31, 2023 compared to approximately $14,000 for the ended December 31, 2022. The increase in interest income is due to higher interest rates earned on invested cash balances.

Other Income (Expense), net

Other expense was approximately $44,000 for the year ended December 31, 2023, compared to other income of $64,000 for the year ended December 31, 2022. This decrease is primarily a result of losses on foreign currency transactions in 2023. For the year ended December 31, 2022, other income related to the release of the cumulative translation adjustment from accumulated other comprehensive income (loss) on the liquidation of a foreign entity, related to the closure in the second quarter of 2022 of Nephros International, our wholly-owned subsidiary.

Loss from discontinued operations

Loss from discontinued operations was approximately $2.8 million for the year ended December 31, 2022. The discontinued operations are related to the company’s former PDS operating segment.

Liquidity and Capital Resources

The following table summarizes our liquidity and capital resources as of December 31, 2023 and 2022 and is intended to supplement the more detailed discussion that follows. The amounts stated are expressed in thousands.

We operate under an Investment, Risk Management and Accounting Policy adopted by our Board of Directors. Such policy limits the types of instruments or securities in which we may invest our excess funds: U.S. Treasury Securities; Certificates of Deposit issued by money center banks; Money Funds by money center banks; Repurchase Agreements; and Eurodollar Certificates of Deposit issued by money center banks. This policy provides that our primary objectives for investments are the preservation of principal and achieving sufficient liquidity to meet our forecasted cash requirements. In addition, provided that such primary objectives are met, we may seek to achieve the maximum yield available under such constraints.

At December 31, 2023, we had an accumulated deficit of $144.4 million and we expect to incur additional operating losses from operations until such time, if ever, that we are able to increase product sales and/or licensing revenue to achieve profitability.

Based on cash that is available for our operations and projections of our future operations, as well as the fact that we generated $0.7 million in cash flow in 2023, we believe that our existing cash resources together with our anticipated revenue, will be sufficient to fund our current operating plan through at least the next 12 months from the date of issuance of the consolidated financial statements in this Annual Report on Form 10-K. Additionally, our operating plans are designed to help control operating costs, to increase revenue and to raise additional capital until such time as we generate sufficient cash flows to fund operations. If there were a decrease in the demand for our products due to either economic or competitive conditions, or if we are otherwise unable to achieve our plan or achieve our anticipated operating results, there could be a significant reduction in liquidity due to our possible inability to cut costs sufficiently. In such event, the Company may need to take further actions to reduce its discretionary expenditures, including further reducing headcount, reducing spending on R&D projects and reducing other variable costs.

Our future liquidity sources and requirements will depend on many other factors, including:

We expect to put our current capital resources toward the development, marketing, and sales of our water filtration products and working capital purposes.

Net cash provided by operating activities was $0.8 million for the year ended December 31, 2023 compared to net cash used in operating activities of approximately $3.2 million for the year ended December 31, 2022, an increase of $4.1 million. This increase of $4.1 million is due primarily to a decrease in the net loss incurred of $5.5 million, in addition there was approximately $1.4 million in non-cash charges for impairment of assets held for sale in 2022.

Net cash used in investing activities was $0.1 million for the years ended December 31, 2023 and 2022

Net cash used in financing activities was approximately $79,000 for the year ended December 31, 2023. This was primarily from payments of $71,000 on our secured note, principal payments of approximately $7,000 on our finance lease obligation and principal payments of approximately $1,000 on our equipment financing debt.

Net cash provided by financing activities was $34,000 for the year ended December 31, 2022. This was primarily from proceeds from the exercise of warrants of $0.2 million and from the sale to Nephros of SRP preferred shares of $0.2 million, offset partially by payments of $0.3 million on our secured note, payments of employee taxes on restricted stock of approximately $31,000, principal payments of approximately $12,000 on our finance lease obligation and principal payments of approximately $3,000 on our equipment financing debt.

Purchase Commitments

In exchange for the rights granted under the License and Supply Agreement with Medica (see Note 9 – License and Supply Agreement, net), the Company agreed to make certain minimum annual aggregate purchases from Medica over the term of the License and Supply Agreement. For the year ended December 31, 2023, the Company had agreed to make minimum annual aggregate purchases from Medica of €3.8 million (approximately $4.1 million). For the year ended December 31, 2023, aggregate purchase commitments totaled €4.9 million (approximately $5.3 million). All purchase agreements were met.

Future purchase commitments under the License and Supply Agreement with Medica are as follows:

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

Not required for smaller reporting companies.

Item 8. Financial Statements and Supplementary Data

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Stockholders of

Nephros, Inc.

Opinion on the Financial Statements

We have audited the accompanying balance sheets of Nephros, Inc. (the “Company”) as of December 31, 2023 and 2022, and the related statements of operations and comprehensive loss, changes in stockholders’ equity, and cash flows for each of the two years in the period ended December 31, 2023, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2023 and 2022, and the results of its operations and its cash flows for each of the two years in the period ended December 31, 2023, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that (i) relates to accounts or disclosures that are material to the financial statements and (ii) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Inventory Valuation

Critical Audit Matter Description

As described in Note 2 to the financial statements, inventory consists of finished goods and raw materials and is valued at the lower of cost or net realizable value using the first-in, first-out method. The Company’s inventory reserve requirements are based on various factors including product expiration date and estimates for the future sales of the product. Reserve assessments include inventory obsolescence based upon expiration date, damaged or rejected product, slow-moving products, and other considerations.

We identified the assessment of the excess and obsolete inventory reserve as a critical audit matter. The principal consideration for our determination that this is a critical audit matter is the significant judgment by management to estimate the excess and obsolete inventory reserve, which led to a high degree of auditor judgment, subjectivity and effort in performing procedures to evaluate management’s significant assumptions.

How We Addressed the Matter in Our Audit

Addressing the matter involved performing procedures and evaluating audit evidence in connection with forming our overall opinion on the financial statements. The primary procedures we performed to address this critical audit matter included:

NEPHROS, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(In thousands, except share and per share amounts)

The accompanying notes are an integral part of these consolidated financial statements.

NEPHROS, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE LOSS

(In thousands, except share and per share amounts)

The accompanying notes are an integral part of these consolidated financial statements.

NEPHROS, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CHANGES IN STOCKHOLDERS’ EQUITY

(In thousands, except share amounts)

The accompanying notes are an integral part of these consolidated financial statements.

NEPHROS, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)

The accompanying notes are an integral part of these consolidated financial statements.

NEPHROS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS