UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2023

or

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission File Number 001-41364

TENON MEDICAL, INC.

(Exact name of registrant as specified in its charter)

104 Cooper Court

Los Gatos, CA 95032

(Address of principal executive offices) (Zip Code)

(408) 649-5760

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes  ☒    No  ☐ 

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes  ☒     No  ☐ 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate market value of voting and non-voting common equity held by non-affiliates of the registrant on June 30, 2023 (the last business day of the registrant’s most recently completed second quarter) was approximately $4,891,898, which is based on a closing price per share of $2.75 on such date.

As of March 29, 2024, the registrant had a total of 3,726,974 shares of its common stock, $0.001 par value per share, outstanding.

Tenon Medical, Inc.

Annual Report on Form 10-K

For the Fiscal Year ended December 31, 2023

TABLE OF CONTENTS

CAUTIONARY STATEMENT REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995, Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). We have based these forward-looking statements largely on our current expectations and projections about future events and financial trends impacting the financial condition of our business. Forward-looking statements should not be read as a guarantee of future performance or results and will not necessarily be accurate indications of the times at, or by, which such performance or results will be achieved. Forward-looking statements are based on information available at the time those statements are made and/or management’s good faith belief as of that time with respect to future events and are subject to risks and uncertainties that could cause actual performance or results to differ materially from those expressed in or suggested by the forward-looking statements.

Forward-looking statements include all statements that are not historical facts. In some cases, you can identify forward-looking statements by terms such as “may,” “will,” “should,” “could,” “would,” “expect,” “intend,” “seek,” “plan,” “anticipate,” “believe,” “estimate,” “project,” “predict,” “potential,” “might,” “forecast,” “continue,” or the negative of those terms, and similar expressions and comparable terminology intended to reference future periods. Forward-looking statements include, but are not limited to, statements about:

Should one or more of these risks or uncertainties materialize, or should the underlying assumptions prove incorrect, actual results may differ significantly from those anticipated, believed, estimated, expected, intended or planned.

Factors or events that could cause our actual results to differ may emerge from time to time, and it is not possible for us to predict all of them. We cannot guarantee future results, levels of activity, performance or achievements. Accordingly, the forward-looking statements in this Annual Report on Form 10-K should not be regarded as representations that the results or conditions described in such statements will occur or that our objectives and plans will be achieved, and we do not assume any responsibility for the accuracy or completeness of any of these forward-looking statements.

Use of Certain Defined Terms

Except where the context otherwise requires and for the purposes of this report only:

Risk Factors Summary

Our business is subject to numerous risks and uncertainties, any one of which could materially adversely affect our results of operations, financial condition or business. These risks include, but are not limited to, those listed below. This list is not complete, and should be read together with Item 1A, “Risk Factors” and should not be relied upon as an exhaustive summary of the material risks we face.

PART I

Item 1. Business

Introduction

Tenon Medical, Inc. (the “Company”), was incorporated in the State of Delaware on June 19, 2012 and was headquartered in San Ramon, California until June 2021 when it relocated to Los Gatos, California. The Company is a medical device company that has developed The Catamaran™ SI Joint Fusion System (“the Catamaran System”) that offers a novel, less invasive approach to the sacroiliac joint (the “SI Joint”) using a single, robust, titanium implant for treatment of the most common types of SI Joint disorders that cause lower back pain. The Company received U.S. Food and Drug Administration (“FDA”) clearance in 2018 for The Catamaran System and is currently focused on the US market. Since the national launch of the Catamaran System in October 2022, the Company is focused on three commercial opportunities: 1) Primary SI Joint procedures, 2) Revision procedures of failed SI Joint implants and 3) SI Joint fusion adjunct to a spine fusion construct.

The Opportunity

We estimate that over 30 million American adults have chronic lower back pain. Published clinical studies have shown that 15% to 30% of all chronic lower back pain is associated with the SI-Joint. For patients whose chronic lower back pain stems from the Sacroiliac Joint (“SI-Joint”), our experience in both clinical trials and commercial settings indicates the system to be introduced by Tenon could be beneficial for patients who are properly diagnosed and screened for surgery by trained healthcare providers.

In 2019, approximately 475,000 patients in the United States were estimated to have received an aesthetic injection to temporarily alleviate pain emanating from the SI-Joint and/or to diagnose SI-Joint pain. Additionally, several non-surgical technologies have been introduced in the past 10 years to address patients who do not respond to conservative options, including systemic oral medications, opioids, physical therapy and injection therapy.

To date, the penetration of a surgical solution for this market has been relatively low (5-7%). We believe this is due to complex surgical approaches and suboptimal implant design of existing options. The penetration of this market with an optimized surgical solution is Tenon’s focus.

We believe the SI-Joint is the last major joint to be successfully addressed by the spine implant industry. Studies have shown that disability resulting from disease of the SI-Joint is comparable to the disability associated with a number of other serious spine conditions, such as knee and hip arthritis and degenerative disc disease, each of which has surgical solutions where an implant is used, and a multi-billion-dollar market exists.

The SI-Joint

The SI-Joint is a strong weight bearing synovial joint situated between the lumbar spine and the pelvis and is aligned along the longitudinal load bearing axis of the human spine when in an upright posture. It functions as a force transfer conduit where it transfers axial loads bi-directionally from the spine to the pelvis and lower extremities and allows forces to be transmitted from the extremities to the spine. It also provides load sharing between the hip and spine to contribute towards attenuation of impact shock and stress from activities of daily living.

The SI-Joint is a relatively immobile joint that connects the sacrum (the spinal segment that is attached to the base of the lumbar spine at the L5 vertebra) and the ilium of the pelvis. Each SI-Joint is approximately 2-4mm wide and irregularly shaped.

Motion of the SI-Joint features vertical shear and rotation. Although the rotational forces about the SI-Joint are relatively low, repetitive motions created by daily activities such as walking, jogging, twisting at the hips, and jumping can increase the stresses on the SI-Joint. If the SI-Joint is compromised through injury or degeneration, the load bearing and motion restraints from the surrounding anatomical structures of the SI-Joint will be compromised resulting in abnormal stress transfers across the joint to these structures, thereby further augmenting the degenerative cascade of the SI-Joint. Eventual pain and cessation of an individual’s normal activities due to a painful and unstable SI-Joint have led to an increase in the recent development of SI-Joint stabilization devices.

Non-Surgical Treatment of Sacroiliac Joint Disease

Several non-surgical treatments exist for suspected sacroiliac joint pain. These conservative steps often provide desired relief for the patient. Non-surgical treatments include: 

When conservative steps fail to deliver sustained pain relief and return to quality of life, specific diagnostic protocols are utilized to explore if a surgical option should be considered.

Diagnosis

Historically, diagnosing pain from the SI-Joint was not routinely a focus of orthopedic or neurosurgery training during medical school or residency programs. Due to its invasiveness, post-operative pain, and muscle disruption along with a difficult procedure overall, the open SI-Joint fusion procedure was rarely taught in these settings.

The emergence of various SI-Joint surgical technologies has generated a renewed discussion of SI-Joint issues. Of particular focus is the diagnostic protocol utilized to properly select patients for SI-Joint surgery. Patients with low back pain typically start with primary care physicians who often refer to pain specialists. Here, the patient will undergo traditional physical therapy combined with oral medications (anti-inflammatory, narcotic, etc.). If the patient fails to respond to these steps the pain specialist may move to therapeutic injections of the SI-Joint. These injections may serve to lessen inflammation to the point that the patient is satisfied. However, the impact from these injections is often transient. In this case the patient is often referred to a clinician to determine if the patient may be a candidate for surgical intervention. A series of provocative tests in clinic, combined with a specific injection protocol to isolate the SI-Joint as the pain generator is then utilized to confirm the need for surgical intervention. Published literature has shown this technique to be a very effective step to determine the best treatment to alleviate pain.

Limitations of Existing Treatment Options

Surgical fixation and fusion of the SI-Joint with an open surgical technique was first reported in 1908, with further reports in the 1920s. The open procedure uses plates and screws, requires a 6 to 12-inch incision and is extremely invasive. Due to the high invasiveness and associated morbidity, the use of this procedure is limited to cases involving significant trauma, tumor, etc.

Less invasive surgical options along with implant design began to emerge over the past 15 years. These options feature a variety of approaches and implant designs and have been met with varying degrees of adoption. Lack of a standard and accepted diagnostic approach, complexity of approach, high morbidity of approach, abnormally high complication rates and inability to radiographically confirm fusion have all been cited as reasons for low adoption of these technologies.

Commercialization

Tenon initiated its national commercial launch of the Catamaran System in October 2022 to address what we believe is a large market opportunity. The Catamaran System includes instruments and implants designed to prepare and fixate the SI-Joint for fusion. The Catamaran System is distinct from other competitive offerings in the following ways:

The fixation device and its key features are shown below:

Key Features   “Pontoon” in the ilium “Pontoon” in the sacrum “Pontoons and Bridge” filled with autologous bone from drilling process Leading edge osteotome creates defect and facilitates ease of insertion

The Catamaran System is a singular implant designed with several proprietary components which allow for it to be explicitly formatted to address the SI-Joint with a single approach and implant. This contrasts with several competitive implant systems that require multiple approach pathways and implants to achieve fixation. In addition, the inferior-posterior approach is designed to be direct to the joint and through limited anatomical structures which may minimize the morbidity of the approach. The implant features a patented dual pontoon open cell design which enables the clinician to pack the pontoons with the patient’s own autologous bone designed to promote bone fusion across the joint. The Catamaran System is designed specially to resist vertical shear and rotation of the joint in which it was implanted, helping stabilize the joint in preparation for eventual fusion.

The instruments we have developed are proprietary to the Catamaran System and specifically designed to transfix the SI-Joint and facilitate an inferior-posterior approach that is unique to the system.

Tenon also has developed a proprietary 2D placement protocol as well as a protocol for 3D navigation utilizing the latest techniques in spine surgery. These Tenon advancements are intended to further enhance the safety of the procedure and encourage more physicians to adopt the procedure.

In October 2022, we received Institutional Review Board (“IRB”) approval from WCG IRB for two separate Tenon-sponsored post market clinical studies of the Catamaran System. The approval by WCG allows designated Catamaran study centers to begin recruiting and enrolling patients into the clinical studies. The first approval from WCG IRB will support a prospective, multi-center, single arm post market study that will evaluate the clinical outcomes of patients with sacroiliac joint disruptions or degenerative sacroiliitis treated with the Catamaran System. Patients will be followed out to 24 months assessing various patient reported outcomes, radiographic assessments, and adverse events. The second prospective, multi-center, Catamaran study will evaluate 6-to-12-month radiographic outcomes to assess fusion of patients that have already undergone treatment with the Catamaran System. In addition, retrospective and prospective clinical outcomes will be evaluated. We anticipate completing enrollment by the end of the second quarter of 2024.

The Market

Based on market research and internal estimates, Tenon believes the potential market for surgical intervention of the SI-Joint to be 279,000 procedures annually in the U.S. alone, for a potential annual market of approximately $2.0 billion. These estimates are driven by coding data for SI-Joint injections to treat pain and informed assumptions relative to surgical intervention candidacy

Based on public information, we believe that the largest clinical device supplier in this market does approximately 16,000 SI-Joint fixations a year representing the largest market share. The other competitive devices that are offered are all products generally part of much larger companies with a variety of orthopedic devices and as such do not specifically call out the number of specific SI-Joint procedures performed with their products. It is our belief that all other competitive devices represent approximately another 5,000 potential SI-Joint procedures.

Based on this analysis we believe the market is vastly underserved and only penetrated 5-7%, leaving tremendous upside for a next generation device that meets the needs of this market.

Competitive Landscape

We believe Tenon is the first company to develop and manufacture a novel Inferior-Posterior approach featuring a dual pontoon fixation technology cleared by the FDA expressly for SI-Joint fusion. The approach, referred to as Inferior Posterior Sacroiliac Fusion is focused on these critical aspects of the surgical procedure:

Note the trajectory used in the Inferior Posterior approach:

The following are the primary factors on which companies compete in our industry:

Tenon believes that refined approaches and improved implant design will open the door to enhanced adoption and further penetration of this important market.

The Catamaran™ SI-Joint Fusion System Solution

Until October 2022, Tenon sold the Catamaran System to a limited number of clinician advisors to refine the product for a full commercial launch. In October 2022, Tenon initiated a full commercial launch at the NASS meeting in Chicago. The Catamaran System includes instruments and implants designed to prepare and fixate the SI-Joint for fusion. We believe the Catamaran System will address a large market opportunity with a superior product and is distinct from other competitive offerings in the following ways:

The fixation device and its key features are shown below:

Key Features   “Pontoon” in the ilium “Pontoon” in the sacrum “Pontoons and Bridge” filled with autologous bone from drilling process Leading edge osteotome creates defect and facilitates ease of insertion

The Catamaran System is a singular implant designed with several proprietary components which allow for it to be explicitly formatted to transfix the SI-Joint with a single approach and implant. This contrasts with several competitive implant systems that require multiple approach pathways and implants to achieve fixation. In addition, the Inferior-Posterior approach is designed to be direct to the joint and through limited anatomical structures which may minimize the morbidity of the approach. The implant features a patented dual pontoon open cell design which enables the clinician to pack the pontoons with the patient’s own autologous bone designed to promote bone fusion across the joint. The Catamaran System is designed specially to resist vertical shear and rotation of the joint in which it was implanted, helping stabilize the joint in preparation for eventual fusion.

The instruments we have developed are proprietary to The Catamaran System and specifically designed to facilitate an Inferior Posterior approach that is unique to the system.

Tenon also has developed a proprietary 2D placement protocol as well as a protocol for 3D navigation utilizing the latest techniques in spine surgery. These Tenon advancements are intended to further enhance the safety of the procedure and encourage more physicians to adopt the procedure.

The Catamaran System, as mentioned previously, is placed in the densest aspect of the SI-Joint as confirmed by the pre-op planning images below:

		Surgical Plan Key:   Yellow: Guidewire Purple: Lateral Pontoon (Ilium) Green: Medial Pontoon (Sacrum)
		Notes:   Upper Right Quadrant: The green and purple pontoons represent the placement in the dense bone inferior – contrasted with the dorsal gap superiorly where competitive systems are most often placed.   Lower Right Quadrant: The yellow and purple outlines represent the Catamaran System pontoons, illustrating the angle of insertion is away from the sacral neuro foramen providing for a much safter trajectory for device implantation.

The Procedure

We believe the Catamaran System and its differentiated characteristics allow for an efficient and effective procedure designed to deliver short-term stabilization and long-term fusion that can be confirmed radiographically. Shown below is an illustration demonstrating the unique placement of the Catamaran System inserted Inferior-Posterior and coming directly down to and transfixing the joint

The Catamaran System procedure is typically performed under general anesthesia using a specially designed instrument set we provide to prepare for the Inferior-Posterior access to the SI-Joint. Specially designed imaging and navigation protocols are designed to ensure the clinician has the proper entry point, trajectory, angle and depth so that the pontoons of the Catamaran System are placed for maximum fixation. The Catamaran System incorporates two pontoons and is designed so that when the system is impacted into the bone one pontoon is on the Illum side and the other is in the Sacrum side with the bridge spanning the joint, preventing shear and rotation of the joint. The device also features an open cell design where the patient’s own (autologous) bone is packed into the pontoons and the bridge to facilitate fusion across the joint. The leading edge of the bridge is designed to act as an osteotome, providing a self-created deficit upon insertion. These features are designed to create an ideal environment for bone ingrowth and fusion. Below is a fluoroscopic image of an implanted Catamaran Fixation Device spanning the SI-Joint.

Tenon believes the surgical approach and implant design it has developed, along with the 2D and 3D protocols for proper implantation will be received well by the clinician community who have been looking for a next generation device. Our initial clinical results indicate that the Catamaran System is promoting fusion across the joint as evidenced by post-op CT scans (the recognized gold standard widely accepted by the Clinical community).

Post-Op fluoroscopic image of implant spanning the SI-Joint		6-Month CT-Scan showing clear bridging bone fusion

A preliminary 18 case series (Michael Joseph Chaparro, MD, F.A.A.N.S., F.A.C.S.) has documented that the Catamaran System does in fact promote fusion across the SI-Joint, which many of our competitors have not been able to demonstrate. While products from some of our competitors use screws and triangular wedges to treat the SI-Joint, most do not effectively resist the vertical shear and twisting within the joint. This 18 patient series was presented at the North American Spine Society Annual Meeting in Chicago, IL in October 2022.

An independent biomechanical study (Lisa Ferrara, Ph.D. OrthoKinetic Technologies, LLC now part of Element) demonstrated that a single Catamaran SIJ Fixation Device was superior to predicate device in the areas of Fixation Strength, Shear Stiffness, Dynamic Endurance and Pullout Strength. We hold issued patents on the Catamaran System and its unique features including the dual pontoons and the open cell structure for bone graft packing. We also hold an issued patent for the method of placing the Catamaran System into the SI-Joint where one pontoon is in the ilium and the other in the sacrum.

The Catamaran System’s unique design has already demonstrated radiographically confirmed fusion in initial patients. We believe that this beneficial advantage along with a simpler, safer, and less painful procedure will make this the procedure of choice for most physicians. Tenon has initiated post market, IRB controlled clinical trials to demonstrate this technology delivers on these advantages.

Coverage and Reimbursement

When a Tenon procedure utilizing the Catamaran System is performed, the healthcare facility, either a hospital (inpatient or outpatient clinic), and the clinician submit claims for reimbursement to the patient’s insurer. Generally, the facility obtains a lump sum payment, or facility fee, for SI-Joint fusions. Our products are purchased by the facility, along with other supplies used in the procedure. The facility must also pay for its own fixed costs of operation, including certain operating room personnel involved in the procedure, ICD and other medical services care. If these costs exceed the facility reimbursement, the facility’s managers may discourage or restrict clinicians from performing the procedure in the facility or using certain technologies, such as the Catamaran System, to perform the procedure.

The Medicare 2022 national average hospital inpatient payment for SI-Joint procedures ranges from approximately $25,000 to approximately $59,000 depending on the procedural approach and the presence of Complication and Comorbidity/Major Complication and Comorbidity.

The Medicare 2022 national average hospital outpatient clinic payment is $21,897. We believe that insurer payments to facilities are generally adequate for these facilities to offer the Catamaran System procedure.

Physicians are reimbursed separately for their professional time and effort to perform a surgical procedure. Depending on the surgical approach, the incision size, type and extent of imaging guidance, indication for procedure, and the insurer, the Catamaran System procedure may be reported by the physician using any one of the applicable following CPT^® codes 27279, 27280, 27299. The Medicare 2022 national average payment for CPT^® 27279 is $807 and $1,352 for 27280. CPT^® 27299 has no national valuation. Clinicians, however, can present a crosswalk to another procedure believed to be fairly equivalent and/or comparison to a code for which there is an existing valuation.

For some governmental programs, such as Medicaid, coverage and reimbursement differ from state to state, and some state Medicaid programs may not pay an adequate amount for the procedures performed with our products, if any payment is made at all. Similar to Medicaid, many private payors’ coverage and payment may differ from one payer to another.

We believe that some clinicians view the current Medicare reimbursement amount as insufficient for current SI-Joint procedures, given the work effort involved with the procedure, including the time to diagnose the patient and obtain prior authorization from the patient’s health insurer when necessary. Many private payors require extensive documentation of a multi-step diagnosis before authorizing SI-Joint fusion for a patient. We believe that some private payors apply their own coverage policies and criteria inconsistently, and clinicians may experience difficulties in securing approval and coverage for sacroiliac fusion procedures. Additionally, many private payors limit coverage for open SI-Joint fusion to trauma, tumors or extensive spine fusion procedures involving multiple levels.

We believe the unique design of the Catamaran System and the fact the Catamaran System may be placed both via an open procedure based on the clinician’s determination of trauma induced SI-Joint pain or as a minimally invasive approach provides a unique and differentiated approach for the clinician to determine the reimbursement code that best fits the clinical problem. We believe this is a significant advantage over competitive devices by providing the clinician the clinical flexibility of offering the best clinical solution and approach for patients.

Sales and Marketing

We market and sell the Catamaran System primarily through independent distributors and sales representatives specializing in spine sales. Our target customer base includes approximately 12,000 physicians who perform spine and/or pelvic surgical procedures.

We provide general sales and marketing training to our independent sales representative along with comprehensive, hands-on cadaveric and dry-lab training sessions focusing on the clinical benefits of the Catamaran System and the importance of using the 2D and 3D protocols we have developed. We believe many clinicians have already been trained using one of the alternative products but have not been satisfied with the approach and technology. This provides Tenon with an opportunity to demonstrate to an already-trained-clinician the unique attributes of the Catamaran System.

Our business objective is to introduce the Next Generation Implant for SI-Joint Fixation. The past 10 years has seen an acceleration in recognition and discussion of the SI-Joint as a cause of pain that can be treated. However, adoption has been hindered by complexity of the procedure as evidenced by the significant number of reported Medical Device Records (MDR’s). The need for multiple implants and resulting post-op pain has also contributed to low adoption numbers. Our strategy is to provide a safer, faster, and better surgical experience and a significant pain reduction benefit for the patient. Our goals are simple but impactful and as such we plan on the following:

Regulatory Status

Tenon has received FDA 510(k) clearance to market and sell the Catamaran System for sacroiliac joint fusion for conditions including sacroiliac joint disruptions and degenerative sacroiliitis.

Research & Development

Our initial development of the Catamaran System has incorporated several differentiating features which we believe will make an important contribution for many patients suffering from SI-Joint pain. To our knowledge, no other competitive product incorporates these Next Generation features:

The Tenon development plan is to expand the Catamaran System offering by introducing a series of implant lengths so that the clinician has a full complement of sized implants to choose from depending on the patient’s anatomy. These product enhancements will enable the clinician to optimize the size of each implant to ensure full fixation based on anatomy. Tenon believes, based on literature searches of prior SI-Joint fixation technologies, that adverse event incidence where the implant has loosened or been misplaced thereby requiring a revision surgery could reach 20%. Tenon believes that its ability to make the Catamaran System a specifically sized fixation device will benefit many patients requiring a revision surgery.

The Catamaran System shown below has been cleared by the FDA for commercialization. This patented titanium implant incorporates the Catamaran SI-Joint Fixation Device pontoon design and the open cell configuration which we believe, when filled with the patient’s autologous bone, promotes fusion. The two images below show a comparison of a competitive implant requiring three implants and the Catamaran System unique pontoon design showing the need of only one implant to cover the same amount of the SI-Joint.

The Catamaran™ SIJ Fusion System Single Implant		SI Bone iFuse® Three Implants

Our mission will be to continue developing enhancements to the Catamaran System to meet our customers’ changing needs and to improve the surgery’s effectiveness. This includes revision surgery options as well as options as an adjunct to long fusion constructs in the lumbar spine.

Additionally, Tenon will initiate various post marketing clinical studies in accordance with FDA cleared indications for use. Since we have already received FDA 510(k) clearance to market the Catamaran System, our clinical study activities will be focused on capturing post-market safety and efficacy data. Tenon has received IRB approval for two post-market trials, including a 50 patient, 10 center multi-center trial and a prospective CT trial to demonstrate fusion in patient who have already been treated with the Catamaran System. Clinical study endpoints may include but are not limited to; pain scoring, length of surgical procedure, blood loss, post-op pain, length of stay, duration of non-weight-bearing post-op, radiographic confirmation of fusion and surgical complication rates. Statistical analysis plans may be designed to demonstrate non-inferiority to historical control, as reported in published literature, which may be used for submission to peer reviewed articles / posters / presentations and the like.

Intellectual Property

Developing and maintaining a strong intellectual property position is an important element of our business. We maintain the intellectual property through a combination of patent protection, trademarks, and trade secrets. We have sought, and will continue to seek, patent protection for our technology, for improvements to our technology, as well as for any of our other technologies where we believe such protection will be advantageous.

As of March 29, 2024, we own four (4) issued U.S. utility patents, sixteen (16) pending U.S. utility patent applications, four (4) issued foreign utility patents in Australia, Canada, Japan and Israel, and two (2) pending foreign utility patent applications in the European Community, Brazil and Japan. We also have thirteen (13) registered trademarks (seven (7) U.S. and six (6) foreign) and twelve (12) pending trademark applications in the U.S.

Our utility patents and patent applications are directed to several different aspects of our sacroiliac (SI) joint stabilization technology and related patent platform. By way of example, our granted patents and pending patent applications cover various structural features of our unique Catamaran SI-Joint prosthesis and means for employing same to stabilize a dysfunctional SI-Joint.

The term of individual patents depends on the legal term for patents in the countries in which they are granted. In most countries, including the United States, the patent term for a utility patent is generally 20 years from the earliest claimed filing date of a nonprovisional patent application in the applicable country. Our issued U.S. and foreign utility patents are anticipated to naturally expire around 2031, and our U.S. pending utility patent applications, if issued into patents, are similarly anticipated to naturally expire around 2031, excluding any additional patent term adjustment(s) or extension(s), and assuming payment of all applicable maintenance or annuity fees. Once a patent expires, patent protection ends and an invention enters the public domain allowing anyone to commercially exploit the invention without infringing the patent.

We cannot guarantee that patents will be issued from any of our pending applications or that issued patents will be of sufficient scope or strength to provide meaningful protection for our technology. Notwithstanding the scope of the patent protection available to us, a competitor could develop methods or devices that are not covered by our patents or circumvent these patents. Furthermore, although, at present, we are unaware of any patent applications that may result in one or more issued patents that our existing products or technologies may be alleged to infringe, since U.S. and foreign applications can take many months to publish, there may be applications unknown to us that may result in one or more issued patents that our existing products or technologies may be alleged to infringe.

As of March 29, 2024, we also have priority rights in and to several significant trademarks that support our products and brand, including seven (7) registered U.S. trademarks, twelve (12) U.S. trademark applications and six (6) foreign trademark applications in the European Community (excluding the United Kingdom), Australia and Japan.

Regulation

Domestic Regulation of Our Products and Business. Our research, development and clinical programs, as well as our manufacturing and marketing operations, are subject to extensive regulation in the United States and other countries. Most notably, all of our products sold in the United States are subject to the federal Food, Drug and Cosmetic Act (the “FDCA”), as implemented and enforced by the FDA. The FDA governs the following activities that we perform or that are performed on our behalf, to ensure that medical products distributed domestically or exported internationally are safe and effective for their intended uses:

There are numerous FDA regulatory requirements governing the clearance or approval and marketing of our products. These include:

The FDA has broad post-market and regulatory enforcement powers. We and our contract manufacturers are subject to announced and unannounced inspections by the FDA to determine our compliance with the QSR and other regulations and these inspections may include the manufacturing facilities of our suppliers. Tenon has a robust Supplier Qualification and Audit process as part of our quality system that ensures contract manufacturers, and their suppliers meet all requirements.

An FDA pre-approval inspection is not required for the Catamaran System due to its lower device classification, class II versus the higher class III. As is the case for most medical device firms, Tenon is subject to routine and “for cause” FDA inspections. Routine inspections are mandated by law every 2 years for class II and class III device manufacturers and make up the majority of FDA’s inspections. If a serious public health risk is identified during a routine inspection, the inspection may convert to a “for cause” inspection. In the current environment, FDA has limited compliance resources and has not been able to perform routine inspections in accordance with the 2-year mandate. Therefore, FDA uses a risk-based approach when deciding which firms should be selected for a routine inspection. Using the Establishment Registration and Device Listing databases, FDA identifies who manufactures and/or distributes which devices. The firms are then prioritized by risk, class III > class II > class I. Firms that have recently introduced a new device to the market also are given higher priority, as well as those that have had significant prior violations and complaints. At present, Tenon has not been selected for an FDA inspection. Tenon uses best practices to secure and maintain regulatory compliance by engaging with suppliers and contract manufacturing firms that are ISO 13485 (or equivalent) compliant and by periodically performing internal, external, and third-party inspections and audits of the facilities and systems to assess compliance.

FDA Premarket Clearance and Approval Requirements. Unless an exemption applies, each medical device we wish to commercially distribute in the United States will require either premarket notification, or 510(k), clearance or approval of a PMA from the FDA. The FDA classifies medical devices into one of three classes. Devices deemed to pose lower risks are placed in either Class I or II, which typically requires the manufacturer to submit to the FDA a premarket notification requesting permission to commercially distribute the device. This process is generally known as 510(k) clearance. Some low-risk devices are exempted from this requirement. Devices deemed by the FDA to pose the greatest risks, such as life-sustaining, life- supporting or implantable devices, or devices deemed not substantially equivalent to a previously cleared 510(k) device, are placed in Class III, requiring a PMA. If the FDA agrees that the device is substantially equivalent to a predicate device currently on the market, it will grant 510(k) clearance to commercially market the device. If the FDA determines that the device is “not substantially equivalent” to a previously cleared device, the device is automatically designated as a Class III device. The device sponsor must then fulfill more rigorous PMA requirements or can request a risk-based classification determination for the device in accordance with the “de novo” process, which is a route to market for novel medical devices that are low to moderate risk and are not substantially equivalent to a predicate device. All of our currently marketed products are Class II devices, subject to 510(k) clearance.

After a device receives 510(k) marketing clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change or modification in its intended use, will require a new 510(k) marketing clearance or, depending on the modification, PMA approval. The determination as to whether or not a modification could significantly affect the device’s safety or effectiveness is initially left to the manufacturer using available FDA guidance. Many minor modifications today are accomplished by a “letter to file” in which the manufacture documents the rationale for the change and why a new 510(k) is not required. However, the FDA may review such letters to file to evaluate the regulatory status of the modified product at any time and may require the manufacturer to cease marketing and recall the modified device until 510(k) clearance or PMA approval is obtained. The manufacturer may also be subject to significant regulatory fines or penalties.

Clinical Trials. Clinical trials are generally required to support a PMA application and are sometimes required for 510(k) clearance. Such trials for implanted devices such as the Catamaran SIJ Fixation Device generally require an investigational device exemption application, or IDE, approved in advance by the FDA for a specified number of subjects and study sites, unless the product is deemed a nonsignificant risk device eligible for more abbreviated IDE requirements. Clinical trials are subject to extensive monitoring, recordkeeping, and reporting requirements. Clinical trials must be conducted under the oversight of an institutional review board, or IRB, for the relevant clinical trial sites and must comply with FDA regulations, including but not limited to those relating to good clinical practices. To conduct a clinical trial, we also are required to obtain the subjects’ informed consent in form and substance that complies with both FDA requirements and state and federal privacy and human subject protection regulations. We, the FDA, or the institutional review board, or IRB, could suspend a clinical trial at any time for various reasons, including a belief that the risks to study subjects outweigh the anticipated benefits. Even if a trial is completed, the results of clinical testing may not adequately demonstrate the safety and effectiveness of the device or may otherwise not be sufficient to obtain FDA clearance or approval to market the product in the United States.

Pervasive and Continuing Regulation. After a device is placed on the market, numerous regulatory requirements continue to apply. These include:

The FDA has broad post-market and regulatory enforcement powers. We are subject to unannounced inspections by the FDA to determine our compliance with the QSR and other regulations, and these inspections may include the manufacturing facilities of some of our subcontractors. Failure by us or by our suppliers to comply with applicable regulatory requirements can result in enforcement action by the FDA or other regulatory authorities, which may result in sanctions including, but not limited to:

The FDA has not yet inspected our contract manufacturer’s manufacturing facilities.

Promotional Materials “Off-Label” Promotion. Advertising and promotion of medical devices, in addition to being regulated by the FDA, are also regulated by the Federal Trade Commission and by state regulatory and enforcement authorities. If the FDA determines that our promotional materials or training constitutes promotion of an unapproved use, it could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions, including the issuance of an untitled letter, a warning letter, injunction, seizure, civil fine, or criminal penalties. It is also possible that other federal, state, or foreign enforcement authorities might take action if they consider our promotional or training materials to constitute promotion of an unapproved use, which could result in significant fines or penalties under other statutory authorities, such as laws prohibiting false claims for reimbursement. In that event, our reputation could be damaged, and adoption of the products would be impaired.

In addition, under the federal Lanham Act and similar state laws, competitors, and others can initiate litigation relating to advertising claims.

Healthcare Fraud and Abuse

Federal and state governmental agencies and equivalent foreign authorities subject the healthcare industry to intense regulatory scrutiny, including heightened civil and criminal enforcement efforts. These laws constrain the sales, marketing and other promotional activities of medical device manufacturers by limiting the kinds of financial arrangements we may have with hospitals, physicians and other potential purchases of our products. Federal healthcare fraud and abuse laws apply to our business when a customer submits a claim for an item or service that is reimbursed under Medicare, Medicaid, or other federally funded healthcare programs. Descriptions of some of the laws and regulations that may affect our ability to operate follows.

The federal Anti-Kickback Statute prohibits, among other things, persons from knowingly and willfully soliciting, receiving, offering, or paying remuneration, directly or indirectly, in cash or in kind, to induce or reward either the referral of an individual for, or the purchase, order or recommendation of, items or services for which payment may be made, in whole or in part, under federal healthcare programs. The term “remuneration” has been broadly interpreted to include anything of value, and the government can establish a violation of the Anti-Kickback Statute without proving that a person or entity had actual knowledge of, or a specific intent to violate, the law. The Anti-Kickback Statute is subject to evolving interpretations and has been applied by government enforcement officials to a number of common business arrangements in the medical device industry. There are a number of statutory exceptions and regulatory safe harbors protecting some common activities from prosecution; however, those exceptions and safe harbors are drawn narrowly, and there is no exception or safe harbor for many common business activities. Failure to meet all of the requirements of a particular statutory exception or regulatory safe harbor does not make the conduct per se illegal under the Anti-Kickback Statute, but the legality of the arrangement will be evaluated on a case-by-case basis based on the totality of the facts and circumstances. A number of states also have anti-kickback laws that establish similar prohibitions that may apply to items or services reimbursed by government programs, as well as by any third-party payors, including commercial payors.

The civil False Claims Act prohibits, among other things, knowingly presenting or causing the presentation of a false or fraudulent claim for payment of federal funds, or knowingly making, or causing to be made, a false record or statement material to a false or fraudulent claim to avoid, decrease or conceal an obligation to pay money to the federal government. A claim including items or services resulting from a violation of the Anti- Kickback Statute constitutes a false or fraudulent claim for purposes of the False Claims Act. Actions under the False Claims Act may be brought by the government or as a qui tam action by a private individual in the name of the government. Qui tam actions are filed under seal and impose a mandatory duty on the U.S. Department of Justice to investigate such allegations. Most private citizen actions are declined by the Department of Justice or dismissed by federal courts. However, the investigation costs for a company can be significant and material even if the allegations are without merit. There are also criminal penalties, including imprisonment and criminal fines, for making or presenting a false or fictitious or fraudulent claim to the federal government.

False Claims Act liability is potentially significant in the healthcare industry because the statute provides for treble damages and mandatory penalties of $11,181 to $22,363 per claim (adjusted annually for inflation). Because of the potential for large monetary exposure, healthcare companies often resolve allegations without admissions of liability for significant and sometimes material amounts to avoid the uncertainty of treble damages and per claim penalties that may awarded in litigation proceedings. Moreover, to avoid the risk of exclusion from federal healthcare programs as a result of a False Claims Act settlement, companies may enter into corporate integrity agreements with the government, which may impose substantial costs on companies to ensure compliance.

In addition, HIPAA created federal criminal statutes that prohibit, among other actions, knowingly and willfully executing, or attempting to execute, a scheme to defraud any healthcare benefit program, including private third-party payors, knowingly and willfully embezzling or stealing from a healthcare benefit program, willfully obstructing a criminal investigation of a healthcare offense, and knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false, fictitious or fraudulent statement in connection with the delivery of or payment for healthcare benefits, items or services.

The federal Physician Payment Sunshine Act, implemented by CMS as the Open Payments program, requires manufacturers of drugs, devices, biologics and medical supplies for which payment is available under Medicare, Medicaid, or the Children’s Health Insurance Program to report annually to CMS information related to payments or other “transfers of value” made to physicians and teaching hospitals, and requires applicable manufacturers to report annually to CMS ownership and investment interests held by physicians and their immediate family members and payments or other “transfers of value” to such physician owners.

Certain states also mandate implementation of corporate compliance programs, impose restrictions on device manufacturer marketing practices, and/or require tracking and reporting of gifts, compensation, and other remuneration to healthcare professionals and entities.

The Foreign Corrupt Practices Act and similar anti-bribery laws in other countries, such as the UK Bribery Act, generally prohibit companies and their intermediaries from making improper payments to government officials and/or other persons for the purpose of obtaining or retaining business. Our policies mandate compliance with these anti-bribery laws.

Violations of these federal and state fraud abuse laws can subject us to administrative, civil, and criminal penalties, including imprisonment, substantial fines, penalties, damages, and exclusion from participation in federal healthcare programs, including Medicare and Medicaid.

Data Privacy and Security Laws

HIPAA requires the notification of patients, and other compliance actions, in the event of a breach of unsecured PHI. If notification to patients of a breach is required, such notification must be provided without unreasonable delay and in no event later than 60 calendar days after discovery of the breach. In addition, if the PHI of 500 or more individuals is improperly used or disclosed, we could be required to report the improper use or disclosure to the U.S. Department of Health and Human Services, or HHS, which would post the violation on its website, and to the media. Failure to comply with the HIPAA privacy and security standards can result in civil monetary penalties up to $55,910 per violation, not to exceed $1.68 million per calendar year for non-compliance of an identical provision, and, in certain circumstances, criminal penalties with fines up to $250,000 per violation and/or imprisonment.

In addition, even when HIPAA does not apply, according to the FTC, failing to take appropriate steps to keep consumers’ personal information secure constitutes unfair acts or practices in or affecting commerce in violation of Section 5(a) of the FTCA, 15 U.S.C § 45(a). The FTC expects a company’s data security measures to be reasonable and appropriate in light of the sensitivity and volume of consumer information it holds, the size and complexity of its business, and the cost of available tools to improve security and reduce vulnerabilities. Medical data is considered sensitive data that merits stronger safeguards. The FTC’s guidance for appropriately securing consumers’ personal information is similar to what is required by the HIPAA Security Rule.

We are subject to the supervision of local data protection authorities in those jurisdictions where we are established or otherwise subject to applicable law. We depend on a number of third parties in relation to our provision of our services, a number of which process personal data on our behalf. With each such provider we enter into contractual arrangements to ensure that they only process personal data according to our instructions, and that they have sufficient technical and organizational security measures in place. Where we transfer personal data outside the EEA, we do so in compliance with the relevant data export requirements. We take our data protection obligations seriously, as any improper disclosure, particularly with regard to our customers’ sensitive personal data, could negatively impact our business and/or our reputation.

Manufacturing and Supply

We do not manufacture any products or component parts and currently use five contract manufacturers to produce all of our instruments, implants and sterilization cases. The majority of our instruments have a secondary manufacturing supplier, and we continually work with additional manufacturers to establish secondary manufacturing suppliers. Our contract manufacturers source and purchase all raw materials used in the manufacture of the Catamaran System which includes mainly stainless steel and aluminum for our instruments and sterilization cases and titanium for our implants.

We do not currently have manufacturing agreements with any of our contract manufacturers and orders are controlled through purchase orders. The Company does not believe its relationship with any one contract manufacturer is material to its business.

We believe the manufacturing operations of our contract manufacturers, and those of the suppliers of our manufacturers, comply with regulations mandated by the FDA, as well as Medical Devices Directive regulations in the EEA. Manufacturing facilities that produce medical devices or component parts intended for distribution world-wide are subject to regulation and periodic planned and unannounced inspection by the FDA and other domestic and international regulatory agencies.

In the United States, the product we sell is required to be manufactured in compliance with the QSR, which covers the methods used in, and the facilities used for, the design, testing, control, manufacturing, labelling, quality assurance, packaging, storage, and shipping.

We are required to demonstrate continuing compliance with applicable regulatory requirements and will be subject to FDA inspections. Further, we and certain of our contract manufacturers are required to comply with all applicable regulations and current good manufacturing practices. As set forth above, these FDA regulations cover, among other things, the methods and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, storage, and shipping of our products. Compliance with applicable regulatory requirements is subject to continual review and is monitored rigorously through periodic inspections. If we or our manufacturers fail to adhere to current good manufacturing practice requirements, this could delay production of our products and lead to fines, difficulties in obtaining regulatory approvals, recalls, enforcement actions, including injunctive relief or consent decrees, or other consequences, which could, in turn, have a material adverse effect on our financial condition or results of operations.

Product Liability and Insurance

The manufacture and sale of our products subjects us to the risk of financial exposure to product liability claims. Our products are used in situations in which there is a risk of serious injury or death. We carry insurance policies which we believe to be customary for similar companies in our industry. We cannot assure you that these policies will be sufficient to cover all or substantially all losses that we experience.

We endeavor to maintain executive and organization liability insurance in a form and with aggregate coverage limits that we believe are adequate for our business purposes.

Human Capital Resources

As of March 29, 2024, we have a total of 21 employees, all of whom are full-time, and 5 senior consulting advisors of various specialty including product development, general administrative and accounting. None of our employees is subject to a collective bargaining agreement, and we consider our relationship with our employees to be good.

Our human capital resources objectives include, as applicable, identifying, recruiting, retaining, incentivizing and integrating our existing and new employees, advisors and consultants. The principal purposes of our equity and cash incentive plans are to attract, retain and reward personnel through the granting of stock-based and cash-based compensation awards, in order to increase stockholder value and the success of our Company by motivating such individuals to perform to the best of their abilities and achieve our objectives.

Corporate Information

We were incorporated on June 6, 2012, in Delaware. Our principal executive offices are located at 104 Cooper Court, Los Gatos, CA 95032 and our telephone number is (408) 649-5760. Our website address is www.tenonmed.com. The information on, or that can be accessed through, our website is not part of this report. We have included our website address as an inactive textual reference only.

Item 1A. Risk Factors

Investing in our common stock is highly speculative and involves a significant degree of risk. Before you invest in our securities, you should give careful consideration to the following risk factors, in addition to the other information included in this Annual Report on Form 10-K, including our financial statements and related notes, before deciding whether to invest in our securities. The occurrence of any of the adverse developments described in the following risk factors could materially and adversely harm our business, financial condition, results of operations or prospects. In that case, the trading price of our common stock could decline, and you may lose all or part of your investment.

Risks Related to Our Business and Operations

We have incurred losses in the past, our financial statements have been prepared on a going concern basis and we may be unable to achieve or sustain profitability in the future.

To date, we have financed our operations primarily through the issuance of public and private equity and convertible notes. We have devoted substantially all of our resources to research and development, creating the infrastructure for a publicly traded medical device company, preparing for our national commercial launch, and clinical and regulatory matters for our products. There can be no assurances that we will be able to generate sufficient revenue from our existing products or from any future product candidates to transition to profitability and generate consistent positive cash flows. We expect that our operating expenses will continue to increase as we continue to build our commercial infrastructure, develop, enhance, and commercialize our existing and new products and incur additional operating and reporting costs associated with being a public company. As a result, we expect to continue to incur operating losses for the foreseeable future and may never achieve profitability. Furthermore, even if we do achieve profitability, we may not be able to sustain or increase profitability on an ongoing basis. If we do not achieve profitability, it will be more difficult for us to finance our business and accomplish our strategic objectives.

Our recurring losses from operations and negative cash flows raise substantial doubt about our ability to continue as a going concern. As a result, our independent registered public accounting firm included an explanatory paragraph in its report on our financial statements for the fiscal year ended, December 31, 2023, describing the existence of substantial doubt about our ability to continue as a going concern. Our expected future capital requirements may depend on many factors including expanding our clinician base, increasing the rate at which we train clinicians, the number of additional clinical papers initiated, and the timing and extent of spending on the development of our technology to increase our product offerings. We may need additional funding to fund our operations but additional funds may not be available to us on acceptable terms on a timely basis, if at all. We may seek funds through borrowings or through additional rounds of financing, including private or public equity or debt offerings. If we raise additional funds by issuing equity securities, our stockholders may experience dilution. Any future debt financing into which we enter may impose upon us additional covenants that restrict our operations, including limitations on our ability to incur liens or additional debt, pay dividends, repurchase our common stock, make certain investments, and engage in certain merger, consolidation or asset sale transactions. Any future debt financing or additional equity that we raise may contain terms that are not favorable to us or our stockholders. Furthermore, we cannot be certain that additional funding will be available on acceptable terms, if at all. If we are unable to raise additional capital or generate sufficient cash from operations to adequately fund our operations, we will need to curtail planned activities to reduce costs, which will likely harm our ability to execute on our business plan and continue operations.

Practice trends or other factors, including the COVID-19 pandemic, may cause procedures to shift from the hospital environment to ambulatory surgical centers (“ASCs”), where pressure on the prices of our products is generally more acute.

To protect health care professionals involved in surgical care and their patients, we anticipate that more outpatient eligible procedures will be performed in ASCs during the COVID-19 pandemic, and as its acuity declines and the healthcare system returns to a more normalized state. Since patients do not stay overnight in ASCs and COVID-19 patients would not otherwise be treated in ASCs, it is likely that the ASC will be viewed as a safer site of service for patients and health care providers, where the risk of transmission of COVID-19 can be more effectively controlled. Because ASC facility fee reimbursement is typically less than facility fee reimbursement for hospitals, we typically experience more pressure on the pricing of our products by ASCs than by hospitals, and the average price for which we sell our products to ASCs is less than the average prices we charge to hospitals. An accelerated shift of procedures using our products to ASCs as a result of the COVID-19 pandemic could adversely impact the average selling prices of our products and our revenues could suffer as a result.

If hospitals, clinicians, and other healthcare providers are unable to obtain coverage and reimbursement from third-party payors for procedures performed using our products, adoption of our products may be delayed, and it is unlikely that they will gain further acceptance.

Growing sales of our product depends on the availability of adequate coverage and reimbursement from third-party payors, including government programs such as Medicare and Medicaid, private insurance plans, and managed care programs. Hospitals, clinicians, and other healthcare providers that purchase or use medical devices generally rely on third-party payors to pay for all or part of the costs and fees associated with the procedures performed with these devices.

Adequate coverage and reimbursement for procedures performed with our products is central to the acceptance of our current and future products. We may be unable to sell our products on a profitable basis if third-party payors deny coverage, continue to deny coverage or reduce their current levels of payment, or if our costs for the product increase faster than increases in reimbursement levels.

Many private payors refer to coverage decisions and payment amounts determined by the Centers for Medicare and Medicaid Services, or CMS, which administers the Medicare program, as guidelines for setting their coverage and reimbursement policies. By June 30, 2016, all Medicare Administrative Contractors were regularly reimbursing for minimally invasive and/or open SI-Joint fusion. Private payors that do not follow the Medicare guidelines may adopt different coverage and reimbursement policies for procedures performed with our products. Private commercial payors have been slower to adopt positive coverage policies for minimally invasive and/or open SI-Joint fusion, and many private payors still have policies that treat the procedure as experimental or investigational and do not regularly reimburse for the procedure. Future action by CMS or third-party payors may further reduce the availability of payments to physicians, outpatient surgery centers, and/or hospitals for procedures using our products.

The healthcare industry in the United States has experienced a trend toward cost containment as government and private insurers seek to control healthcare costs. Payors are imposing lower payment rates and negotiating reduced contract rates with service providers and being increasingly selective about the technologies and procedures they choose to cover. There can be no guarantee that we will be able to provide the scientific and clinical data necessary to overcome these policies. Payors may adopt policies in the future restricting access to medical technologies like ours and/or the procedures performed using such technologies. Therefore, we cannot be certain that the procedures performed with each of our products will be reimbursed. There can be no guarantee that, should we introduce additional products in the future, payors will cover those products or the procedures in which they are used.

If the reimbursement provided by third-party payors to hospitals, clinicians, and other healthcare providers for procedures performed using our products is insufficient, adoption and use of our products and the prices paid for our implants may decline.

When a Tenon procedure utilizing the Catamaran System is performed, both the clinician and the healthcare facility, a hospital (inpatient or outpatient clinic), submit claims for reimbursement to the patient’s insurer. Generally, the facility obtains a lump sum payment, or facility fee, for SI-Joint fusions. Our products are purchased by the facility, along with other supplies used in the procedure. The facility must also pay for its own fixed costs of operation, including certain operating room personnel involved in the procedure, and other medical services care. If these costs exceed the facility reimbursement, the facility’s managers may discourage or restrict clinicians from performing the procedure in the facility or using certain technologies, such as the Catamaran System, to perform the procedure.

The Medicare 2022 national average hospital inpatient payment ranges from approximately $25,000 to approximately $59,000 depending on the procedural approach and the presence of Complication and Comorbidity (CC)/Major Complication and Comorbidity (MCC).

The Medicare 2022 national average hospital outpatient clinic payment is $21,897. We believe that insurer payments to facilities are generally adequate for these facilities to offer the Catamaran System. However, there can be no guarantee that these facility payments will not decline in the future. The number of procedures performed, and the prices paid for our implants may in the future decline if payments to facilities for SI-Joint fusions decline.

Clinicians are reimbursed separately for their professional time and effort to perform a surgical procedure. Depending on the surgical approach, the incision size, type and extent of imaging guidance, indication for procedure, and the insurer, the Catamaran System procedure may be reported by the clinician using any one of the applicable following CPT® codes 27279, 27280, 27299. The Medicare 2022 national average payment for CPT® 27279 is $807 and $1,325 for 27280. CPT® 27299 has no national valuation. Clinicians, however, can present a crosswalk to another procedure believed to be fairly equivalent and/or comparison to a code for which there is an existing valuation.

For some governmental programs, such as Medicaid, coverage and reimbursement differ from state to state, and some state Medicaid programs may not pay an adequate amount for the procedures performed with our products, if any payment is made at all. Similar to Medicaid, many private payors’ coverage and payment may differ from one payer to another as well.

We believe that some clinicians view the current Medicare reimbursement amount as insufficient for the procedure, given the work effort involved with the procedure, including the time to diagnose the patient and obtain prior authorization from the patient’s health insurer when necessary. Many private payors require extensive documentation of a multi-step diagnosis before authorizing SI-Joint fusion for a patient. We believe that some private payors apply their own coverage policies and criteria inconsistently, and clinicians may experience difficulties in securing approval and coverage for sacroiliac fusion procedures. Additionally, many private payors limit coverage for open SI-Joint fusion to trauma, tumors or extensive spine fusion procedures involving multiple levels. The perception by physicians that the reimbursement for SI-Joint fusion is insufficient to compensate them for the work required, including diagnosis, documentation, obtaining payor approval for the procedure, and burden on their office staff, may negatively affect the number of procedures performed and may therefore impede the growth of our revenues or cause them to decline.

We may not be able to convince physicians that the Catamaran System is an attractive alternative to our competitors’ products and that our procedure is an attractive alternative to existing surgical and non-surgical treatments of the SI-Joint.

Clinicians play the primary role in determining the course of treatment in consultation with their patients and, ultimately, the product that will be used to treat a patient. In order for us to sell the Catamaran System successfully, we must convince clinicians through education and training that treatment with the Catamaran System is beneficial, safe, and cost-effective for patients as compared to our competitors’ products. If we are not successful in convincing clinicians of the merits of the Catamaran System, they may not use our product, and we will be unable to increase our sales and achieve or grow profitability.

Historically, most spine clinicians did not include SI-Joint pain in their diagnostic work-up because they did not have an adequate surgical procedure to perform for patients diagnosed with the condition. As a result, some patients with lower back pain resulting from SI-Joint dysfunction are misdiagnosed. We believe that educating clinicians and other healthcare professionals about the clinical merits and patient benefits of the Catamaran System is an important element of our growth. If we fail to effectively educate clinicians and other medical professionals, they may not include a SI-Joint evaluation as part of their diagnosis and, as a result, those patients may continue to receive unnecessary or only non-surgical treatment.

Clinicians may also hesitate to change their medical treatment practices for other reasons, including the following:

Furthermore, we believe clinicians may not widely adopt the Catamaran System unless they determine, based on experience, clinical data, and published peer-reviewed publications, that surgical intervention provides benefits or is an attractive alternative to non-surgical treatments of SI-Joint dysfunction. In addition, we believe support of our products relies heavily on long-term data showing the benefits of using our product. If we are unable to provide that data, clinicians may not use our product. In such circumstances, we may not achieve expected sales and may be unable to achieve profitability.

Clinicians and payors may not find our clinical evidence to be compelling, which could limit our sales, and on-going and future research may prove our product to be less safe and effective than initially anticipated.

All of the component parts of the Catamaran System have either received premarket clearance under Section 510(k) of the U.S. federal Food, Drug, and Cosmetic Act, or FDCA, or are exempt from premarket review. The 510(k) clearance process of the U.S. Food and Drug Administration, or FDA, requires us to document that our product is “substantially equivalent” to another 510(k) -cleared product. The 510(k) process is shorter and typically requires the submission of less supporting documentation than other FDA approval processes, such as a premarket approval, or PMA, and does not usually require pre-clinical or clinical studies. Additionally, to date, we have not been required to complete clinical studies in connection with the sale of our product. For these reasons, clinicians may be slow to adopt our product, third-party payors may be slow to provide coverage, and we may be subject to greater regulatory and product liability risks. Further, future patient studies or clinical experience may indicate that treatment with our product does not improve patient outcomes. Such results would slow the adoption of our product by clinicians, significantly reduce our ability to achieve expected sales, and could prevent us from achieving profitability. Moreover, if future results and experience indicate that our product causes unexpected or serious complications or other unforeseen negative effects, we could be subject to mandatory product recalls, suspension, or withdrawal of FDA clearance.

Pricing pressure from our competitors, changes in third-party coverage and reimbursement, healthcare provider consolidation, payor consolidation and the proliferation of “physician-owned distributorships” may impact our ability to sell our product at prices necessary to support our current business strategies.

If competitive forces drive down the prices we are able to charge for our product, our profit margins will shrink, which will adversely affect our ability to invest in and grow our business. The SI-Joint fusion market has attracted numerous new companies and technologies. As a result of this increased competition, we believe there will be continued and increased pricing pressure, resulting in lower gross margins, with respect to our product.

Even to the extent our product and procedures using our product are currently covered and reimbursed by third-party private and public payors, adverse changes in coverage and reimbursement policies that affect our product, discounts, and number of implants used may also drive our prices down and harm our ability to market and sell our product.

We are unable to predict what changes will be made to the reimbursement methodologies used by third-party payors. We cannot be certain that under current and future payment systems, in which healthcare providers may be reimbursed a set amount based on the type of procedure performed, such as those utilized by Medicare and in many privately managed care systems, the cost of our product will be justified and incorporated into the overall cost of the procedure. In addition, to the extent there is a shift from inpatient setting to outpatient settings, we may experience pricing pressure and a reduction in the number of the Catamaran System procedures performed.

Consolidation in the healthcare industry, including both third-party payors and healthcare providers, could lead to demands for price concessions or to the exclusion of some suppliers from certain of our markets, which could have an adverse effect on our business, results of operations, or financial condition. Because healthcare costs have risen significantly over the past several years, numerous initiatives and reforms initiated by legislators, regulators, and third-party payors to curb these costs have resulted in a consolidation trend in the healthcare industry to aggregate purchasing power. As the healthcare industry consolidates, competition to provide products and services to industry participants has become and will continue to become more intense. This in turn has resulted and will likely continue to result in greater pricing pressures and the exclusion of certain suppliers from important market segments as group purchasing organizations, independent delivery networks, and large single accounts continue to use their market power to consolidate purchasing decisions for hospitals. We expect that market demand, government regulation, third-party coverage, and reimbursement policies and societal pressures will continue to change the worldwide healthcare industry, resulting in further business consolidations and alliances among our customers, which may reduce competition, exert further downward pressure on the price of our product, and adversely impact our business, results of operations, or financial condition. As we continue to expand into international markets, we will face similar risks relating to adverse changes in coverage and reimbursement procedures and policies in those markets.

We operate in a very competitive business environment and if we are unable to compete successfully against our existing or potential competitors, our sales and operating results may be negatively affected and we may not grow.

The Catamaran System is subject to intense competition. Many of our competitors are major medical device companies that have substantially greater financial, technical, and marketing resources than we do, and they may succeed in developing products that would render our product obsolete or non-competitive. In addition, many of these competitors have significantly longer operating histories and more established reputations than we do. Our field is intensely competitive, subject to rapid change and highly sensitive to the introduction of new products or other market activities of industry participants. Our ability to compete successfully will depend on our ability to develop proprietary products that reach the market in a timely manner, receive adequate coverage and reimbursement from third-party payors, and are safer, less invasive, and more effective than alternatives available for similar purposes as demonstrated in peer-reviewed clinical publications. Because of the size of the potential market, we anticipate that other companies will dedicate significant resources to developing competing products.

In the United States, we believe that our primary competitors are currently SI-bone, Inc., Globus Medical, Inc., Medtronic plc, XTant Medical Holdings, Inc., and RTI Surgical, Inc. At any time, these or other industry participants may develop alternative treatments, products or procedures for the treatment of the SI-Joint that compete directly or indirectly with our product. If alternative treatments are, or are perceived to be, superior to our product, sales of our product and our results of operations could be negatively affected. Some of our larger competitors are either publicly traded or divisions or subsidiaries of publicly traded companies. These competitors may enjoy several competitive advantages over us, including:

New participants have increasingly entered the medical device industry. Many of these new competitors specialize in a specific product or focus on a particular market segment, making it more difficult for us to increase our overall market position. The frequent introduction by competitors of products that are or claim to be superior to our product or that are alternatives to our existing or planned products may make it difficult to differentiate the benefits of our product over competing products. In addition, the entry of multiple new products and competitors may lead some of our competitors to employ pricing strategies that could adversely affect the pricing of our product and pricing in the market generally.

As a result, without the timely introduction of new products and enhancements, our product may become obsolete over time. If we are unable to develop innovative new products, maintain competitive pricing, and offer products that clinicians and other physicians perceive to be as reliable as those of our competitors, our sales or margins could decrease, thereby harming our business.

We currently manufacture (through third parties) and sell products used in a single procedure, which could negatively affect our operations and financial condition.

Presently we do not sell any products other than the Catamaran System and related tools and instruments. Therefore, we are solely dependent on widespread market adoption of the Catamaran System and we will continue to be dependent on the success of this single product for the foreseeable future. There can be no assurance that the Catamaran System will gain a substantial degree of market acceptance among clinicians, patients or healthcare providers. Our failure to successfully increase sales of the Catamaran System or any other event impeding our ability to sell the Catamaran System, would result in a material adverse effect on our results of operations, financial condition and continuing operations.

We have a limited operating history and may face difficulties encountered by early-stage companies in new and rapidly evolving markets.

Even though we were formed in 2012 we have just built the infrastructure necessary to commercially launch the Catamaran System. Accordingly, we have a limited operating history upon which to base an evaluation of our business and prospects. In assessing our prospects, you must consider the risks and difficulties frequently encountered by early-stage companies in new and rapidly evolving markets, particularly companies engaged in the development and sales of medical devices. These risks include our inability to:

We can also be negatively affected by general economic conditions. Because of our limited operating history, we may not have insight into trends that could emerge and negatively affect our business. As a result of these or other risks, our business strategy might not be successful.

Our sales volumes and our operating results may fluctuate over the course of the year.

Since we had our first sales in April 2021 and our official national launch commenced in October 2022, we have limited history with respect to how rapidly adoption of the Catamaran System will occur. Sales growth could be slower than we have projected. Our sales and results of operations will be affected by numerous factors, including, among other things:

Some of the products we may seek to develop and introduce in the future will require FDA clearance or approval before commercialization in the United States. As a result, it will be difficult for us to forecast demand for these products with any degree of certainty. In addition, we will be increasing our operating expenses as we expand our commercial capabilities. Accordingly, we may experience significant, unanticipated quarterly losses. If our quarterly or annual operating results fall below the expectations of investors or securities analysts, the price of our common stock could decline substantially. Furthermore, any quarterly or annual fluctuations in our operating results may, in turn, cause the price of our common stock to fluctuate substantially. Quarterly comparisons of our financial results may not always be meaningful and should not be relied upon as an indication of our future performance.

If we do not successfully implement our business strategy, our business and results of operations will be adversely affected.

Our business strategy was based on assumptions about the market that might prove wrong. We believe that various demographics and industry-specific trends will help drive growth in the market and our business, but these demographics and trends have been and will continue to be uncertain. Actual demand for our product could differ materially from projected demand if our assumptions regarding these factors prove to be incorrect or do not materialize, or if alternative treatments to those offered by our product gains widespread acceptance. Also, our strategy of focusing exclusively on the SI-Joint market may limit our ability to grow. In addition, in order to increase our sales, we will need to identify and contract with independent sales representatives in existing and new regions as well, and in the future, commercialize new products. Moreover, we may decide to alter or discontinue aspects of our business strategy and may adopt different strategies due to business or competitive factors not currently foreseen, such as new medical technologies that would make our product obsolete. Any failure to implement our business strategy may adversely affect our business, results of operations, and financial condition.

Our business could suffer if we lose the services of key members of our senior management, key advisors or personnel.

We are dependent upon the continued services of key members of our senior management and a number of key advisors and personnel. The loss of members of our senior management team, key advisors or personnel, or our inability to attract or retain other qualified personnel or advisors, could have a material adverse effect on our business, results of operations, and financial condition. We do not maintain “key person” insurance for any of our executives or employees. In addition, several of the members of our executive management team are not subject to non-competition agreements that restrict their ability to compete with us. Accordingly, the adverse effect resulting from the loss of certain executives could be compounded by our inability to prevent them from competing with us.

Various factors outside our direct control may adversely affect manufacturing and distribution of our product.

The manufacture and distribution of our product is challenging. Changes that our contract manufacturers may make outside the purview of our direct control can have an impact on our processes, quality of our product, and the successful delivery of products to our customers. Mistakes and mishandling are not uncommon and can affect supply and delivery. Some of these risks include:

If any of these risks were to materialize, our ability to provide our product to customers on a timely basis would be adversely impacted.

We are dependent on a limited number of contract manufacturers, some of them single-source and some of them in single locations, for our product, and the loss of any of these contract manufacturers, or their inability to provide us with an adequate supply of products in a timely and cost-effective manner, could materially adversely affect our business.

We rely on contract manufacturers to supply our product. For us to be successful, our contract manufacturers must be able to provide us with product in substantial quantities, in compliance with regulatory requirements, in accordance with agreed upon specifications, at acceptable prices, and on a timely basis. We have a limited history with our current contract manufacturers and do not have long-term supply contracts with them. We are in the process of identifying and evaluating new contract manufacturers for our product. The inability to find the required contract manufacturers or the time required to switch contract manufacturers could adversely affect sales.

In addition, our anticipated growth could strain the ability of our contract manufacturers to deliver an increasingly large supply of product. Contract manufacturers often experience difficulties in scaling up production, including financial issues, or problems with production yields and quality control and assurance.

We use a small number of contract manufacturers for our instruments. Our dependence on such a limited number of contract manufacturers exposes us to risks, including, among other things:

If any one or more of these risks materialize, it could significantly increase our costs and impact our ability to meet demand for our product. If we are unable to satisfy commercial demand for our product in a timely manner, our ability to generate revenue would be impaired, market acceptance of our product could be adversely affected, and customers may instead purchase or use our competitors’ products. Additionally, we could be forced to seek alternative sources of supply.

Because of the nature of our internal quality control requirements, regulatory requirements, and the custom and proprietary nature of our product, we may not be able to quickly engage additional or replacement contract manufacturers for our product and accessories. We may also be required to assess any potential new contract manufacturer’s compliance with all applicable regulations and guidelines, which could further impede our ability to obtain our product in a timely manner. As a result, we could incur increased product costs, experience delays in deliveries of our product, suffer damage to our reputation, and experience an adverse effect on our business and financial results. Failure of any of our contract manufacturers to meet our product demand level would limit our ability to meet our sales commitments to our customers and could have a material adverse effect on our business.

We may also have difficulty obtaining similar product from other contract manufacturers that are acceptable to the FDA and the failure of our contract manufacturers to comply with strictly enforced regulatory requirements could expose us to delays in obtaining clearances or approvals, regulatory action including warning letters, product recalls, termination of distribution, product seizures, civil, administrative, or criminal penalties. We could incur delays while we locate and engage qualified alternative contract manufacturers, and we may be unable to engage alternative contract manufacturers on favorable terms or at all. Any such disruption or increased expenses could harm our commercialization efforts and adversely affect our ability to generate sales.

In addition, we expect that most of our contract manufacturers will operate at a facility in a single location and substantially all their inventory of component supplies and finished goods will be held at these locations. We, and our contract manufacturers, will take precautions to safeguard facilities, including acquiring insurance, adopting health and safety protocols, and utilizing off-site storage of computer data. However, vandalism, terrorism, or a natural or other disaster, such as an earthquake, fire, or flood, could damage or destroy equipment or component supplies or finished product, cause substantial delays in our operations, result in the loss of key information, and cause us to incur additional expenses. Our insurance may not cover our losses in any particular case. In addition, regardless of the level of insurance coverage, damage to our or our contract manufacturers’ facilities could harm our business, financial condition, and operating results.

As our sales grow, our contract manufacturers may encounter problems or delays in the manufacturing of our product or fail to meet certain regulatory requirements which could result in an adverse effect on our business and financial results.

To become profitable, our contract manufactures must manufacture our product in adequate quantities in compliance with regulatory requirements and at an acceptable cost. Increasing their capacity to manufacture and inspect our product may require them to improve internal efficiencies or require us to re-design or change the specifications of our product. Our contract manufacturers may encounter several difficulties in increasing this capacity, including:

If we are unable to satisfy commercial demand for the Catamaran System due to our contract manufacturer’s inability to manufacture and inspect our product, our ability to generate revenue would be impaired, market acceptance of our product could be adversely affected and customers may instead purchase or use our competitors’ products.

The size and future growth in the market for the SI-Joint fixation market have not been established based on market reports and our estimates are based on our own review and analysis of public information and may be smaller than we estimate, possibly materially. In addition, our estimates of cost savings to the economy and healthcare system as a result of the Catamaran System procedure are based on our internal estimates and market research and could also be smaller than we estimate, possibly materially. If our estimates and projections overestimate the size of this market or cost savings, our sales growth may be adversely affected.

We are not aware of an independent third-party study that reliably reports the potential market size for the SI-Joint fixation market. Therefore, our estimates of the size and future growth in the market for the Catamaran System product, including cost savings to the economy overall, including patients and employers, and to the healthcare system and the number of people currently suffering from lower back pain who may benefit from and be amenable to our procedure, is based on a number of internal and third-party studies, surveys, reports, and estimates. While we believe these factors have historically provided and may continue to provide us with effective tools in estimating the total market for our product and procedures and health cost savings, these estimates may not be correct and the conditions supporting our estimates may change at any time, thereby reducing the predictive accuracy of these underlying factors. For example, we have consulted with our clinical advisors and utilized public information as the basis for our market projections. Additionally, the surveys we have conducted are based on a small number of respondents and are not statistically significant and may have other limitations. The actual incidence of lower back pain, and the actual demand for our product or competitive products, could differ materially from our projections if our assumptions and estimates are incorrect. As a result, our estimates of the size and future growth in the market for our product may prove to be incorrect. In addition, actual health cost savings to the healthcare system as a result of the Catamaran System procedure may materially differ from those presented in this report. If the actual number of people with lower back pain who would benefit from the Catamaran System and the size and future growth in the market and related costs savings to the healthcare system is smaller than we have estimated, it may impair our projected sales growth and have an adverse impact on our business.

In the future our product may become obsolete, which would negatively affect operations and financial condition.

The medical device industry is characterized by rapid and significant change. There can be no assurance that other companies will not succeed in developing or marketing devices, and products that are more effective than the Catamaran System or that would render the Catamaran System obsolete or non-competitive. Additionally, new surgical procedures, medications and other therapies could be developed that replace or reduce the importance of our product. Accordingly, our success will depend in part on our ability to respond quickly to medical and changes through the development and introduction of new products. Product development involves a high degree of risk and there can be no assurance that our new product development efforts will result in any commercially successful products.

If we experience significant disruptions in our information technology systems, our business, results of operations, and financial condition could be adversely affected.

The efficient operation of our business depends on our information technology systems. We will rely on our information technology systems to effectively manage:

Our information technology systems are vulnerable to damage or interruption from:

The failure of our information technology systems to perform as we anticipate or our failure to effectively implement new systems could disrupt our entire operation and could result in decreased sales, increased overhead costs, excess inventory and product shortages, and legal liability issues, all of which could have a material adverse effect on our reputation, business, results of operations, and financial condition.

We may seek to grow our business through acquisitions of or investments in new or complementary businesses, products or technologies, and the failure to manage acquisitions or investments, or the failure to integrate them with our existing business, could have a material adverse effect on us.

From time to time, we expect to consider opportunities to acquire or make investments in other technologies, products, and businesses that may enhance our capabilities, complement our current product, or expand the breadth of our markets or customer base. Potential and completed acquisitions and strategic investments involve numerous risks, including:

We have no current commitments with respect to any acquisition or investment. We do not know if we will be able to identify acquisitions, we deem suitable, whether we will be able to successfully complete any such acquisitions on favorable terms or at all, or whether we will be able to successfully integrate any acquired business, product, or technology into our business or retain any key personnel, suppliers, or distributors. Our ability to successfully grow through acquisitions depends upon our ability to identify, negotiate, complete, and integrate suitable target businesses and to obtain any necessary financing. These efforts could be expensive and time consuming and may disrupt our ongoing business and prevent management from focusing on our operations. If we are unable to successfully integrate any acquired businesses, products, or technologies effectively, our business, results of operations, and financial condition will be materially adversely affected.

We may enter into collaborations, in-licensing arrangements, joint ventures, strategic alliances, or partnerships with third-parties that may not result in the development of commercially viable products or the generation of significant future revenue.

In the ordinary course of our business, we may enter into collaborations, in-licensing arrangements, joint ventures, strategic alliances, partnerships, or other arrangements to develop products and to pursue new markets. We have not entered into any collaboration arrangements to date. Proposing, negotiating, and implementing collaborations, in-licensing arrangements, joint ventures, strategic alliances, or partnerships may be a lengthy and complex process. Other companies, including those with substantially greater financial, marketing, sales, technology, or other business resources, may compete with us for these opportunities or arrangements. We may not identify, secure, or complete any such transactions or arrangements in a timely manner, on a cost-effective basis, on acceptable terms or at all. We have limited institutional knowledge and experience with respect to these business development activities, and we may also not realize the anticipated benefits of any such transaction or arrangement. These collaborations may not result in the development of products that achieve commercial success or result in significant revenue and could be terminated prior to developing any products.

Additionally, we may not be able to exercise sole decision-making authority regarding the transaction or arrangement, which could create the potential risk of creating impasses on decisions, and our future collaborators may have economic or business interests or goals that are, or that may become, inconsistent with our business interests or goals. It is possible that conflicts may arise with our collaborators, such as conflicts concerning the achievement of performance milestones, or the interpretation of significant terms under any agreement, such as those related to financial obligations or the ownership or control of intellectual property developed during the collaboration. If any conflicts arise with any future collaborators, they may act in their self- interest, which may be adverse to our best interest, and they may breach their obligations to us. In addition, we may have limited control over the amount and timing of resources that any future collaborators devote to our or their future products.

Disputes between us and our collaborators may result in litigation or arbitration which would increase our expenses and divert the attention of our management. Further, these transactions and arrangements will be contractual in nature and will generally be terminable under the terms of the applicable agreements and, in such event, we may not continue to have rights to the products relating to such transaction or arrangement or may need to purchase such rights at a premium. If we enter into in-bound intellectual property license agreements, we may not be able to fully protect the licensed intellectual property rights or maintain those licenses. Future licensors could retain the right to prosecute and defend the intellectual property rights licensed to us, in which case we would depend on the ability of our licensors to obtain, maintain and enforce intellectual property protection for the licensed intellectual property. These licensors may determine not to pursue litigation against other companies or may pursue such litigation less aggressively than we would. Further, entering into such license agreements could impose various diligence, commercialization, royalty, or other obligations on us. Future licensors may allege that we have breached our license agreement with them, and accordingly seek to terminate our license, which could adversely affect our competitive business position and harm our business prospects.

We are increasingly dependent on information technology, and our systems and infrastructure face certain risks, including cybersecurity and data leakage risks.

Significant disruptions to our information technology systems or breaches of information security could adversely affect our business. In the ordinary course of business, we will collect, store and transmit large amounts of confidential information, and it is critical that we do so in a secure manner to maintain the confidentiality and integrity of such information. We have also outsourced significant elements of our information technology infrastructure; as a result, we manage independent vendor relationships with third parties who are responsible for maintaining significant elements of our information technology systems and infrastructure and who may or could have access to our confidential information. The size and complexity of our information technology systems, and those of our third-party vendors, make such systems potentially vulnerable to service interruptions and security breaches from inadvertent or intentional actions by our employees, partners or vendors. These systems are also vulnerable to attacks by malicious third parties and may be susceptible to intentional or accidental physical damage to the infrastructure maintained by us or by third parties. Maintaining the secrecy of confidential, proprietary and/or trade secret information is important to our competitive business position. While we have taken steps to protect such information and have invested in systems and infrastructures to do so, there can be no guarantee that our efforts will prevent service interruptions or security breaches in our systems or the unauthorized or inadvertent wrongful use or disclosure of confidential information that could adversely affect our business operations or result in the loss, dissemination or misuse of critical or sensitive information. The increasing sophistication and frequency of cybersecurity threats, including targeted data breaches, ransomware attacks designed to encrypt our data for ransom and other malicious cyber activities, pose a significant risk to the integrity and confidentiality of our data systems. A breach our security measures or the accidental loss, inadvertent disclosure, unapproved dissemination, misappropriation or misuse of trade secrets, proprietary information or other confidential information, whether as a result of theft, hacking, fraud, trickery or other forms of deception, or for any other cause, could enable others to produce competing products, use our proprietary technology or information, and/or adversely affect our business position. Further, any such interruption, security breach, loss or disclosure of confidential information could result in financial, legal, business and reputational harm to us and could have a material adverse effect on our business, financial position, results of operations and/or cash flow.

Geopolitical conditions, including trade disputes and direct or indirect acts of war or terrorism, could have an adverse effect on our operations and financial results.

Our operations could be disrupted by geopolitical conditions, political and social instability, acts of war, terrorist activity or other similar events. In February 2022, Russia initiated significant military action against Ukraine. In response, the U.S. and certain other countries imposed significant sanctions and export controls against Russia, Belarus and certain individuals and entities connected to Russian or Belarusian political, business, and financial organizations, and the U.S. and certain other countries could impose further sanctions, trade restrictions, and other retaliatory actions should the conflict continue or worsen. It is not possible to predict the broader consequences of the conflict, including related geopolitical tensions, and the measures and retaliatory actions taken by the U.S. and other countries in respect thereof as well as any counter measures or retaliatory actions by Russia or Belarus in response, including, for example, potential cyberattacks or the disruption of energy exports, is likely to cause regional instability, geopolitical shifts, and could materially adversely affect global trade, currency exchange rates, regional economies and the global economy. In addition, the ongoing conflicts in the Middle East may further impact global economic conditions and market sentiments. This, in turn, could adversely affect the trading price of our shares of common stock and investor interest in us. The outcome of the Russia-Ukraine war and conflicts in the Middle East remain uncertain, and while it is difficult to predict the impact of any of the foregoing, the conflict and actions taken in response to the conflict could increase our costs, disrupt our supply chain, reduce our sales and earnings, impair our ability to raise additional capital when needed on acceptable terms, if at all, or otherwise adversely affect our business, financial condition, and results of operations.

Inflation may adversely affect our operations and financial results.

In periods of rising inflation, the cost of raw materials, components and labor essential for manufacturing the Catamaran System may increase and as a consequence, our overall profit margin may be adversely affected. In addition, inflation may result in limitations on healthcare spending, specifically for procedures that are deemed elective or non-critical, which may include treatments utilizing the Catamaran System. A decrease in demand for these procedures may significantly impact our financial condition and results of operations.

The failure of Silicon Valley Bank could cause us to lose our deposits in excess of the federally insured bank deposit limitation.

On March 10, 2023, the Federal Deposit Insurance Corporation (the “FDIC”) took control of Silicon Valley Bank (“SVB”) and created the National Bank of Santa Clara to hold the deposits of SVB after SVB was unable to continue their operations. SVB’s deposits are insured by the FDIC in amount up to $250,000 for any depositor and any deposit in excess of this insured amount could be lost. As of March 10, 2023, we had approximately $585,000 on deposit with SVB, of which approximately $335,000 will not be insured by the FDIC (the “Uninsured Amount”). We expect to have access to the insured portion of our SVB deposit in the coming days, but do not know when, if ever, we will have access to the Uninsured Amount. The loss of all or a significant portion of the Uninsured Amount would not have an adverse effect on our ability to pay our operational expenses or make other payments, but may require the Company to move our accounts to another bank which could cause a temporary delay in making payments to our vendors and employees and cause other operational inconveniences.

Risks Related to Our Legal and Regulatory Environment

We and our contract manufacturers are subject to extensive governmental regulation both in the United States and abroad, and failure to comply with applicable requirements could cause our business to suffer.

The medical device industry is regulated extensively by governmental authorities, principally the FDA and corresponding state and foreign regulatory agencies. The FDA and other U.S. and foreign governmental agencies regulate, among other things, with respect to medical devices:

The regulations to which we are subject are complex and have tended to become more stringent over time. Regulatory changes could result in restrictions on our ability to carry on or expand our operations, difficulties achieving new product clearances, higher than anticipated costs or lower than anticipated sales.

Before we can market or sell a new regulated product or make a significant modification to an existing product in the United States, with very limited exception, we must obtain either clearance under Section 510(k) of the FDCA for Class II devices or approval of a premarket approval application from the FDA for a Class III device. In the 510(k) clearance process, the FDA must determine that a proposed device is “substantially equivalent” to a device legally on the market, known as a “predicate” device, with respect to intended use, technology, and safety and effectiveness, in order to clear the proposed device for marketing. Clinical data is sometimes required to support substantial equivalence. The PMA pathway requires an applicant to demonstrate the safety and effectiveness of the device based, in part, on extensive data, including, but not limited to, technical, preclinical, clinical trial, manufacturing, and labeling data. The PMA process is typically required for devices that are deemed to pose the greatest risk, such as life-sustaining, life-supporting, or implantable devices. Products that are approved through a PMA application generally need FDA approval before they can be modified. Similarly, some modifications made to products cleared through a 510(k) may require a new 510(k). Both the 510(k) and PMA processes can be expensive and lengthy and require the payment of significant fees, unless exempt. The FDA’s 510(k) clearance process usually takes from three to 12 months but may last longer. The process of obtaining a PMA is much more costly and uncertain than the 510(k) clearance process and generally takes from one to three years, or even longer, from the time the application is submitted to the FDA until an approval is obtained. The process of obtaining domestic and international regulatory clearances or approvals to market a medical device can be costly and time consuming, and we may not be able to obtain these clearances or approvals on a timely basis, if at all.

In the United States, all of the components to the Catamaran System have either received premarket clearance under Section 510(k) of the FDCA or are exempt from premarket review. If the FDA requires us to go through a lengthier, more rigorous examination for future products or modifications to existing products than we had expected, our product introductions or modifications could be delayed or canceled, which could cause our sales to decline. In addition, the FDA may determine that future products will require the more costly, lengthy, and uncertain PMA process. Although we do not currently market any devices under PMA, the FDA may demand that we obtain a PMA prior to marketing certain of our future products. In addition, if the FDA disagrees with our determination that a product, we currently market is subject to an exemption from premarket review, the FDA may require us to submit a 510(k) or PMA in order to continue marketing the product. Further, even with respect to those future products where a PMA is not required, we cannot assure you that we will be able to obtain the 510(k) clearances with respect to those products.

The FDA can delay, limit or deny clearance or approval of a device for many reasons, including:

In addition, the FDA may change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions which may prevent or delay clearance or approval of our product under development or impact our ability to modify our currently approved or cleared product on a timely basis.

Any delay in, or failure to receive or maintain, clearance or approval for our product under development could prevent us from generating revenue from these products or achieving profitability.

In addition, even after we have obtained the proper regulatory clearance or approval to market a product, the FDA has the power to require us to conduct post-market surveillance on our product. These studies can be very expensive and time consuming to conduct. Failure to comply with those studies in a timely manner could result in the revocation of the 510(k) clearance for a product that is subject to such surveillance and the recall or withdrawal of the product, which could prevent us from generating sales from that product in the United States.

Additionally, as part of the conformity assessment process, medical device manufacturers must carry out a clinical evaluation of their medical devices to verify that they comply with the relevant Essential Requirements covering safety and performance. A clinical evaluation includes an assessment of whether a medical device’s performance is in accordance with its intended use and that the known and foreseeable risks linked to the use of the device under normal conditions are minimized and acceptable when weighed against the benefits of its intended purpose. The clinical evaluation conducted by the manufacturer must also address any clinical claims, the adequacy of the device labeling and information (particularly claims, contraindications, precautions/ warnings) and the suitability of related Instructions for Use. This assessment must be based on clinical data, which can be obtained from (i) clinical studies conducted on the devices being assessed; (ii) scientific literature from similar devices whose equivalence with the assessed device can be demonstrated; or (iii) both clinical studies and scientific literature.

The FDA and other regulatory authorities have broad enforcement powers. Regulatory enforcement or inquiries, or other increased scrutiny on us, could dissuade some clinicians from using our product and adversely affect our reputation and the perceived safety and effectiveness of our product.

Failure to comply with applicable regulations could jeopardize our ability to sell our product and result in enforcement actions such as:

Adverse action by an applicable regulatory agency the FDA could result in inability to produce our product in a cost-effective and timely manner, or at all, decreased sales, higher prices, lower margins, additional unplanned costs or actions, damage to our reputation, and could have material adverse effect on our reputation, business, results of operations, and financial condition.

We and our independent sales representatives must comply with U.S. federal and state fraud and abuse laws, including those relating to physician kickbacks and false claims for reimbursement.

Healthcare providers, distributors, physicians, and third-party payors play a primary role in the distribution, recommendation, ordering, and purchasing of any implant or other medical device for which we have or obtain marketing clearance or approval. Through our arrangements with customers and third-party payors, we are exposed to the risk that our employees, independent contractors, principal investigators, consultants, vendors, or independent sales representatives may engage in fraudulent or other illegal activity. Misconduct by these parties could include, among other infractions or violations, intentional, reckless and/or negligent conduct or unauthorized activity that violates FDA regulations, manufacturing standards, federal and state healthcare fraud and abuse laws and regulations, laws that require the true, complete, and accurate reporting of financial information or data, other commercial or regulatory laws or requirements, and equivalent foreign rules. We plan to implement a compliance program, code of conduct, and associated policies and procedures, but it is not always possible to identify and deter misconduct by our employees and other third parties, and the precautions we plan to take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations, and government authorities may conclude that our business practices do not comply with applicable fraud and abuse or other healthcare laws and regulations or guidance despite our good faith efforts to comply.

There are numerous U.S. federal and state laws pertaining to healthcare fraud and abuse, including anti-kickback and false claims laws. Our relationships with clinicians, other healthcare professionals, and hospitals are subject to scrutiny under these laws.

Healthcare fraud and abuse laws and related regulations are complex, and even minor irregularities can potentially give rise to claims that a statute or prohibition has been violated. The laws that may affect our ability to operate include:

If we or our employees are found to have violated any of the above laws we may be subjected to administrative, civil and criminal penalties, including imprisonment, exclusion from participation in federal healthcare programs, such as Medicare and Medicaid, and significant fines, monetary penalties and damages, and damage to our reputation. Additional information about these laws is provided in “Business—Regulation.”

We have entered into consulting agreements with clinicians who are also customers. We anticipate entering into additional agreements with clinicians who use our product as we continue to commercialize our product. The primary mission of these clinician advisors is research and development and clinician education. Medical device technology development requires thoughtful clinician input from experienced healthcare professionals. Medical device clinician education requires experienced faculty for didactic and anatomic lab activities in a peer-to-peer setting. We believe these engagements will allow us to successfully meet the expectations of the physician community. In addition, a small number of clinicians (which are or may become customers) own less than 1.0% of our stock, or were granted stock options which they either purchased in an arm’s length transaction on terms identical to those offered to others or received from us as fair market value consideration for consulting services performed. While all of these transactions were structured with the intention of complying with all applicable laws, including the federal Anti-Kickback Statute, state anti-kickback laws and other applicable laws, to the extent applicable, it is possible that regulatory agencies may view these transactions as prohibited arrangements that must be restructured, or discontinued, or for which we could be subject to significant penalties. We would be materially and adversely affected if regulatory agencies interpret our financial relationships with clinicians who order our product to be in violation of applicable laws and we were unable to comply with such laws, which could subject us to, among other things, monetary penalties for non-compliance, the cost of which could be substantial.

In certain cases, federal and state authorities pursue actions for false claims on the basis that manufacturers and distributors are promoting unapproved, or “off-label” uses of their products. Pursuant to FDA regulations, we can only market our product for cleared or approved uses. Although clinicians are permitted to use medical devices for indications other than those cleared or approved by the FDA, we are prohibited from promoting products for “off-label” uses. We market our product and provide promotional materials and training programs to clinicians regarding the use of our product. If it is determined that our marketing, promotional materials or training programs constitute promotion of unapproved uses, we could be subject to significant fines in addition to regulatory enforcement actions, including the issuance of a warning letter, injunction, seizure, criminal penalty, and damage to our reputation. Federal and state authorities also pursue actions for false claims based upon improper billing and coding advice or recommendations, as well as decisions related to the medical necessity of procedures, including the site-of-service where procedures are performed. Actions under the federal False Claims Act may also be brought by whistleblowers under its qui tam provisions.

To enforce compliance with the federal laws, the U.S. Department of Justice has increased its scrutiny of interactions between healthcare companies and healthcare providers, which has led to a number of investigations, prosecutions, convictions and settlements in the healthcare industry. Dealing with investigations can be time and resource consuming and can divert management’s attention from the business. Additionally, if a healthcare company settles an investigation with the Department of Justice or other law enforcement agencies, it may need to agree to additional onerous compliance and reporting requirements as part of a consent decree or corporate integrity agreement. Any such investigation or settlement could increase our costs or otherwise have an adverse effect on our business. Even if we are not determined to have violated these laws, government investigations into these issues typically require the expenditure of significant resources and generate negative publicity, which could harm our financial condition and divert resources and the attention of our management from operating our business.

The scope and enforcement of these laws is uncertain and subject to rapid change. The shifting compliance environment and the need to build and maintain robust and expandable systems to comply with different compliance and/or reporting requirements in multiple jurisdictions increase the possibility that we may run afoul of one or more of the requirements or that federal or state regulatory authorities might challenge our current or future activities under these laws. Additionally, we cannot predict the impact of any changes in these laws, whether or not retroactive.

Our failure to adequately protect personal information in compliance with evolving legal requirements could harm our business.

In the ordinary course of our business, we plan to collect and store sensitive data, including legally protected personally identifiable information. We may collect this kind of information during the course of future clinical trials and for possible post-marketing safety vigilance, helping enable clinicians and their patients to pursue claims for reimbursement for procedures using the Catamaran System and servicing potential warranty claims.

There are a number of state, federal, and international laws protecting the privacy and security of health information and personal data. These data protection and privacy-related laws and regulations are evolving and may result in ever-increasing regulatory and public scrutiny of companies’ data practices and escalating levels of enforcement and sanctions. As part of the American Recovery and Reinvestment Act 2009, or ARRA, Congress amended the privacy and security provisions of the Health Insurance Portability and Accountability Act, or HIPAA. HIPAA imposes certain requirements regarding the privacy, security, use, and disclosure of an individual’s protected health information, or PHI, by certain health care providers, health care clearinghouses, and health insurance plans, collectively referred to as “covered entities,” and their “business associates,” or subcontractors who provide services to covered entities that involve the creation, use, maintenance, or disclosure of PHI. ARRA included significant increases in the penalties for improper use or disclosure of an individual’s PHI under HIPAA and extended enforcement authority to state attorneys general. The amendments also created notification requirements applicable to covered entities and business associates in certain cases when PHI in their control has been inappropriately accessed or disclosed. In the case of a breach of unsecured PHI, covered entities may be required to provide notification to individuals affected by the breach, federal regulators, and, in some cases, local and national media. In addition to HIPAA, most states have laws requiring notification of affected individuals and state regulators in the event of a breach of “personal information,” which is a broader class of information than the PHI protected by HIPAA. Certain states also have data privacy requirements applicable to individually identifiable health information. Privacy laws in different states may contain different requirements, and such laws may not be pre-empted by HIPAA, which could complicate our efforts to comply.

In addition, even when HIPAA does not apply, according to the FTC, failing to take appropriate steps to keep consumers’ personal information secure constitutes unfair acts or practices in or affecting commerce in violation of Section 5(a) of the FTCA, 15 U.S.C § 45(a). The FTC expects a company’s data security measures to be reasonable and appropriate in light of the sensitivity and volume of consumer information it holds, the size and complexity of its business, and the cost of available tools to improve security and reduce vulnerabilities. Medical data is considered sensitive data that merits stronger safeguards. The FTC’s guidance for appropriately securing consumers’ personal information is similar to what is required by the HIPAA Security Rule.

Our failure to comply with applicable laws and regulations, or to protect such data, could result in enforcement actions against us, including fines, imprisonment of company officials and public censure, claims for damages by end-customers, and other affected individuals, and the imposition of integrity obligations and agency oversight, damage to our reputation, and loss of goodwill, any of which could harm on our operations, financial performance, and business. Evolving and changing definitions of personal data and personal information, within the United States, and elsewhere, may limit or inhibit our ability to operate or expand our business, including limiting strategic partnerships that may involve the sharing of data. Moreover, if the relevant laws and regulations change, or are interpreted and applied in a manner that is inconsistent with our data practices or the operation of our product, or if we expand into new regions and are required to comply with new requirements, we may need to expend resources in order to change our business operations, data practices, or the manner in which our product operates. Even the perception of privacy concerns, whether or not valid, may harm our reputation and inhibit adoption of our product.

Even if our product is approved by regulatory authorities if our contract manufacturers fail to comply with ongoing FDA, or if we experience unanticipated problems with our products, these products could be subject to restrictions or withdrawal from the market.

Any product for which we obtain regulatory clearance or approval, and the manufacturing processes, reporting requirements, post-approval clinical data, and promotional activities for such product, will be subject to continued regulatory review, oversight and periodic inspections by the FDA and other domestic bodies. In particular, we and our contract manufacturers are required to comply with FDA’s Quality System Regulations (“QSR”) for the manufacture of our product and other regulations which cover the methods and documentation of the design, testing, production, control, quality assurance, labeling, packaging, storage, and shipping of any product for which we obtain regulatory clearance or approval.

The failure by us or one of our contract manufacturers to comply with applicable statutes and regulations, or the failure to timely and adequately respond to any adverse inspectional observations or product safety issues, could result in, among other things, any of the following enforcement actions:

In addition, we may be required to conduct costly post-market testing and surveillance to monitor the safety or effectiveness of our product, and we must comply with medical device reporting requirements, including the reporting of adverse events and malfunctions related to our product. Later discovery of previously unknown problems with our product, including unanticipated adverse events or adverse events of unanticipated severity or frequency, manufacturing problems, or failure to comply with regulatory requirements such as QSR, may result in changes to labeling, restrictions on such products or manufacturing processes, withdrawal of the products from the market, voluntary or mandatory recalls, a requirement to repair, replace, or refund the cost of any medical device we manufacture or distribute, fines, suspension, variation, or withdrawal of regulatory approvals product seizures, injunctions, or the imposition of civil, administrative, or criminal penalties which would adversely affect our business, operating results, and prospects.

If the FDA determines that our promotional materials, labeling, training or other marketing or educational activities constitute promotion of an unapproved use, it could request that we cease or modify our training or promotional materials or subject us to regulatory enforcement actions. It is also possible that other federal, state or foreign enforcement authorities might take action if they consider our training or other promotional materials to constitute promotion of an unapproved use, which could result in significant fines or penalties under other statutory authorities, such as laws prohibiting false or fraudulent claims for payment of government funds.

If any of these actions were to occur it would harm our reputation and cause our product sales and profitability to suffer and may prevent us from generating revenue. Furthermore, our key component suppliers may not currently be or may not continue to be in compliance with all applicable regulatory requirements, which could result in our failure to produce our product on a timely basis and in the required quantities, if at all.

The FDA has not yet inspected our facility, but we expect an inspection in the future.

Our employees, independent contractors, consultants, contract manufacturers, and our independent sales representatives may engage in misconduct or other improper activities, relating to regulatory standards and requirements.

We are exposed to the risk that our employees, independent contractors, consultants, contract manufacturers, and our independent sales representatives may engage in fraudulent conduct or other illegal activity. Misconduct by these parties could include intentional, reckless and/or negligent conduct or disclosure of unauthorized activities to us that violates FDA regulations, including those laws requiring the reporting of true, complete and accurate information to the FDA, manufacturing standards, federal and state healthcare laws and regulations, and laws that require the true, complete and accurate reporting of financial information or data. These laws and regulations may restrict or prohibit a wide range of pricing, discounting, marketing and promotion, sales commission, customer incentive programs, and other business arrangements. Misconduct by these parties could also involve the improper use of individually identifiable information, including, without limitation, information obtained in the course of clinical trials, which could result in regulatory sanctions and serious harm to our reputation. We plan to implement a compliance program, code of conduct and associated policies and procedures, but it is not always possible to identify and deter misconduct, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our business, including the imposition of significant civil, criminal, and administrative penalties, including, without limitation, damages, fines, disgorgement of profits, imprisonment, exclusion from participation in government healthcare programs, such as Medicare and Medicaid, and the curtailment or restructuring of our operations.

We may be subject to enforcement action, including fines, penalties or injunctions, if we are determined to be engaging in the off-label promotion of our product.

Our promotional materials and training methods must comply with FDA and other applicable laws and regulations, including the prohibition of the promotion of off-label use. Physicians may use our product off-label, as the FDA does not restrict or regulate a physician’s choice of treatment within the practice of medicine. In the United States, the full indication for the Catamaran System is: “The Tenon Catamaran Sacroiliac Joint Fixation System (CAT SIJ Fixation System) is intended for sacroiliac joint fusion for conditions including sacroiliac joint disruptions and degenerative sacroiliitis.” Contraindications are patients with the following conditions: skeletally immature spines; deformities; severe osteoporosis; morbid obesity, tumor resection and active infection at treatment site.

We believe that the specific surgical procedures for which our product are marketed fall within the scope of the surgical applications that have been cleared by the FDA. However, if the FDA determines that our promotional materials or training constitutes promotion of an off-label use, it could request that we modify our training or promotional materials, require us to stop promoting our product for those specific procedures until we obtain FDA clearance or approval for them, or subject us to regulatory or enforcement actions, including the issuance of an untitled letter, a warning letter, injunction, seizure, civil fines, and criminal penalties. It is also possible that other federal, state or foreign enforcement authorities might take action if they consider our promotional or training materials to constitute promotion of an unapproved use, which could result in significant fines or penalties under other statutory authorities, such as laws prohibiting false or fraudulent claims for payment of government fund. In that event, our reputation could be damaged, and adoption of the product would be impaired. Although our policy is to refrain from statements that could be considered off-label promotion of our product, the FDA or another regulatory agency could disagree and conclude that we have engaged in off-label promotion. In addition, the off-label use of our product may increase the risk of injury to patients, and, in turn, the risk of product liability claims. Product liability claims are expensive to defend and could divert our management’s attention, result in substantial damage awards against us and harm our reputation.

We are required to report certain malfunctions, deaths, and serious injuries associated with our product, which can result in voluntary corrective actions or agency enforcement actions.

Further, under the FDA’s medical device reporting regulations, we are required to report to the FDA any information that our product may have caused or contributed to a death or serious injury or in which our product malfunctioned and, if the malfunction were to recur, would likely cause or contribute to death or serious injury. If we fail to report these events to the FDA within the required timeframes, or at all, FDA could take enforcement action against us. Any such adverse event involving our product or repeated product malfunctions may result in a voluntary or involuntary corrective actions, such as recalls or customer notifications, or agency action, such as inspection or enforcement action. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit could divert managerial and financial resources, impair our ability to manufacture our product in a cost-effective and timely manner, and have an adverse effect on our reputation, results of operations, and financial condition.

Any adverse event involving our product in the United States could result in future voluntary corrective actions, such as recalls, including corrections, or customer notifications, or agency action, such as inspection or enforcement actions. If malfunctions do occur, we may be unable to correct the malfunctions adequately or prevent further malfunctions, in which case we may need to cease manufacture and distribution of the affected products, initiate voluntary recalls, and redesign the products. Regulatory authorities may also take actions against us, such as ordering recalls, imposing fines, or seizing the affected products. Any corrective action, whether voluntary or involuntary, will require the dedication of our time and capital, distract management from operating our business, and may harm our reputation and financial results.

A recall of our product, either voluntarily or at the direction of the FDA or the discovery of serious safety issues or malfunctions with our product, can result in voluntary corrective actions or agency enforcement actions, which could have a significant adverse impact on us.

The FDA has the authority to require the recall of commercialized products in the event of material deficiencies or defects in design or manufacture or in the event that a product poses an unacceptable risk to health. Manufacturers may, under their own initiative, recall a product if any material deficiency in a device is found.

In the case of the FDA, the authority to require a recall must be based on an FDA finding that there is an unreasonable risk of substantial public harm. In addition, foreign governmental bodies have the authority to require the recall of our product in the event of material deficiencies or defects in design or manufacture. A government-mandated or voluntary recall by us or one of the independent sales representatives could occur as a result of an unacceptable risk to health, component failures, manufacturing errors, design or labeling defects, or other deficiencies and issues. Recalls of any of our product would divert managerial and financial resources and have an adverse effect on our reputation, results of operations, and financial condition, which could impair our ability to produce our product in a cost-effective and timely manner in order to meet our customers’ demands. We may also be required to bear other costs or take other actions that may have a negative impact on our future sales and our ability to generate profits.

The FDA requires that certain classifications of recalls be reported to FDA within 10 working days after the recall is initiated. Companies are required to maintain certain records of recalls, even if they are not reportable to the FDA. We may initiate voluntary recalls involving our product in the future that we determine do not require notification of the FDA. If the FDA disagrees with our determinations, they could require us to report those actions as recalls. A future recall announcement could harm our reputation with customers and negatively affect our sales. In addition, the FDA could take enforcement action for failing to report the recalls when they were conducted.

Modifications to our product may require new 510(k) clearances or premarket approvals may require us to cease marketing or recall the product until clearances

Any modification to a 510(k)-cleared device that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, design, or manufacture, requires a new 510(k) clearance or, possibly, a PMA. The FDA requires every manufacturer make and document this determination in the first instance. A manufacturer may determine that a modification could not significantly affect safety or effectiveness and does not represent a major change in its intended use, so that no new 510(k) clearance is necessary. FDA may review any manufacturer’s decision and may not agree with our decisions regarding whether new clearances or approvals are necessary. The FDA may also on its own initiative determine that a new clearance or approval is required.

We have modified our product and have determined based on our review of the applicable FDA guidance that a new 510(k) clearances or PMAs is not required. If the FDA disagrees with our determination and requires us to submit new 510(k) clearances or PMAs for modifications to our previously cleared products for which we have concluded that new clearances or approvals are unnecessary, we may be required to cease marketing or to recall the modified product until we obtain clearance or approval, and we may be subject to significant enforcement action, regulatory fines, or penalties.

If a manufacturer determines that a modification to an FDA-cleared device could significantly affect its safety or effectiveness or would constitute a major change in its intended use, then the manufacturer must file for a new 510(k) clearance or possibly a premarket approval application. Where we determine that modifications to our product require a new 510(k) clearance or premarket approval application, we may not be able to obtain those additional clearances or approvals for the modifications or additional indications in a timely manner, or at all. FDA’s ongoing review of the 510(k) programs may make it more difficult for us to make modifications to our previously cleared products, either by imposing more strict requirements on when a new 510(k) for a modification to a previously cleared product must be submitted or applying more onerous review criteria to such submissions.

Clinical trials necessary to support a 510(k) or reimbursement may require the enrollment of large numbers of patients, and suitable patients may be difficult to identify and recruit. Delays or failures in our clinical trials could affect third party reimbursement as many of the payors want to see peer reviewed articles to maintain coverage and lack of changes in reimbursement could materially slow down our commercial efforts and affect our revenue projections.

The results of our clinical trials may not support our product candidate claims or may result in the discovery of adverse side effects.

If our clinical trials are completed as planned, we cannot be certain that their results will support our product marketing claims or third party reimbursors will agree with our conclusions regarding them. The clinical trial process may fail to demonstrate efficacy and cost effectiveness of our product and may hinder the adoption of our product or ability to obtain payor coverage. It is also possible that patients enrolled in clinical trials will experience adverse side effects that are not currently part of the product candidate’s profile.

We may incur product liability losses, and insurance coverage may be inadequate or unavailable to cover these losses.

Our business exposes us to potential product liability claims that are inherent in the testing, design, manufacture, and sale of medical devices for SI-Joint surgery procedures. SI-Joint surgery involves significant risk of serious complications, including bleeding, nerve injury, paralysis, and even death. In addition, if longer-term patient results and experience indicates that our product or any component of such product cause tissue damage, motor impairment, or other adverse effects, we could be subject to significant liability. Clinicians may misuse or ineffectively use our product, which may result in unsatisfactory patient outcomes or patient injury. We could become the subject of product liability lawsuits alleging that component failures, manufacturing flaws, design defects, or inadequate disclosure of product-related risks or product-related information resulted in an unsafe condition or injury to patients. Product liability lawsuits and claims, safety alerts, or product recalls, regardless of their ultimate outcome, could have a material adverse effect on our business and reputation, our ability to attract and retain customers and our results of operations or financial condition.

Although we maintain third-party product liability insurance coverage, it is possible that claims against us may exceed the coverage limits of our insurance policies or cause us to record a self-insured loss. Even if any product liability loss is covered by an insurance policy, these policies typically have substantial retentions or deductibles that we are responsible for. Product liability claims in excess of applicable insurance coverage could have a material adverse effect on our business, results of operations, and financial condition.

In addition, any product liability claim brought against us, with or without merit, could result in an increase of our product liability insurance rates. Insurance coverage varies in cost and can be difficult to obtain, and we cannot guarantee that we will be able to obtain insurance coverage in the future on terms acceptable to us or at all.

We are subject to environmental laws and regulations that can impose significant costs and expose us to potential financial liabilities.

Our business and facility and those of our contract manufacturer are subject to foreign, federal, state, and local laws and regulations relating to the protection of human health and the environment, including those governing the use, manufacture, storage, handling, and disposal of, and exposure to, such materials and wastes. In addition, under some environmental laws and regulations, we could be held responsible for costs relating to any contamination at our past or present facilities and at third-party waste disposal sites even if such contamination was not caused by us. A failure to comply with current or future environmental laws and regulations could result in severe fines or penalties. Any such expenses or liability could have a significant negative impact on our business, results of operations, and financial condition.

U.S. tax legislation may materially affect our financial condition, results of operations and cash flows.

The Tax Cuts and Jobs Act (the “Tax Act”) has significantly changed the U.S. federal income taxation of U.S. businesses, including by reducing the U.S. corporate income tax rate, limiting interest deductions, permitting immediate expensing of certain capital expenditures, modifying or repealing many business deductions and credits.

The Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”) modifies certain provisions of the Tax Act, including increasing the amount of interest expense that may be deducted.

The Tax Act as modified by the CARES Act is unclear in many respects and could be subject to potential amendments and technical corrections, as well as interpretations and implementing regulations by the Treasury and IRS, any of which could lessen or increase certain adverse impacts of the legislation. In addition, it is unclear how these U.S. federal income tax changes will affect state and local taxation, which often uses federal taxable income as a starting point for computing state and local tax liabilities. Our analysis and interpretation of this legislation is preliminary and ongoing and there may be material adverse effects resulting from the legislation that we have not yet identified. While some of the changes made by the tax legislation may adversely affect us, other changes may be beneficial. We continue to work with our tax advisors and auditors to determine the full impact that the recent tax legislation as a whole will have on us. We urge our investors to consult with their legal and tax advisors with respect to such legislation and its potential effect on an investment in our common stock.

Risks Related to Our Intellectual Property

Our ability to protect our intellectual property and proprietary technology is uncertain.

We rely primarily on patent, copyright, trademark and trade secret laws, as well as confidentiality and non- disclosure agreements and other methods, to protect our proprietary technologies and know-how. As of March 29, 2024, we owned eight issued patents (four domestic and four foreign), eighteen pending patent applications (sixteen domestic and two foreign), thirteen registered trademarks (seven domestic and six foreign) and twelve pending domestic trademark applications.

We have applied for patent protection relating to certain existing and proposed products and processes. While we generally apply for patents in those countries where we intend to make, have made, use, or sell patented products, we may not accurately predict all the countries where patent protection will ultimately be desirable. If we fail to timely file a patent application in any such country, we may be precluded from doing so later. Furthermore, we cannot assure you that any of our patent applications will be approved. The rights granted to us under our patents, including prospective rights sought in our pending patent applications, may not be meaningful or provide us with any commercial advantage. In addition, those rights could be opposed, contested, or circumvented by our competitors or be declared invalid or unenforceable in judicial or administrative proceedings. The failure of our patents to adequately protect our technology might make it easier for our competitors to offer the same or similar products or technologies. Competitors may be able to design around our patents or develop products that provide outcomes which are comparable to ours without infringing on our intellectual property rights. Due to differences between foreign and U.S. patent laws, our patented intellectual property rights may not receive the same degree of protection in foreign countries as they would in the United States. Even if patents are granted outside the United States, effective enforcement in those countries may not be available. Since most of our issued patents are for the United States only, we lack a corresponding scope of patent protection in other countries. In countries where we do not have significant patent protection, we may not be able to stop a competitor from marketing products in such countries that are the same as or similar to our product.

We plan to rely on our trademarks, trade names and brand names to distinguish our product from the products of our competitors and have registered or applied to register many of these trademarks. We cannot assure you that our trademark applications will be approved. Third parties may also oppose our trademark applications, or otherwise challenge our use of the trademarks. In the event that our trademarks are successfully challenged, we could be forced to rebrand our product, which could result in loss of brand recognition, and could require us to devote resources to advertising and marketing new brands. Further, we cannot assure you that competitors will not infringe upon our trademarks, or that we will have adequate resources to enforce our trademarks.

We also rely on trade secrets, know-how, and technology, which are not protected by patents, to maintain our competitive position. We try to protect this information by entering into confidentiality and intellectual property assignment agreements with parties that develop intellectual property for us and/or have access to it, such as our officers, employees, consultants, contract manufacturers and advisors. However, in the event of unauthorized use or disclosure or other breaches of such agreements, we may not be provided with meaningful protection for our trade secrets or other proprietary information. In addition, our trade secrets may otherwise become known or be independently discovered by competitors. To the extent that our commercial partners, collaborators, employees, and consultants use intellectual property owned by others in their work for us, disputes may arise as to the rights in related or resulting know-how and inventions. If any of our trade secrets, know-how or other technologies not protected by a patent were to be disclosed to or independently developed by a competitor, our business, financial condition, and results of operations could be materially adversely affected.

In the future, we may enter into licensing agreements to maintain our competitive position. If we enter into in-bound intellectual property license agreements, we may not be able to fully protect the licensed intellectual property rights or maintain those licenses. Future licensors could retain the right to prosecute and defend the intellectual property rights licensed to us, in which case we would depend on the ability of our licensors to obtain, maintain, and enforce intellectual property protection for the licensed intellectual property. These licensors may determine not to pursue litigation against other companies or may pursue such litigation less aggressively than we would. Further, entering into such license agreements could impose various diligence, commercialization, royalty, or other obligations on us. Future licensors may allege that we have breached our license agreement with them, and accordingly seek damages or to terminate our license, which could adversely affect our competitive business position and harm our business prospects.

If a competitor infringes upon one of our patents, trademarks, or other intellectual property rights, enforcing those patents, trademarks, and other rights may be difficult and time consuming. Even if successful, litigation to defend our patents and trademarks against challenges or to enforce our intellectual property rights could be expensive and time consuming and could divert management’s attention from managing our business. Moreover, we may not have sufficient resources to defend our patents or trademarks against challenges or to enforce our intellectual property rights. In addition, if third parties infringe any intellectual property that is not material to the products that we make, have made, use, or sell, it may be impractical for us to enforce this intellectual property against those third parties.

We may be subject to damages resulting from claims that we, our employees, or independent distributors along with their independent sales representatives have wrongfully used or disclosed alleged trade secrets of our competitors or are in breach of non-competition or non-solicitation agreements with our competitors.

Many of our employees were previously employed at other medical device companies, including our competitors or potential competitors, in some cases until recently. Some independent distributors and their independent sales representatives sell, or in the past have sold, products of our competitors. We may be subject to claims that we, our employees or independent sales personnel have inadvertently or otherwise used or disclosed trade secrets or other proprietary information of these former employers or competitors. In addition, we have been and may in the future be subject to claims that we caused an employee to breach the terms of his or her non-competition or non-solicitation agreement. Even if we are successful in defending against these claims, litigation could result in substantial costs, divert the attention of management from our core business and harm our reputation. If our defense to those claims fails, in addition to paying monetary damages, we may lose valuable intellectual property rights or personnel. There can be no assurance that this type of litigation will not continue, and any future litigation or the threat thereof may adversely affect our ability to hire additional direct sales representatives. A loss of key personnel or their work product could hamper or prevent our ability to commercialize product candidates, which could have an adverse effect on our business, results of operations, and financial condition.

The medical device industry is characterized by patent litigation, and we could become subject to litigation that could be costly, result in the diversion of management’s time and efforts, require us to pay damages, and/or prevent us from developing or marketing our existing or future products.

Our commercial success will depend in part on not infringing the patents or violating the other proprietary rights of third parties. Significant litigation regarding patent rights exists in our industry. Our competitors in both the United States and abroad, many of which have substantially greater resources and have made substantial investments in competing technologies, may have applied for or obtained or may in the future apply for and obtain, patents that will prevent, limit, or otherwise interfere with our ability to make and sell our product. We have conducted a limited review of patents issued to third parties. The large number of patents, the rapid rate of new patent issuances, the complexities of the technology involved, and the uncertainty of litigation increase the risk of business assets and management’s attention being diverted to patent litigation. Any litigation or claim against us, even those without merit, may cause us to incur substantial costs, and could place a significant strain on our financial resources, divert the attention of management from our core business, and harm our reputation. Further, as the number of participants in the medical device industry grows, the possibility of intellectual property infringement claims against us increases. If we are found to infringe the intellectual property rights of third parties, we could be required to pay substantial damages, including treble, or triple, damages if an infringement is found to be willful, and/or royalties and could be prevented from selling our product unless we obtain a license or are able to redesign our product to avoid infringement. Any such license may not be available on reasonable terms, if at all, and there can be no assurance that we would be able to redesign our product in a way that would not infringe the intellectual property rights of others. If we fail to obtain any required licenses or make any necessary changes to our product or technologies, we may have to withdraw our existing product from the market or may be unable to commercialize one or more of our future products, all of which could have a material adverse effect on our business, results of operations, and financial condition. If passed into law, patent reform legislation currently pending in the U.S. Congress could significantly change the risks associated with bringing or defending a patent infringement lawsuit. For example, fee shifting legislation could require a non-prevailing party to pay the attorney fees of the prevailing party in some circumstances.

Patent terms are limited, and we may not be able to effectively protect our product and business.

Patents have a limited lifespan. In the U.S., the natural expiration of a patent is generally 20 years after it is filed. Although various extensions may be available, the life of a patent, and the protection it affords, is limited. In addition, upon issuance in the U.S., the patent term may be extended based on certain delays caused by the applicant(s) or the USPTO. Even if we obtain effective patent rights for all our current patent applications, we may not have sufficient patent terms or regulatory exclusivity to protect our product, and our business and results of operations would be adversely affected.

Changes in U.S. patent law could diminish the value of patents in general, thereby impairing our ability to protect our product.

As is the case with other medical devices companies, our success is heavily dependent on intellectual property, particularly patents. Obtaining and enforcing patents in the medical devices industry involves both technological and legal complexity. Therefore, obtaining and enforcing patents is costly, time-consuming, and inherently uncertain. In addition, the U.S. has recently enacted and is currently implementing wide-ranging patent reform legislation. Recent U.S. Supreme Court rulings have narrowed the scope of patent protection available in certain circumstances and weakened the rights of patent owners in certain situations. In addition to increasing uncertainty with regard to our ability to obtain patents in the future, this combination of events has created uncertainty with respect to the value of patents, once obtained. Depending on future actions by the U.S. Congress, the federal courts and the USPTO, the laws and regulations governing patents could change in unpredictable ways that would weaken our ability to obtain new patents or to enforce our existing patents and patents that we might obtain in the future.

We may not be able to protect our intellectual property rights throughout the world.

Filing, prosecuting, and defending patents on product candidates in all countries throughout the world would be prohibitively expensive, and our intellectual property rights in some countries outside the U.S. can be less extensive than those in the U.S. In addition, the laws of some foreign countries do not protect intellectual property rights to the same extent as federal and state laws in the U.S. Competitors may use our technologies in jurisdictions where we have not obtained patent protection to develop their own products and may also export otherwise infringing products to territories where we have patent protection, but enforcement is not as strong as that in the U.S. These products may compete with our product and our patents or other intellectual property rights may not be effective or sufficient to prevent them from competing.

Many companies have encountered significant problems in protecting and defending intellectual property rights in foreign jurisdictions. The legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents, trade secrets and other intellectual property protection, particularly those relating to biotechnology products, which could make it difficult for us to stop the infringement of our patents or marketing of competing products in violation of our proprietary rights generally. Proceedings to enforce our patent rights in foreign jurisdictions, whether or not successful, could result in substantial costs and divert our efforts and attention from other aspects of our business, could put our patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not issuing and could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate, and the damages or other remedies awarded, if any, may not be commercially meaningful. Accordingly, our efforts to enforce our intellectual property rights around the world may be inadequate to obtain a significant commercial advantage from the intellectual property that we develop or license.

If we are unable to protect the confidentiality of our trade secrets, our business and competitive position could be harmed.

In addition to patent protection, we also rely upon copyright and trade secret protection, as well as non-disclosure agreements and invention assignment agreements with our employees, consultants, contract manufacturers and third parties, to protect our confidential and proprietary information. In addition to contractual measures, we try to protect the confidential nature of our proprietary information using commonly accepted physical and technological security measures. Such measures may not, for example, in the case of misappropriation of a trade secret by an employee or third party with authorized access, provide adequate protection for our proprietary information. Our security measures may not prevent an employee or consultant from misappropriating our trade secrets and providing them to a competitor, and recourse we take against such misconduct may not provide an adequate remedy to protect our interests fully. Unauthorized parties may also attempt to copy or reverse engineer certain aspects of our product that we consider proprietary. Enforcing a claim that a party illegally disclosed or misappropriated a trade secret can be difficult, expensive, and time-consuming, and the outcome is unpredictable. Even though we use commonly accepted security measures, trade secret violations are often a matter of state law, and the criteria for protection of trade secrets can vary among different jurisdictions. In addition, trade secrets may be independently developed by others in a manner that could prevent legal recourse by us. If any of our confidential or proprietary information, such as our trade secrets, were to be disclosed or misappropriated, or if any such information was independently developed by a competitor, our business and competitive position could be harmed.

Third parties may assert that our employees or consultants have wrongfully used or disclosed confidential information or misappropriated trade secrets.

We employ individuals who previously worked with other companies, including our competitors or potential competitors. Although we try to ensure that our employees and consultants do not use the proprietary information or know-how of others in their work for us, we may be subject to claims that we or our employees, consultants or independent contractors have inadvertently or otherwise used or disclosed intellectual property, including trade secrets or other proprietary information, of a former employer or other third party. Litigation may be necessary to defend against these claims. If we fail in defending any such claims or settling those claims, in addition to paying monetary damages or a settlement payment, we may lose valuable intellectual property rights or personnel. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and other employees.

Risks Related to the Ownership of our Common Stock

The market for our common stock is new and may not develop to provide investors with adequate liquidity.

We conducted our initial public offering in April of 2022. Therefore, the market for our common stock is new, and we cannot assure you that an active trading market for our common stock will develop, or if it does develop, it may not be maintained. You may not be able to sell your common stock quickly or at the market price if trading in our securities is not active.

If securities or industry analysts do not publish research or publish inaccurate or unfavorable research about our business, our stock price and trading volume could decline.

The trading market for our common stock will depend in part on the research and reports that securities or industry analysts publish about us or our business. If too few securities or industry analysts provide coverage or if one or more of the analysts who cover us downgrade our stock or publish inaccurate or unfavorable research about our business, the price of our stock would likely decline. If one or more of these analysts cease coverage of us or fail to publish reports on us regularly, demand for our stock could decrease, which might cause the price of our stock and trading volume to decline.

The price of our common stock may be volatile, and you may be unable to resell your shares at or above the price paid.

The trading price of our common stock may fluctuate substantially. The market price of our common stock may fluctuate higher or lower, depending on many factors, some of which are beyond our control and may not be related to our operating performance. These fluctuations could cause you to lose all or part of your investment in our common stock. Factors that could cause fluctuations in the trading price of our common stock include the following:

In addition, if the market for medical device or healthcare stocks or the stock market, in general, experience a loss of investor confidence, the trading price of our common stock could decline for reasons unrelated to our business, results of operations, or financial condition. The trading price of our common stock might also decline in reaction to events that affect other companies in our industry even if these events do not directly affect us. In the past, following periods of volatility in the market price of a company’s securities, securities class action litigation has often been brought against that company. If our stock price is volatile, we may become the target of securities litigation. Securities litigation could result in substantial costs and divert our management’s attention and resources from our business. This could have a material adverse effect on our business, results of operations, and financial condition.

The price and volume of our common stock may rapidly fluctuate or may decline regardless of our operating performance, resulting in substantial losses for investors.

The trading price of our common stock may be subject to instances of extreme stock price run-ups followed by rapid price declines and stock price volatility unrelated to both our actual and expected operating performance and financial condition or prospects, making it difficult for prospective investors to assess the rapidly changing value of our stock. Further, the trading price of our common stock could be highly volatile and subject to wide fluctuations in response to various factors, some of which are beyond our control, including limited trading volume, actual or anticipated fluctuations in our results of operations; the financial projections we may provide to the public, any changes in these projections or our failure to meet these projections; failure of securities analysts to initiate or maintain coverage of our Company, changes in financial estimates or ratings by any securities analysts who follow our Company or our failure to meet these estimates or the expectations of investors; announcements by us or our competitors of significant innovations, acquisitions, strategic partnerships, joint ventures, operating results or capital commitments; changes in operating performance and stock market valuations of other companies in our industry; price and volume fluctuations in the overall stock market, including as a result of trends in the economy as a whole; changes in our Board or management; sales of large blocks of our Common Stock, including sales by our executive officers, directors and significant stockholders; lawsuits threatened or filed against us; changes in laws or regulations applicable to our business; the expiration of lock-up agreements; changes in our capital structure, such as future issuances of debt or equity securities; short sales, hedging and other derivative transactions involving our capital stock; general economic and geopolitical conditions, including the current or anticipated impact of military conflict and related sanctions imposed on Russia by the United States and other countries due to Russia’s recent invasion of Ukraine; and the other factors described in this section of the report captioned “Risk Factors.”

Sales of substantial amounts of our common stock in the public markets, or the perception that sales might occur, could reduce the price of our common stock and may dilute our current stockholders voting power and their ownership interest in us.

Sales of a substantial number of shares of our common stock in the public or the perception that these sales could occur, could adversely affect the market price of our common stock, and may make it more difficult for holders of our common stock to sell their common stock at a time and price that you deem appropriate and affect our ability to raise capital through the sale of equity securities.

We may issue our shares of common stock or securities convertible into our common stock from time to time in connection with a financing, acquisition, investments or otherwise. Any such issuance could result in substantial dilution to our existing stockholders and cause the trading price of our common stock to decline. 

We may be subject to securities litigation, which is expensive and could divert our management’s attention.

The market price of our securities may be volatile, and in the past companies that have experienced volatility in the market price of their securities have been subject to securities class action litigation. We may be the target of this type of litigation in the future. Securities litigation against us could result in substantial costs and divert our management’s attention from other business concerns.

We may not be able to satisfy listing requirements of Nasdaq to maintain a listing of our common stock.

We must meet certain financial and liquidity criteria to maintain the listing of our common stock on the Nasdaq Stock Market LLC (“Nasdaq”). If we violate the maintenance requirements for continued listing of our common stock, our common stock may be delisted. In addition, our board of directors may determine that the cost of maintaining our listing on a national securities exchange outweighs the benefits of such listing. A delisting of our common stock from Nasdaq may materially impair our stockholders’ ability to buy and sell our common stock and could have an adverse effect on the market price of, and the efficiency of the trading market for, our common stock. In addition, the delisting of our common stock could significantly impair our ability to raise capital.

On January 4, 2024, we received a written notice (the “Notice”) from Nasdaq dated January 4, 2024, indicating that, as a result of Frank Fischer’s resignation from the Board, audit committee of the Board (the “Audit Committee”) and compensation committee of the Board (the “Compensation Committee”), effective November 30, 2023, that the Company was not currently in compliance with Nasdaq Listing Rule 5605, which requires that (i) a majority of the Board be comprised of independent directors, (ii) the Audit Committee is comprised of at least three independent directors and (iii) the Compensation Committee is comprised of at least two independent directors. Kristine Jacques was appointed to the Board on March 25, 2024 and as a result, as of March 25, 2024, the Company partly complied with Nasdaq Listing Rule 5605, specifically the requirement that a majority of the Board be comprised of independent directors. The Audit Committee, however, currently is comprised of only two independent directors and the Compensation Committee is only comprised of one independent director. In accordance with Nasdaq Listing Rule 5605(b)(1)(A), the Company has a “cure period” of until the earlier of the Company’s next annual shareholders’ meeting or November 30, 2024, or if the next annual shareholders’ meeting is held before May 28, 2024, then the Company must evidence compliance no later than May 28, 2024. The Company intends to elect one or more independent directors to serve as a member of the Audit Committee and the Compensation Committee during this cure period.

The Notice has no immediate effect on v listing or trading of the Company’s common stock on The Nasdaq Capital Market.

Our failure to maintain effective internal controls over financial reporting could have an adverse impact on us.

We are required to establish and maintain appropriate internal controls over financial reporting. Failure to establish those controls, or any failure of those controls once established, could adversely impact our public disclosures regarding our business, financial condition, or results of operations. In addition, management’s assessment of internal controls over financial reporting may identify weaknesses and conditions that need to be addressed in our internal controls over financial reporting or other matters that may raise concerns for investors. Any actual or perceived weaknesses and conditions that need to be addressed in our internal control over financial reporting, disclosure of management’s assessment of our internal controls over financial reporting or disclosure of our public accounting firm’s attestation to or report on management’s assessment of our internal controls over financial reporting may have an adverse impact on the price of our common stock.

A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. In addition, the design of a control system must reflect the fact that there are resource constraints, and the benefit of controls must be relative to their costs. Because of the inherent limitations in all control systems, no system of controls can provide absolute assurance that all control issues and instances of fraud, if any, within our Company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. Further, controls can be circumvented by individual acts of some persons, by collusion of two or more persons, or by management override of the controls. The design of any system of controls is also based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Over time, a control may become inadequate because of changes in conditions or the degree of compliance with policies or procedures may deteriorate. Because of inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and may not be detected.

At present, management has identified a material weakness due to lack of segregation of duties. The lack of segregation of duties existed as a result of the Company having no employees until June 2021. Management has taken initial steps to remedy this weakness by hiring a Chief Financial Officer, a director of SEC reporting and compliance, and a senior accountant, and engaging a cost accounting consultant and external financial consultants, and plans to continue to add additional resources, technology and headcount as warranted by the growth of the Company. While we believe these efforts will improve our internal controls and address the underlying causes of the material weakness, such material weakness will not be remediated until our remediation plan has been fully implemented and we have concluded that our controls are operating effectively for a sufficient period of time. We cannot be certain that the steps we are taking will be sufficient to remediate the control deficiencies that led to our material weakness in our internal control over financial reporting or prevent future material weaknesses or control deficiencies from occurring. While we are working to remediate the material weakness as timely and efficiently as possible, at this time we cannot provide an estimate of costs expected to be incurred in connection with the implementation of this remediation plan, nor can we provide an estimate of the time it will take to complete this remediation plan. Even if management does establish effective remedial measures, we cannot guarantee that those internal controls and disclosure controls that we put in place will prevent all possible errors, mistakes, or all fraud.

Our financial controls and procedures may not be sufficient to ensure timely and reliable reporting of financial information, which, as a public company, could materially harm our stock price.

We will require significant financial resources to maintain our public reporting status. We cannot assure you we will be able to maintain adequate resources to ensure that we will not have any future material weakness in our system of internal controls. The effectiveness of our controls and procedures may in the future be limited by a variety of factors including:

Our internal control over financial reporting will be a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles in the United States of America. Our internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the Company’s assets that could have a material effect on the financial statements.

Despite these anticipated controls, because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Therefore, even those systems determined to be effective can provide only reasonable assurance of achieving their control objectives. Furthermore, smaller reporting companies like us face additional limitations. Smaller reporting companies employ fewer individuals and can find it difficult to employ resources for complicated transactions and effective risk management. Additionally, smaller reporting companies tend to utilize general accounting software packages that lack a rigorous set of software controls.

If we fail to have effective controls and procedures for financial reporting in place, we could be unable to provide timely and accurate financial information and be subject to investigation by the SEC and civil or criminal sanctions.

We must implement additional and expensive procedures and controls in order to grow our business and organization and to satisfy reporting requirements, which will increase our costs and require additional management resources.

As a public company, we are required to comply with the Sarbanes-Oxley Act of 2002 (the “Sarbanes-Oxley Act”) and the related rules and regulations of the SEC, including the requirements that we maintain disclosure controls and procedures and adequate internal control over financial reporting. Compliance with the Sarbanes-Oxley Act and other SEC and national exchange requirements will increase our costs and require additional management resources. We have begun the process of upgrading our procedures and controls and will need to begin implementing additional procedures and controls as we grow our business and organization and to satisfy new reporting requirements. If we are unable to complete the required assessment as to the adequacy of our internal control over financial reporting, as required by Section 404 of the Sarbanes-Oxley Act or if we fail to establish and maintain internal control over financial reporting, our ability to produce timely, accurate and reliable periodic financial statements could be impaired.

If we do not establish and maintain adequate internal control over financial reporting, investors could lose confidence in the accuracy of our periodic reports filed under the Exchange Act. Additionally, our ability to obtain additional financing could be impaired or a lack of investor confidence in the reliability and accuracy of our public reporting could cause our stock price to decline.

We are an “emerging growth company” under the JOBS Act of 2012 and we cannot be certain if the reduced disclosure requirements applicable to emerging growth companies will make our common stock less attractive to investors.

We are an “emerging growth company,” as defined in the Jumpstart Our Business Startups Act of 2012 (the “JOBS Act”), and we may take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not “emerging growth companies” including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and shareholder approval of any golden parachute payments not previously approved. We cannot predict if investors will find our common stock less attractive because we may rely on these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may be more volatile.

In addition, Section 107 of the JOBS Act also provides that an “emerging growth company” can take advantage of the extended transition period provided in Section 7(a)(2)(B) of the Securities Act of 1933 (the “Securities Act”) for complying with new or revised accounting standards. In other words, an “emerging growth company” can delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. We are choosing to take advantage of the extended transition period for complying with new or revised accounting standards.

We will remain an “emerging growth company” until the last day of the fiscal year following the fifth anniversary of the date of the first sale of our common stock pursuant to an effective registration statement under the Securities Act, although we will lose that status sooner if our revenues exceed $1.235 billion, if we issue more than $1 billion in non-convertible debt in a three year period, or we are deemed to be a large accelerated filer under applicable SEC rules.

Our status as an “emerging growth company” under the JOBS Act may make it more difficult to raise capital as and when we need it.

Because of the exemptions from various reporting requirements provided to us as an “emerging growth company” and because we will have an extended transition period for complying with new or revised financial accounting standards, we may be less attractive to investors, and it may be difficult for us to raise additional capital as and when we need it. Investors may be unable to compare our business with other companies in our industry if they believe that our financial accounting is not as transparent as other companies in our industry. If we are unable to raise additional capital as and when we need it, our financial condition and results of operations may be materially and adversely affected.

We have not paid dividends in the past and do not expect to pay dividends in the future, and any return on investment may be limited to the value of our stock.

We have never paid cash dividends on our common stock and do not anticipate paying cash dividends on our common stock in the foreseeable future. We currently intend to retain any future earnings to support the development of our business and do not anticipate paying cash dividends in the foreseeable future. Our payment of any future dividends will be at the discretion of our board of directors after taking into account various factors, including, but not limited to, our financial condition, operating results, cash needs, growth plans and the terms of any credit agreements that we may be a party to at the time. In addition, our ability to pay dividends on our common stock may be limited by Delaware state law. Accordingly, investors must rely on sales of their common stock after price appreciation, which may never occur, as the only way to realize a return on their investment. Investors seeking cash dividends should not purchase our common stock.

The elimination of personal liability against our directors and officers under Delaware law and the existence of indemnification rights held by our directors, officers and employees may result in substantial expenses.

Our amended and restated certificate of incorporation, as amended (“Certificate of Incorporation”), and our bylaws (“Bylaws”) eliminate the personal liability of our directors and officers to us and our stockholders for damages for breach of fiduciary duty as a director or officer to the extent permissible under Delaware law. Further, our Certificate of Incorporation allows for us to and our Bylaws provide that we are obligated to indemnify each of our directors or officers to the fullest extent authorized by Delaware law and, subject to certain conditions, advance the expenses incurred by any director or officer in defending any action, suit or proceeding prior to its final disposition. Those indemnification obligations could expose us to substantial expenditures to cover the cost of settlement or damage awards against our directors or officers, which we may be unable to afford. Further, those provisions and resulting costs may discourage us or our stockholders from bringing a lawsuit against any of our current or former directors or officers for breaches of their fiduciary duties, even if such actions might otherwise benefit our stockholders.

Our Certificate of Incorporation designates the Court of Chancery of the State of Delaware as the exclusive forum for certain litigation that may be initiated by our stockholders, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us.

Our Certificate of Incorporation specifies that, except for claims arising under federal securities laws, unless we consent in writing to the selection of an alternative forum, the Court of Chancery of the State of Delaware shall be the sole and exclusive forum for (a) any derivative action or proceeding brought on behalf of the Company, (b) any action asserting a claim of breach of a fiduciary duty owed by any director, officer, employee or agent of the Company to the Company or the Company’s stockholders, (c) any action asserting a claim arising pursuant to any provision of the Delaware General Corporation Law, our Certificate of Incorporation or Bylaws, or (d) any action asserting a claim governed by the internal affairs doctrine, in each case subject to said Court of Chancery having personal jurisdiction over the indispensable parties named as defendants therein. Any person or entity purchasing or otherwise acquiring any interest in shares of our capital stock shall be deemed to have notice of and to have consented to the provisions of our Certificate of Incorporation as described above.

This choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or any of our directors, officers, other employees or stockholders, which may discourage lawsuits with respect to such claims. As such, stockholders of the Company seeking to bring a claim regarding the internal affairs of the Company may be subject to increased costs associated with litigating in Delaware as opposed to their home state or other forum, precluded from bringing such a claim in a forum they otherwise consider to be more favorable, and discouraged from bringing such claims as a result of the foregoing or other factors related to forum selection. Alternatively, if a court were to find the choice of forum provision contained in our Certificate of Incorporation to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could harm our business, operating results and financial condition.

We believe these provisions benefit us by providing increased consistency in the application of Delaware law by chancellors particularly experienced in resolving corporate disputes, efficient administration of cases on a more expedited schedule relative to other forums and protection against the burdens of multi-forum litigation. However, the provision may have the effect of discouraging lawsuits against our directors, officers, employees, and agents as it may limit any stockholder’s ability to bring a claim in a judicial forum that such stockholder finds favorable for disputes with us or our directors, officers, employees or agents. The enforceability of similar choice of forum provisions in other companies’ certificates of incorporation has been challenged in legal proceedings, and it is possible that, in connection with any applicable action brought against us, a court could find the choice of forum provisions contained in our Certificate of Incorporation to be inapplicable or unenforceable in such action. If a court were to find the choice of forum provision contained in our Certificate of Incorporation to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could adversely affect our business, financial condition or results of operations.

Item 1B. Unresolved Staff Comments

None

Item 1C. Cybersecurity

Cybersecurity Risk Management and Strategy. We maintain a cyber-risk management program which is intended to assist in assessing, identifying, and managing material risks from cybersecurity threats to our data and information systems. This program is to ensure that cybersecurity considerations are included in decision-making processes throughout the Company.

Our approach consists of, among other things, cybersecurity threat and vulnerability prevention, detection, mitigation and remediation of potential cybersecurity risks. We employ cybersecurity intrusion detection systems and continuous monitoring, in order to help defend against unauthorized access. We also employ identity-based access controls and identity authentication requirements. Access to the Company’s data is monitored and controlled according to access control policies. Data protection and privacy practices, including data loss prevention, help to safeguard sensitive information. We have also outsourced significant elements of our information technology infrastructure; as a result, we manage independent vendor relationships with third parties who are responsible for maintaining significant elements of our information technology systems and infrastructure.

Our Board of Directors is responsible for oversight of our cyber-risk management program and management’s role is to assist the Board of Directors in identifying and considering material cybersecurity risks, ensure implementation of management and employee level cybersecurity practices and training and provide the Board of Directors with regular reports regarding any cybersecurity attacks or vulnerabilities.

As of the date of this Annual Report on Form 10-K, we have not experienced any significant cybersecurity attacks and, to date, the risks from cybersecurity threats have not materially affected, or are reasonably likely to materially affect, our business strategy, results of operations, or financial condition. For more information regarding the risks the Company faces from cybersecurity threats, see “Item 1A. Risk Factors––Risks Related to Our Business and Operations––We are increasingly dependent on information technology, and our systems and infrastructure face certain risks, including cybersecurity and data leakage risks.”

Item 2. Properties

We lease and maintain our primary offices at 104 Cooper Court, Los Gatos, CA 95032. We do not currently own any real estate.

Item 3. Legal Proceedings

None.

Item 4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market Information

Our common stock is trading on the Nasdaq Capital Market under the symbol “TNON.”

Holders

As of March 29, 2024, we have issued and outstanding 3,726,974 shares of common stock issued and outstanding held by 64 stockholders of record. Because many of our shares of common stock are held by brokers and other institutions on behalf of stockholders, this number is not representative of the total number of beneficial owners of our stock.

We also have outstanding as of March 29, 2024:

Dividends

We have never declared or paid any cash dividend on our common stock. We intend to retain any future earnings to be used to provide working capital, to support our operations, and to finance the growth and development of our business, including potentially the acquisition of, or investment in, businesses, technologies or products that complement our existing business. We do not expect to pay cash dividends in the foreseeable future.

Recent Sales of Unregistered Securities 

Set forth below is information as to all of our equity securities sold by us during our fiscal year ended December 31, 2023, which was not registered under the Securities Act of 1933, as amended.

(a) Issuance of Capital Stock.

None.

(b) Option Grants.

None.

(c) Warrants.

On November 21, 2023 we issued the Note Purchasers (as defined below) warrants to purchase 45,000 shares of our common stock at $1.94 per share.

(d) Issuance of Notes.

On November 21, 2023, we entered into a Securities Purchase Agreement (the “Secured Note Purchase Agreements”) with Ascent Special Ventures LLC and WZC Ascent Family Trust (together, the “Note Purchasers”), pursuant to which the Company agreed to sell, issue and deliver to the Note Purchasers, in a private placement offering, a total of $1,250,000 in secured notes (the “Secured Notes”) and warrants to purchase 45,000 shares of our common stock at an exercise price equal to $1.94 per share. The Secured Notes accrued interest at 10% per annum and had a maturity date of November 21, 2024. The Secured Notes were prepayable in cash or in exchange for Series A Preferred Stock having a stated value equal to the sum of the outstanding principal amount of the Secured Notes plus accrued and unpaid interest thereon so long as certain conditions were met including the Company receiving commitments from investors other than the Note Purchasers to purchase shares of Series A Preferred Stock having a stated value of at least $3,750,000.

On February 20, 2024, the Note Purchasers agreed with the Company to a complete prepayment of the Company’s obligations under the Secured Notes in exchange for Series A Preferred Stock and warrants prior to the Company receiving $3,750,000 in commitments to purchase shares of Series A Preferred Stock in exchange for the Note Purchasers receiving an additional 30,000 warrants. Pursuant to this agreement the Note Purchasers received 84,729 shares of Series A Preferred Stock and warrants to purchase 157,094 shares of our common stock at $1.2705 per share and the Secured Notes were cancelled.

Securities Authorized for Issuance under Equity Compensation Plans

On October 1, 2012, the Board of Directors of the Company adopted the 2012 Plan. The 2012 Plan terminated in April 2022. There are 727,394 options issued and outstanding under the 2012 Plan that have not been exercised. These options are administered under the 2022 Plan.

In January and February of 2022 our board of directors and our shareholders approved our 2022 Equity Incentive Plan (the “2022 Plan,” together with the 2012 Plan, the “Plans”). The 2022 Plan governs equity awards to our employees, directors, officers, consultants and other eligible participants. Initially, the maximum number of shares of our common stock that may be subject to awards under the 2022 Plan are equal to (i) 1,600,000 plus (ii) the lesser of (a) 750,000 shares of our common stock and (b) the number of shares of our common stock subject to awards granted under the 2012 Plan that after the 2012 Plan is terminated are cancelled, expired or otherwise terminated without having been exercised in full, are tendered to or withheld by the Company for payment of an exercise price or for tax withholding obligations, or are forfeited to or repurchased by the Company due to failure to vest. The maximum number of shares that are subject to awards under the 2022 is subject to an annual increase equal to the lesser of (i) 1,100,000 shares of our common stock; (ii) a number of shares of our common stock equal to 4% of the prior year’s maximum number or (iii) such number of shares of our common stock as determined by the 2022 Plan administrator.

The types of awards permitted under the Plans include nonqualified stock options, incentive stock options, stock appreciation rights, restricted stock, restricted stock units, performance shares, performance units and other awards. Each option shall be exercisable at such times and subject to such terms and conditions as the Board may specify.

The Board of Directors has the power to amend, suspend or terminate the Plans without stockholder approval or ratification at any time or from time to time. No change may be made that increases the total number of shares of our common stock reserved for issuance pursuant to incentive awards or reduces the minimum exercise price for options or exchange of options for other incentive awards, unless such change is authorized by our stockholders within one year.

Equity Compensation Plan Information

The table below sets forth information as of December 31, 2023.

Use of Proceeds from our Initial Public Offering of Common Stock

Not applicable.

Transfer Agent

The transfer agent for the common stock is Vstock Transfer LLC, 18 Lafayette Place, Woodmere, New York, telephone (212) 828-8436.

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

None.

Item 6. [Reserved]

Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

You should read the following discussion and analysis of our financial condition and results of operations together with our financial statements and the notes to those statements included elsewhere in this Annual Report on Form 10-K. In addition to historical financial information, this discussion and analysis contains forward-looking statements that reflect our plans, estimates and beliefs. You should not place undue reliance on these forward-looking statements, which involve risks and uncertainties. As a result of many factors, including but not limited to those set forth under “Risk Factors,” our actual results may differ materially from those anticipated in these forward-looking statements. See “Cautionary Note Regarding Forward-Looking Statements.”

Overview

Tenon Medical, Inc., a medical device company formed in 2012, has developed a proprietary, U.S. Food and Drug Administration (“FDA”) approved surgical implant-system, which we call The Catamaran™ SI Joint Fusion System (“The Catamaran System”). The Catamaran System offers a novel, less invasive inferior-posterior approach to the sacroiliac joint (“SI Joint”) using a single, robust titanium implant to treat SI Joint dysfunction that often causes severe lower back pain. The system features the Catamaran™ Fixation Device which passes through both the axial and sagittal planes of the ilium and sacrum, transfixing the SI Joint along its longitudinal axis. Published clinical studies have shown that 15% to 30% of all chronic lower back pain is associated with the SI Joint.

With an entry similar to the SI Joint injection, the surgical approach is direct to the joint. The angle and trajectory of the inferior-posterior approach is designed to point away from critical neural and vascular structures and into the strongest cortical bone. Joined by a patented osteotome bridge, the implant design consists of two hollow fenestrated pontoons with an open framework to facilitate bony in-growth through the SI Joint. One pontoon fixates into the ilium and the other into the sacrum. The osteotome is designed to disrupt the articular portion of the joint to help facilitate a fusion response.

Our initial clinical results indicate that The Catamaran System implant is promoting fusion across the joint as evidenced by computerized tomography (CT) scans which is the gold standard widely accepted by the clinical community. We had our national launch of The Catamaran System in October 2022 and are building a sales and marketing infrastructure to market our product and address the greatly underserved market opportunity that exists.

We believe that the implant design and procedure we have developed, along with the 2D and 3D protocols for proper implantation will be received well by the clinician community who have been looking for a next generation device.

We have incurred net losses since our inception in 2012. As of December 31, 2023, we had an accumulated deficit of approximately $55.1 million. To date, we have financed our operations primarily through an initial public offering, private placements of equity securities, certain debt-related financing arrangements, and sales of our product. We have devoted substantially all of our resources to research and development, regulatory matters and sales and marketing of our product.

Reverse Stock Splits

On April 6, 2022, the Company effected a 1-for-2 reverse stock split (the “2022 Reverse Stock Split”) by filing an amendment to the Company’s Amended and Restated Certificate of Incorporation, as amended, with the Delaware Secretary of State. The 2022 Reverse Stock Split combined every two shares of our common stock issued and outstanding immediately prior to effecting the 2022 Reverse Stock Split into one share of common stock. Similarly, shares of Series A and Series B Preferred Stock became convertible into common stock at a conversion rate of one-to-0.5, subject to adjustments for stock dividends, splits, combinations, and similar events. No fractional shares were issued in connection with the 2022 Reverse Stock Split.

On November 2, 2023, the Company effected a 1-for-10 reverse stock split (the “2023 Reverse Stock Split”) by filing an amendment to the Company’s Amended and Restated Certificate of Incorporation, as amended, with the Delaware Secretary of State. The 2023 Reverse Stock Split combined every ten shares of our common stock issued and outstanding immediately prior to effecting the 2023 Reverse Stock Split into one share of common stock. No fractional shares were issued in connection with the 2023 Reverse Stock Split. All historical share and per share amounts reflected throughout this document have been adjusted to reflect the 2022 Reverse Stock Split and the 2023 Reverse Stock Split. The authorized number of shares and the par value per share of the Company’s common stock were not affected by the 2022 Reverse Stock Split or the 2023 Reverse Stock Split.

Critical Accounting Policies and Significant Judgments and Estimates

Our management’s discussion and analysis of our financial condition and results of operations is based on our audited consolidated financial statements, which have been prepared in accordance with United States generally accepted accounting principles (“U.S. GAAP”). The preparation of these financial statements requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the date of the financial statements, as well as the reported results of operations during the reporting periods. Our estimates are based on our historical experience and on various other factors that we believe are reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results could differ from these estimates under different assumptions or conditions. While our significant accounting policies are described in more detail in the notes to our consolidated financial statements included elsewhere in this Annual Report on Form 10-K, we believe that the accounting policies discussed below are those that are most critical to understanding our historical and future performance, as these policies relate to the more significant areas involving management’s judgments and estimates. For more detail on our critical accounting policies, see Note 2 to our consolidated financial statements.

Investments

We classify our investments in marketable debt securities as available-for-sale and record them at fair value in our consolidated balance sheets. Net unrealized gains and losses are recorded as a separate component of stockholders’ equity. Realized gains and losses are recorded in the consolidated statements of operations and comprehensive loss. We determine realized gains or losses on the sale of marketable debt securities on a specific identification method and record such gains and losses as a component of other income (expense), net.

Revenue Recognition

Our revenue is derived from the sale of our products to medical groups and hospitals in the United States. Revenue is recognized when control is transferred to the customer, in an amount that reflects the consideration we expect to be entitled to in exchange for the goods or services, using the following five step approach: (1) identify the contract with a customer, (2) identify the performance obligations in the contract, (3) determine the transaction price, (4) allocate the transaction price to the performance obligations in the contract, and (5) recognize revenue when a performance obligation is satisfied.

We generate our revenue from the sale of products to hospitals or medical facilities where our products are delivered in advance of a procedure. The performance obligation is the delivery of the products along with the completion of the surgery and therefore, revenue is recognized upon delivery to the customers and completion of the surgery, net of rebates and price discounts. We account for rebates and price discounts as a reduction to revenue, calculated based on the terms agreed to with the customer. Historically, there have been no significant rebates or price discounts. Sales prices are specified prior to the transfer of control to the customer, via either the customer contract, agreed price list, purchase order, or written communication with the customer. Prior to October 2022, we had an agreement in place with a national distributor, which included standard terms that did not allow for payment contingent on resale of the product, obtaining financing, or other terms that could impact the distributor’s payment obligation. We billed and collected directly with the end-user customers and recognized revenue based on the gross sales price. For direct sales to end-user customers, our standard payment terms are generally net 30 days.

We offer our standard warranty to all customers. We do not sell any warranties on a standalone basis. Our warranty provides that our products are free of material defects and conform to specifications, and includes an offer to replace or refund the purchase price of defective products. This assurance does not constitute a service and is not considered a separate performance obligation. We estimate warranty liabilities at the time of revenue recognition and record them as a charge to cost of goods sold.

Stock-Based Compensation

We account for all stock-based compensation awards using a fair-value method on the grant date and recognize the fair value of each award as an expense over the requisite service period.

We recognize compensation costs related to stock-based awards granted to employees, directors, and consultants including stock options, based on the estimated fair value of the awards on the date of grant. We estimate the grant date fair value, and the resulting stock-based compensation, using the Black-Scholes option-pricing model. The grant date fair value of the stock-based awards is generally recognized on a straight-line basis over the requisite service period, which is generally the vesting period of the respective awards.

The Black-Scholes option-pricing model requires the use of subjective assumptions to determine the fair value of stock-based awards. These assumptions include:

Expected Term—The expected term represents the period that stock-based awards are expected to be outstanding. The expected term for option grants is determined using the simplified method. The simplified method deems the expected term to be the midpoint between the vesting date and the contractual life of the stock-based awards.

Expected Volatility—Since we have only been publicly held since April 2022 and do not have any trading history for our common stock, the expected volatility was estimated based on the average volatility for comparable publicly traded companies over a period equal to the expected term of the stock option grants. The comparable companies were chosen based on their similar size, stage in the life cycle, or area of specialty.

Risk-Free Interest Rate—The risk-free interest rate is based on the U.S. Treasury zero coupon issues in effect at the time of grant for periods corresponding with the expected term of option.

Expected Dividend—We have never paid dividends on our common stock and have no plans to pay dividends on our common stock. Therefore, we used an expected dividend yield of zero.

We account for forfeitures as they occur.

Our board of directors intends all options granted to be exercisable at a price per share not less than the per share fair value of our common stock underlying those options on the date of grant.

Prior to our initial public offering, the estimated fair value of our common stock was determined at each valuation date by a third-party independent valuation firm in accordance with the guidelines outlined in the American Institute of Certified Public Accountants Practice Aid, Valuation of Privately-Held-Company Equity Securities Issued as Compensation. These valuations took into account numerous factors, including developments at our company and market conditions.

The May 21, 2021 valuation used a hybrid method which combines the Probability Weighted Expected Return Method (“PWERM”) with the OPM. The PWERM considers a set of discrete potential liquidity scenarios for the Company, the value common stock would receive in each scenario, and the time required and risk inherent in achieving those values. The May 21, 2021 valuation examined the following scenarios for the Company: (i) an IPO; (ii) remaining private and raising capital; and (iii) dissolution. Within the IPO scenario, 100% weighting was placed on the Market Approach for determining the enterprise value. The Market Approach assumes that businesses operating in the same industry will share similar characteristics, and therefore a comparison of the business to similar businesses whose financial information is publicly available may provide a reasonable basis to estimate a subject business’s value. The equity value in the IPO scenario was estimated considering guideline IPOs, the anticipated size of the Company’s offering, and forecasted cash and debt. The estimated common stock value as of the IPO was present valued using a discount rate of 22.4% based on Company’s WACC, less an adjustment of 2.0% to reflect the risk reduction of an IPO event.

The August 31, 2021 valuation used a hybrid method which combines the Probability Weighted Expected Return Method (“PWERM”) with the OPM. The PWERM considers a set of discrete potential liquidity scenarios for the Company, the value common stock would receive in each scenario, and the time required and risk inherent in achieving those values. The August 31, 2021 valuation examined the following scenarios for the Company: (i) an IPO; (ii) remaining private and raising capital; and (iii) dissolution. Within the IPO scenario, 100% weighting was placed on the Market Approach for determining the enterprise value. The Market Approach assumes that businesses operating in the same industry will share similar characteristics, and therefore a comparison of the business to similar businesses whose financial information is publicly available may provide a reasonable basis to estimate a subject business’s value. The equity value in the IPO scenario was estimated considering guideline IPOs, the anticipated size of the Company’s offering, and forecasted cash and debt. The estimated common stock value as of the IPO was present valued using a discount rate of 32.0% based on Company’s WACC, less an adjustment of 5.0% to reflect the risk reduction of an IPO event.

The October 28, 2021 valuation used a hybrid method which combines the Probability Weighted Expected Return Method (“PWERM”) with the OPM. The PWERM considers a set of discrete potential liquidity scenarios for the Company, the value common stock would receive in each scenario, and the time required and risk inherent in achieving those values. The October 28, 2021 valuation examined the following scenarios for the Company: (i) an IPO; (ii) remaining private and raising capital; and (iii) dissolution. Within the IPO scenario, 100% weighting was placed on the Market Approach for determining the enterprise value. The Market Approach assumes that businesses operating in the same industry will share similar characteristics, and therefore a comparison of the business to similar businesses whose financial information is publicly available may provide a reasonable basis to estimate a subject business’s value. The equity value in the IPO scenario was estimated considering guideline IPOs, the anticipated size of the Company’s offering, and forecasted cash and debt. The estimated common stock value as of the IPO was present valued using a discount rate of 27.2% based on Company’s WACC, less an adjustment of 5.0% to reflect the risk reduction of an IPO event.

In determining the enterprise value within the remain private scenario, 100% weighting was applied to the DCF Method under the income approach, in the same manner as in the December 31, 2018, 2019, and 2020 valuations. The discount rate in this scenario was determined to be 22.4% based on Company’s WACC. Adjustments were made to the enterprise value for the Company’s cash and debt as of the valuation date to determine the equity value in this scenario. The OPM was used to allocate the equity value to our common stock. The equity volatility rate was determined to be 70.0% based on the volatility rate of certain comparable public companies. DLOMs of (i) 10.0% in the IPO scenario and (ii) 30.0% in the remaining private scenario were applied to the common stock.

Following the closing of the initial public offering, the fair value of our common stock was determined based on the closing price of our common stock on the Nasdaq Capital Market.

Common Stock Warrants

We account for warrants for shares of common stock as equity or liabilities in accordance with the accounting guidance for derivatives. The accounting guidance provides a scope exception from classifying and measuring as a financial liability a contract that would otherwise meet the definition of a derivative if the contract is both (i) indexed to the entity’s own stock and (ii) classified in the stockholders’ deficit section of the consolidated balance sheet. We estimate the fair value of our warrants for shares of common stock by using the Black-Scholes option pricing model. Warrants classified as equity are recorded as additional paid-in capital on the consolidated balance sheet and no further adjustments to their valuation are made after the issuance of the warrants.

Income Taxes

We account for income taxes under the asset and liability method, whereby deferred tax assets and liabilities are determined based on the difference between the financial statement and tax bases of assets and liabilities using the enacted tax rates in effect for the year in which the differences are expected to affect taxable income. We assess the likelihood that the resulting deferred tax assets will be realized. A valuation allowance is provided when it is more likely than not that some portion or all of a deferred tax asset will not be realized.

We did not record a provision or benefit for income taxes during the twelve months ended December 31, 2023 or 2022. We continue to maintain a full valuation allowance against our net deferred tax assets.

We assess all material positions taken in any income tax return, including all significant uncertain positions, in all tax years that are still subject to assessment or challenge by relevant taxing authorities. Assessing an uncertain tax position begins with the initial determination of the position’s sustainability and is measured at the largest amount of benefit that is greater than fifty percent likely of being realized upon ultimate settlement. As of each balance sheet date, unresolved uncertain tax positions must be reassessed, and we will determine whether (i) the factors underlying the sustainability assertion have changed and (ii) the amount of the recognized tax benefit is still appropriate. The recognition and measurement of tax benefits requires significant judgment. Judgments concerning the recognition and measurement of a tax benefit may change as new information becomes available.

The Tax Reform Act of 1986 limits the use of net operating loss and tax credit carryforwards in certain situations where changes occur in the stock ownership of a company. We have not completed a study to determine whether any ownership changes per the provisions of Section 382 of the Tax Reform Act of 1986, as amended, as well as similar state provisions, have occurred.

Financial Operations Overview

Revenue

We derive substantially all our revenue from sales of The Catamaran System to a limited number of clinicians. Revenue from sales of The Catamaran System fluctuates based on volume of cases (procedures performed), discounts, and the number of implants used for a particular patient. Similar to other orthopedic companies, our revenue can also fluctuate from quarter to quarter due to a variety of factors, including reimbursement, changes in independent sales representatives and physician activities.

Cost of Goods Sold, Gross Profit, and Gross Margin

We utilize contract manufacturers for production of The Catamaran System implants and Catamaran Tray Sets. Cost of goods sold consists primarily of costs of the components of The Catamaran System implants and instruments, quality inspection, packaging, scrap and inventory obsolescence, as well as distribution-related expenses such as logistics and shipping costs. We anticipate that our cost of goods sold will increase in absolute dollars as case levels increase.

Our gross margins have been and will continue to be affected by a variety of factors, including the cost to have our product manufactured for us, pricing pressure from increasing competition, and the factors described above impacting our revenue.

Operating Expenses

Our operating expenses consist of sales and marketing, research and development, and general and administrative expenses. Personnel costs are the most significant component of operating expenses and consist of consulting expenses, salaries, sales commissions and other cash and stock-based compensation related expenses. We expect operating expenses to increase in absolute dollars as we continue to invest and grow our business.

Sales and Marketing Expenses

Sales and marketing expenses primarily consist of independent sales representative training and commissions in addition to salaries and stock-based compensation expense. Starting in May 2021, commissions to our national distributor have been based on a percentage of sales and we anticipate that these commissions will make up a significant portion of our sales and marketing expenses. We expect our sales and marketing expenses to increase in absolute dollars with the commercial launch of The Catamaran System resulting in higher commissions and salaries, increased clinician and sales representative training, and the start of clinical studies to gain wider clinician adoption of The Catamaran System. Our sales and marketing expenses may fluctuate from period to period due to timing of sales and marketing activities related to the commercial launch of our product.

Research and Development Expenses

Our research and development expenses primarily consist of engineering, product development, regulatory expenses, and consulting services, outside prototyping services, outside research activities, materials, and other costs associated with development of our product. Research and development expenses also include related personnel and consultants’ compensation and stock-based compensation expense. We expense research and development costs as they are incurred. We expect research and development expense to increase in absolute dollars as we improve The Catamaran System, develop new products, add research and development personnel, and undergo clinical activities that may be required for regulatory clearances of future products.

General and Administrative Expenses

General and administrative expenses primarily consist of salaries, consultants’ compensation, stock-based compensation expense, and other costs for finance, accounting, legal, compliance, and administrative matters. We expect our general and administrative expenses to increase in absolute dollars as we add personnel and information technology infrastructure to support the growth of our business. We also expect to incur additional general and administrative expenses as a result of operating as a public company, including but not limited to: expenses related to compliance with the rules and regulations of the SEC and those of The Nasdaq Stock Market LLC on which our securities are traded; additional insurance expenses; investor relations activities; and other administrative and professional services. While we expect the general and administrative expenses to increase in absolute dollars, we anticipate that it will decrease as a percentage of revenue over time.

Gain (Loss) on Investments

Gain (loss) on investments consists of interest income and realized gains and losses from the sale of our investments in money market and corporate debt securities.

Interest Expense

Interest expense is related to borrowings and includes deemed interest derived from the beneficial conversion prices of notes payable.

Other Income (Expense), Net

Other income and expenses have not been significant to date.

Results of Operations (in thousands, except percentages)

Comparison of the years ended December 31, 2023 and 2022 (in thousands, except percentages)

Revenue, Cost of Goods Sold, Gross Profit, and Gross Margin

Revenue. The increase in revenue for the year ended December 31, 2023 as compared to 2022 was primarily due to an increase of 312% in the number of surgical procedures in which the Catamaran System was used.

Cost of Goods Sold, Gross Profit, and Gross Margin. The increase in cost of goods sold for the year ended December 31, 2023 as compared to 2022 was due to an increase of 312% in the number of surgical procedures performed. Gross profit (loss) and gross margin percentage improved due to higher revenue associated with the increase in the number of surgical procedures, operating leverage created due to lower relative fixed costs and the absorption of more overhead into our standard cost.

Operating Expenses

Research and Development Expenses. Research and development expenses for the year ended December 31, 2023 increased as compared to 2022 primarily due to increased stock-based compensation ($509) and payroll expenses ($49), partially offset by decreased professional fees ($137).

Sales and Marketing Expenses. Sales and marketing expenses for the year ended December 31, 2023 decreased as compared to 2022 primarily due to payments in 2022 in association with the termination of the SpineSource sales agreement ($3,611) and decreased consulting and professional fees ($1,190), partially offset by increased payroll expenses ($2,388), sales commissions ($1,388) and stock-based compensation ($100). The increase in payroll and payroll related expenses is primarily due to the increased number of sales and marketing employees as we build out our sales function.

General and Administrative Expenses. General and administrative expenses for the year ended December 31, 2023 decreased as compared to 2022 primarily due to a legal settlement accrual in 2022 ($574) and decreased professional service fees ($852), partially offset by increased stock-based compensation ($639) and payroll expenses ($271).

Gain (Loss) on Investments, Interest Expense and Other Income (Expense), Net

Gain on Investments. Gain on investments for the year ended December 31, 2023 decreased as compared to 2022 due to interest on our lower amounts of investments in money market and corporate debt securities.

Interest Expense. Interest expense for the year ended December 31, 2023 decreased as compared to 2022 primarily due to the conversion of our convertible debt in association with our initial public offering in April 2022.

Other Expense, Net. Other income and expenses were not significant during the twelve months ended December 31, 2023 and 2022.

Liquidity and Capital Resources

As of December 31, 2023, we had cash and cash equivalents of $2.4 million. Since inception, we have financed our operations through private placements of preferred stock, debt financing arrangements, our initial public offering and the sale of our products. As of December 31, 2023, we had outstanding debt of $1.2 million.

As of December 31, 2023, we had an accumulated deficit of $55.1 million. During the years ended December 31, 2023 and 2022, we incurred net losses of $15.6 million and $18.9 million, respectively, and expect to incur additional losses in the future. We have not achieved positive cash flow from operations to date. Based upon our current operating plan, our existing cash and cash equivalents will not be sufficient to fund our operating expenses and working capital requirements through at least the next 12 months from the date these consolidated financial statements were available to be released. We plan to raise the necessary additional capital through one or a combination of public or private equity offerings, debt financings, and collaborations. We continue to face challenges and uncertainties and, as a result, our available capital resources may be consumed more rapidly than currently expected due to (a) the uncertainty of future revenues from The Catamaran System; (b) changes we may make to the business that affect ongoing operating expenses; (c) changes we may make in our business strategy; (d) regulatory developments affecting our existing products; (e) changes we may make in our research and development spending plans; and (f) other items affecting our forecasted level of expenditures and use of cash resources.

On February 20, 2024, we entered into a Securities Purchase Agreement with certain investors, pursuant to which we agreed to sell, issue and deliver to these investors, in a private placement offering, a total of 172,239 shares of our Series A Preferred Stock and warrants to purchase 258,374 shares of our common stock, par value $0.001 per share, at an exercise price equal to $1.2705 per share for an aggregate offering price of $2,605,000.

As we attempt to raise additional capital to fund our operations, funding may not be available to us on acceptable terms, or at all. If we are unable to obtain adequate financing when needed, we may have to delay, reduce the scope of or suspend one or more of our sales and marketing efforts, research and development activities, or other operations. We may seek to raise any necessary additional capital through a combination of public or private equity offerings, debt financings, and collaborations. If we do raise additional capital through public or private equity offerings, the ownership interest of our existing stockholders will be diluted, and the terms of these securities may include liquidation or other preferences that adversely affect our stockholders’ rights. If we raise additional capital through debt financing, we may be subject to covenants limiting or restricting our ability to take specific actions, such as incurring additional debt, making capital expenditures, or declaring dividends. If we are unable to raise capital, we will need to delay, reduce, or terminate planned activities to reduce costs. Doing so will likely harm our ability to execute our business plans. Due to the uncertainty in our ability to raise capital, management believes that there is substantial doubt in our ability to continue as a going concern for the next twelve months from the issuance of these consolidated financial statements.

Contractual Obligations

The following table summarizes our contractual obligations as of December 31, 2023:

Obligations under Terminated Sales Representative Agreement: On October 6, 2022, we entered into the Terminating Amended and Restated Exclusive Sales Representative Agreement (the “Termination Agreement”). In accordance with the Termination Agreement, (i) we paid the Representative $1,000 in cash; and (ii) we agreed to pay the Representative (a) $85 per month during the six months after the date of the Termination Agreement in return for efforts by the Representative to transition operations to us, (b) 20% of net sales of the Product sold in the United States and Puerto Rico until December 31, 2023 and (c) after December 31, 2023, 10% of net sales until such time as the aggregate amount paid to the Representative under this clause (c) and clause (b) above equal $3,600. In the event of an acquisition, we will pay the Representative $3,600 less previous amounts paid pursuant to clause (b) and clause (c) above. The timing of the payments under clause (b) and (c) is variable depending on the timing of our sales.

Cash Flows (in thousands, except percentages)

The following table sets forth the primary sources and uses of cash for each of the periods presented below:

The increase in net cash used in operating activities for the year ended December 31, 2023 as compared to 2022 was primarily attributable to decreases in our accrued expenses ($2,387) and accounts payable ($189) and increases in prepaid expenses ($244) and accounts receivable ($138), partially offset by our decreased net loss ($3,336), adjusted for increases in non-cash stock-based compensation expenses ($1,248) and a decrease in common stock issued for services ($1,561).

Cash provided by investing activities for the year ended December 31, 2023 consisted primarily of the net sales of short-term investments of approximately $6.5 million as used those amounts to fund operations, partially offset by purchases of property and equipment of $0.4 million as we acquired the components for our surgical tray sets. Cash used in investing activities for the year ended December 31, 2022 consisted primarily of the net purchase of short-term investments of approximately $2.0 million as we invested a portion of our IPO proceeds, in addition to purchases of property and equipment of $0.8 million as we acquired the components for our surgical tray sets.

Cash provided by financing activities for the year ended December 31, 2023 consisted of the $5.3 million, net of relevant expenses, received from our offerings of stock in 2023 in addition to $1.2 million from the issuance of the Convertible Notes. Cash provided by financing activities for the year ended December 31, 2022 consisted of the $14.1 million cash received from our initial public offering in April 2022, net of relevant expenses.

Off-Balance Sheet Arrangements

As of December 31, 2023 and 2022, we did not have any relationships with unconsolidated organizations or financial partnerships, such as structured finance or special purpose entities that would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes.

Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

The Company is a smaller reporting company as defined by Rule 12b-2 of the Exchange Act and is not required to provide the information required under this item.6

Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Tenon Medical, Inc.

Consolidated Financial Statements

December 31, 2023 and 2022

Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Stockholders and Board of Directors
Tenon Medical, Inc.

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated balance sheet of Tenon Medical, Inc. (the “Company”) as of December 31, 2023, the related consolidated statements of operations and comprehensive loss, preferred stock and stockholders’ equity, and cash flows for the year then ended, and the related notes (collectively, the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the consolidated financial position of the Company as of December 31, 2023, and the consolidated results of its operations and its cash flows for the year then ended, in conformity with U.S. generally accepted accounting principles.

Going Concern

The accompanying consolidated financial statements have been prepared assuming that the Company will continue as a going concern. As described in Note 2 to the consolidated financial statements, the Company has experienced recurring losses, negative cash flows from operations, and has limited capital resources. These matters raise substantial doubt about the Company’s ability to continue as a going concern. Management’s plans regarding these matters are also described in Note 2. The consolidated financial statements do not include any adjustments that might result from the outcome of this uncertainty.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the consolidated financial statements based on our audit. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audit, we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audit included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audit also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audit provides a reasonable basis for our opinion.

/s/ Haskell & White LLP

We have served as the Company’s auditor since 2023.

Irvine, California

March 29, 2024