Volcon, Inc. [VLCN] Filings

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549 

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2023

OR

For the transition period from ________ to__________

Commission file number: 001-40867

Volcon, Inc.

(Exact Name of Registrant as Specified in Its Charter)

(512) 400-4271

(Registrant’s Telephone Number, Including Area Code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐   No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐  No ☒

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See definitions of “large accelerated filer”, “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to § 240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ☐    No  ☒

As of March 27, 2024, there were 18,748,955 outstanding shares of our common stock. The aggregate market value of shares of common stock held by non-affiliates as of June 30, 2023 was $13,419,273 based on the closing sale price as reported by the NASDAQ Stock Market.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s proxy statement related to its 2024 Annual Stockholders’ Meeting to be filed subsequently are incorporated by reference into Part II of this Form 10-K. Except as expressly incorporated by reference, the registrant’s proxy statement shall not be deemed to be part of this report.

TABLE OF CONTENTS

Special Note Regarding Forward-Looking Statements

This Form 10-K, together with other statements and information publicly disseminated by our company, contains certain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the "Securities Act"), and Section 21E of the Securities Exchange Act of 1934, as amended (the "Exchange Act"). We intend such forward-looking statements to be covered by the safe harbor provisions for forward-looking statements contained in the Private Securities Litigation Reform Act of 1995 and include this statement for purposes of complying with these safe harbor provisions.

In addition, from time to time, we or our representatives may make forward-looking statements orally or in writing. We base these forward-looking statements on our expectations and projections about future events, which we derive from the information currently available to us. Such forward-looking statements relate to future events or our future performance, including: our financial performance and projections; our growth in revenue and earnings; our product development and production releases; and our business prospects and opportunities. You can identify forward-looking statements by those that are not historical in nature, particularly those that use terminology such as “may,” “should,” “expects,” “anticipates,” “contemplates,” “estimates,” “believes,” “plans,” “projected,” “predicts,” “potential,” or “hopes” or the negative of these or similar terms. In evaluating these forward-looking statements, you should consider various factors, including: our ability to change the direction of the Company; our ability to keep pace with new technology and changing market needs; and the competitive environment of our business. These and other factors may cause our actual results to differ materially from any forward-looking statement. Forward-looking statements are only predictions. The forward-looking events discussed in this document and other statements made from time to time by us or our representatives, may not occur, and actual events and results may differ materially and are subject to risks, uncertainties and assumptions about us. We are not obligated to publicly update or revise any forward-looking statement, whether as a result of uncertainties and assumptions, the forward-looking events discussed in this document and other statements made from time to time by us or our representatives might not occur.

While we believe we have identified material risks, these risks and uncertainties are not exhaustive. Other sections of this Form 10-K describe additional factors that could adversely impact our business and financial performance. Moreover, we operate in a very competitive and rapidly changing environment. New risks and uncertainties emerge from time to time, and it is not possible to predict all risks and uncertainties, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements.

Although we believe the expectations reflected in the forward-looking statements are reasonable, we cannot guarantee future results, level of activity, performance or achievements. Moreover, neither we nor any other person assumes responsibility for the accuracy or completeness of any of these forward-looking statements. You should not rely upon forward-looking statements as predictions of future events. We are under no duty to update any of these forward-looking statements after the date of this Form 10-K to conform our prior statements to actual results or revised expectations, and we do not intend to do so.

Forward-looking statements include, but are not limited to, statements about:

PART I

ITEM 1. BUSINESS

Overview

We are an all-electric, off-road powersports vehicle company developing electric two and four-wheel motorcycles and utility terrain vehicles, or UTVs, also known as side-by-sides, along with a line of upgrades and accessories. In October 2020, we began building and testing prototypes for our future offerings with two off-road motorcycles – the Grunt and the Runt. Our motorcycles feature unique frame designs protected by design patents. Additional utility and design patents have been filed for other aspects of Volcon’s vehicles.

Initially, we began to sell and distribute the Grunt and related accessories in the United States on a direct-to-consumer sales platform. However, we terminated our Grunt direct-to-consumer sales platform in November 2021. Beginning in November 2021, we began negotiating dealership agreements with powersports dealers to display and sell our vehicles and accessories. Customers can now, or will soon be able to, buy our vehicles and accessories directly from a local dealership. Some of these dealers will also provide warranty and repair services to customers. As of March 15, 2024, we have 103 active dealers. Dealers can order any of our available products provided they are current on their accounts receivable and are within their established credit limit. We are offering dealers payment terms 30 to 90 days to make larger purchases of our vehicles. We have entered into an accounts receivable factoring arrangement to allow the Company the ability to generate cash for working capital. We have agreements with third party financing companies to provide financing to qualified customers of each dealer. There is no recourse to the Company or the dealer if the dealer’s customer defaults on the financing agreement with the third party.

We sell our vehicles internationally through importers. Each importer buys vehicles by the container and sells vehicles and accessories to local dealers or directly to consumers. Local dealers or the importer will provide warranty and repair services for vehicles purchased in their country. In October 2023, we made a decision to postpone expanding our dealer network in Canada for the foreseeable future and we have terminated the employment of our Canadian regional sales managers. As of March 15, 2024, we have signed agreements with six importers in Latin America, one importer for the Caribbean Region, collectively referred to herein as the LATAM importers, one importer in New Zealand, and one importer in Australia to sell our vehicles and accessories in their assigned countries/markets. In 2024, we expect to expand our global sales of our vehicles and accessories beyond our current distributor base.

In June 2022, we signed an exclusive distribution agreement with Torrot Electric Europa S.A., referred to herein as Torrot, to distribute their electric motorcycles for youth riders in Latin America. In October 2022, we signed an expanded agreement with Torrot, which superseded the June 2022 agreement, to also be the exclusive distributor of Torrot and Volcon co-branded youth electric motorcycles in the U.S. as well as Latin America. Finally, in December 2022, we signed an expanded agreement with Torrot to be the exclusive distributor of Volcon co-branded youth electric motorcycles in Canada. In June 2023, we wrote down all remaining Torrot branded inventory in the amount of $84,000. In December 2023 we notified Torrot that we were terminating our agreements due to continued lower than expected sales at significantly discounted pricing. In 2023, we wrote down the Volcon co-branded Torrot youth motorcycles by $2,674,352 to reduce their cost to the estimated net realizable value due to lower than expected sales. We have agreed to give Torrot a total of 1,000 Volcon branded Torrot motorcycles originally purchased for $1.8 million, an up front payment of $370,000 and an additional $1.7 million to be paid out at $100,000 over 17 months beginning in April 2024 in exchange for unfulfilled 2023 and 2024 unit purchases. As of December 31, 2023, we have Volcon Youth inventory of approximately $239,935, after reducing these to the estimated net realizable value, of Volcon branded Torrot motorcycles and accessories which we intend to liquidate and we have agreed to give Torrot sales rights in the U.S., Canada and LATAM after June 30, 2024.

In July 2022, we expanded our offerings with the introduction of the first of our Volcon UTV models, the Stag, which we initially anticipated would be available for delivery to customers in the fourth quarter of 2023, followed by additional models of the Stag expected in 2024 and 2025. We delivered the first Stag to a customer in February 2024. The Stag is being manufactured by a third party and incorporates electrification units, which include batteries, drive units and control modules provided by General Motors. Beginning in June 2022, we took non-binding pre-production orders which were cancelable prior to delivery. In the third quarter of 2023 we canceled all of the original pre-production orders due to the introduction of multiple models and new pricing. We began taking new pre-production orders for the newly introduced models in the third quarter of 2023.

In August 2022, we ceased manufacturing of the Grunt and we outsourced the manufacturing of the remaining Grunts and the 2023 Grunt EVO to the same third party manufacturer as the Stag. The 2023 Grunt EVO has replaced the Grunt and has a belt drive rather than a chain drive as well as an updated rear suspension. We began selling the Grunt EVO in the third quarter of 2023.

We began taking pre-orders for an E-Bike, the Brat, in September 2022 and shipments to customers began in the fourth quarter of 2022. The Brat is being manufactured by a third party. In January 2023, we began selling the Brat directly to consumers through our website. Consumers who order the Brat from our website can have the Brat shipped to their specified destination.

In November 2022, we finalized an agreement for the same third party that manufactures the Stag and Grunt EVO to manufacture the Runt LT. We received prototypes of the Runt LT in the first quarter of 2023. We are evaluating the market for the Runt LT and will determine whether to proceed with production in the first half of 2024.

The estimated fulfillment of all orders we have received assumes that our third party manufacturers can successfully meet our order quantities and deadlines. If they are unable to satisfy orders on a timely basis, our customers may cancel their orders.

In September and October 2023, we reduced our headcount in several departments to reduce costs and we continue to evaluate other cost reduction opportunities.

Our Industry

The powersports industry is made up of on-road and off-road motorcycles, scooters, ATVs (all-terrain vehicles), UTVs, PWC (personal watercraft) and snowmobiles. The ATV market, in which a single rider sits on top of a four-wheeled vehicle (as opposed to sitting inside a UTV), is not a market we currently intend to pursue but will continue to evaluate our lineup of vehicles in the future. We have also developed an electric bicycle, or eBike, the Brat, primarily designed for on-road use but can also be ridden off-road.

While we are focusing solely on off-road for our motorcycles and UTVs, we are evaluating requirements in other countries where our vehicles will need to be homologated for on-road and off-road use in order to sell them there. We are also considering homologation kits that customers could purchase to allow them to use our vehicles both on-road and off-road depending on federal, state and local government rules and regulations.

Outdoor recreation is a major driver of the American economy. In 2022, the U.S. Bureau of Economic Analysis, or the BEA, found that outdoor recreation drives $563 billion of the current-dollar gross domestic product for the U.S. The BEA noted that motorcycles and ATVs make up $11.5 billion of that total.

According to Stratview Research – Powersports Market Research Report, the powersports industry grew by 10% in terms of units in 2020, its highest growth rate ever achieved. The long-term outlook for growth and demand for powersports, according to the report, especially off-road vehicles, or ORVs, and power watercraft, or PWCs is positive. The Stratview Research report estimates the powersports market to grow at a compound annual growth rate, or CAGR, of 5.7% during 2022 to 2027 to reach a value of

$47.9 billion by 2027.

According to a report by Allied Market Research, the global ATV and UTV market was valued at $7.6 billion in 2017, and is projected to reach $11.95 billion by 2027, registering a CAGR of 6.7% from 2020 to 2027.

According to Market Reports World, the global off-road motorcycles market size is estimated to grow at CAGR of almost 8% with new vehicle sales of 124,950 units during the forecast period 2022 to 2027.

According to the PowerSports Business 2023 Market Data Book:

While inflationary pressures may have impacted demand, we believe the new culture of escape and outdoor activities will continue to drive off-road powersports recreation. We believe there are very few all-electric off-road powersports companies, and traditional powersports companies have only recently started making electric products, so significant data on off-road electric vehicles does not exist yet.

Our Products

We feature motorcycle and UTV products that are all-electric and primarily designed for off-road use, in addition to a Class 2 eBike, the Brat, that can be used on or light off-road. The off-road market is growing faster than on-road and on-road products require costly levels of certification, homologation and compliance with the Department of Transportation (DOT), the National Highway Traffic Safety Administration (NHTSA) and other government regulators. For our motorcycles and UTVs, we are solely focusing on developing them for the off-road market. Due to these regulations, our motorcycles and UTVs are not legal for on-road use without homologation by customers who may be able to purchase parts or kits from other third parties. All vehicles other than the Brat come or will come with a warning label stating “This vehicle is designed and manufactured for off-road use only. It does not conform to federal motor vehicle safety standards and operation on public streets, roads, or highways is illegal”, and therefore our vehicles cannot be legally registered for on-road use in any state in the U.S and in many countries without the customer homologating the vehicle. In addition to powersports vehicles, we source, market and sell accessories and upgrades and continue to source new accessories and upgrades. These do or will feature parts designed to increase performance or appearance, in addition to practical add-ons to equip Volcon vehicles for hunters, anglers, ranchers and farmers.

The Stag

In July 2022, we publicly introduced a prototype of the Stag. We began taking pre-production orders from dealers in June 2022 and consumers in July 2022. These original pre-production orders were canceled in the third quarter of 2023 and new pre-production orders were taken from dealers and consumers. The consumer pre-production orders will be transferred to dealers located near the consumer. We delivered our first Stag to the Army Corps. of Engineers in February 2024. Pre-production orders of the Stag are non-binding and cancelable prior to delivery. The Stag will be Volcon’s first utility/sport UTV with a 64” width to ensure it is able to operate in states with 65”-maximum-width trails.

The 2024 Stag LTD is our first UTV model launched and will seat up to four people, with folding rear seats, a four point harness system, high performance shocks and tires, on demand all-wheel drive, variable power steering, and a full line of accessories.

We expect to introduce additional UTV models in the future but the timing and specifications have not yet been determined.

We also expect to introduce a larger, longer range UTV (to be named) in the future, which will be the largest, most powerful model in the Volcon line. We are designing this vehicle to have superior range and speed, but still be able to haul and tow far more than a traditional UTV. The timing of the release of this vehicle has not been determined.

Our ability to release new future products is dependent on the success of our current model and our ability to receive future financing of which there is no assurance.

The Grunt EVO

Our first product to market, the Grunt, began shipping to customers in the third quarter of 2021. The Grunt EVO was introduced in 2023 and we began selling it in September 2023. The Grunt EVO is different from the Grunt as it has a belt drive rather than a chain drive, an upgraded rear shock and rear suspension, and a new seat design and is available in three different colors. There are also aftermarket accessories available.

The Grunt EVO’s frame, low seat height and oversize tires are designed to make it look like the fat tire bikes of the 1970s and ’80s. These unique elements of the Grunt EVO are not just for styling, but we believe they help make it easier to ride as compared to other off-road motorcycles on the market. The low seat height and large tires are designed to make the Grunt EVO stable at all speeds on all surfaces in the off-road environment. The electric drivetrain has no clutch and no gears, making it easy for almost anyone to operate.

Although the Grunt EVO can be used as delivered, we have developed an app, which can be downloaded at no additional cost, that we believe will enhance the riding experience. The Grunt EVO has a small, optional, dash with limited data; however, the rider can use their smartphones and the app (subject to the rider’s cellular connectivity) as a dashboard by mounting it on the handlebars. The app makes it easier for users to set ride modes, check battery status, and update the bike’s firmware.

The Grunt EVO is designed for family off-road adventures, work on the farm or fun transport around private land. Its range can be up to 35 miles (with an optional second battery that provides an additional 35 miles) in its “explore” mode setting and it can be completely charged in less than three hours from a standard wall outlet.

The Runt LT

The Runt LT, which is a smaller version of the Grunt EVO, is better suited for small statured riders, more compact properties and trails, or as a pit bike at race events, while still delivering robust off-road capabilities. Unlike the Grunt EVO, the Runt LT will only have a display to show the rider certain aspects of the vehicle such as speed, battery charge and mode. The app will not be available in the initial version of the Runt LT but could be developed for future models.

Like the Grunt EVO, the Runt LT’s large tires and low-slung chassis will make it easier to ride than traditional off-road motorcycles. The Runt LT will have a range of up to 35 miles in its “explore” mode setting and charges in less than three hours from a standard wall outlet. We are currently evaluating the market for the Runt LT to determine if we will produce it. We expect to make this decision in the first half of 2024.

The Brat

Similar to the lineup of Volcon motorcycles, the Brat has a low seat height, large tires and hydraulic front and rear disc brakes. The Brat is a Class 2 eBike capable of achieving 20 mph maximum speed from throttle assistance. The Volcon app will also work with the Brat provided the rider has downloaded the app to their smartphone and has cellular connectivity. We began selling the Brat in December 2022.

Assembly and Manufacturing

We have outsourced the manufacturing of all of our vehicles to third parties. The Brat is manufactured by a supplier in China and the Grunt EVO, Runt and Stag are or will be manufactured by a supplier in Mexico. The Volcon Youth motorcycles were manufactured by Torrot in Spain.

We provide a one-year warranty on the Grunt EVO, Volcon Youth motorcycles and the Brat, and a two-year warranty on the battery pack subject to a specified number of charging cycles. We expect the warranty for our other motorcycles will be consistent with these warranties. Warranty for the Brat and Volcon Youth motorcycles is provided by the manufacturer provided that we timely submit the claim to them. The warranty for the Stag is also one year on parts and labor and two years on the battery. Certain parts will be warranted by the part manufacturer or the vehicle manufacturer whereas other parts will be warranted by the Company.

We accrue warranty reserves at the time a vehicle is delivered to the customer. Warranty reserves include our best estimate of the projected cost to repair or to replace any items under warranty, based on actual warranty experience as it becomes available and other known factors that may impact our evaluation of historical data. We review our reserves quarterly to ensure that our accruals are adequate in meeting expected future warranty obligations, and we will adjust our estimates as needed. Warranty expense is recorded as a component of cost of revenues in the statement of operations. The warranty obligation is classified as a current liability on our balance sheet.  

Sales and Marketing

Through March 15, 2024, we have 103 dealers covering 28 states. We are currently negotiating additional dealership agreements with retail partners to display and sell our vehicles and accessories. Some of these dealers will also provide warranty and repair services to our customers. Customers can also purchase the Brat and Volcon Youth motorcycles and related accessories on our website.

We anticipate our vehicles and accessories will be sold globally in a three-phase rollout of export sales– Latin American importers started in 2022, New Zealand in 2023 and Australia in 2024, subject to meeting each countries homologation requirements, if any. Export sales are expected to be executed through individual importers in each country that purchase vehicles from us by the container. Each importer is expected to sell vehicles to local dealers or directly to customers. Local dealers are intended to provide warranty and repair services for vehicles purchased within their markets.

Intellectual Property

Our success depends, at least in part, on our ability to protect our core technology and intellectual property. To accomplish this, we currently rely on a combination of trade secrets, including know-how, employee and third party non-disclosure agreements, and other contractual rights to establish and protect our proprietary rights in our technology.

Our industrial designs are protected by design patents. In addition, we intend to file for additional utility patents. There is no assurance that we will be granted any such patents. We do not know whether any patent applications will result in the issuance of patents or whether the examination process will require us to narrow our claims. Even if granted, there can be no assurance that our issued patents or new patent applications will provide us with protection.

We have registrations for the trademarks VOLCON and GRUNT in the U.S. We have also applied to register additional trademarks – including VOLCON, VOLCON BRAT, VOLCON STAG, GRUNT EVO, EMPOWERING ADVENTURE, RUNT, VOLCON RUNT, STAG, and VOLCON STAG - in the U.S., Canada, New Zealand, Australia and certain additional countries in Latin America, and many of these trademarks are now allowed or registered in these countries.  We have resolved some conflicts and potential conflicts that have arisen with regard to the use and registration of our trademarks through coexistence agreements and the submission of arguments.  We have received notice from an entity in Brazil who has opposed our applications for trademarks including the word VOLCON, but we believe the trademarks and the goods being sold under them are not similar and there is no potential for confusion. 

We have also identified that in Australia, VOLCON is similar to another trademark that does not appear to be in use. We have filed a removal application to remove the use of the other trademark so that we can use VOLCON. However, there is no guarantee that our application to remove will be accepted. Our efforts to secure trademark registrations for VOLCON and other trademarks referenced above are ongoing and we may encounter resistance from other companies, particularly as we expand into additional territories. If we receive objections from other entities and are unsuccessful in obtaining agreements or otherwise resolving the matters with these entities, we will need to consider the use of different trademarks for our Company and our products.

Competition

There are dozens of manufacturers that sell off-road motorcycles, UTVs and eBikes in the U.S. and even more globally. The markets for powersport vehicles and eBikes are highly competitive based on a number of factors, including innovation, performance, price, technology, product features, styling, fit and finish, brand recognition, quality and distribution. We believe our ability to compete successfully in these markets depends on our ability to capitalize on our competitive strengths and build brand recognition.

Many companies, which have greater financial and marketing resources than Volcon, make electric street motorcycles, including Zero Motorcycles. Some companies make electric UTVs as part of their product line. For example, Polaris has a joint venture with Zero Motorcycles to help them design dedicated electric UTVs, the first product of which began selling in 2023. Many companies, like Super 73, make and sell eBikes and have a stronger established brand name and product line.

Government regulations

We have focused on the off-road-only portion of the market because it is free of many of the homologation issues and highway certifications required to produce and sell an on-road vehicle. In some states, off-road vehicles do have legislative restrictions, but they are related to noise and exhaust emissions, two things our vehicles do not produce. 

Federal, state, and local governments have promulgated and/or are considering promulgating laws and regulations relating to the safety of our products. In the U.S., the Consumer Product Safety Commission (CPSC) has federal oversight over product safety issues related to off-road vehicles and eBikes. We believe that our products comply with all applicable CPSC safety standards as well as all other applicable safety standards in the U.S.

The assembly, use, storage, transport and disposal of battery packs is subject to extensive regulation. Complying with these requirements involves substantial costs, and any failure to do so may result in heavy fines or other restrictions on our operations. Additionally, we may be responsible for the recycling and proper disposal of expended batteries from our vehicles. We may enter into agreements with third parties to manage such recycling and disposal; however, we may be found liable for any failures in compliance by these third parties and subject to fines or remediation liabilities, which costs may be substantial.

We intend to sell and distribute our vehicles internationally through international distributors. As such, we will be subject to the local laws of each jurisdiction in which we sell our vehicles. These regulations may result in increased costs and expenses, which may materially and adversely affect our business, results of operations or financial condition.

Human Capital

Volcon Mission

People are at the core of our DNA. Our mission is to build industry leading products that connect people to outdoor experiences through the intentional blending of leading technology and design. Our vision is to amplify the powersports experience for all. Our values are building the future of powersports. Our employees recognize that everyone is someone’s customer, which is why our goal is for each employee at Volcon is to treat others as you would want to be treated.

Professional Employer Organization

Since inception through December 31, 2022, we have used professional employer organizations ("PEOs") to outsource our employee base, including processing of payroll and administration of benefits. Beginning January 1, 2023, we discontinued the use of a PEO and have hired a third party payroll processing service and a third party administrator of benefits. As of December 31, 2023, in the U.S we have 35 full-time employees and one part-time employee and we do not have any employees outside of the U.S. Currently, our employees have not chosen representation by a labor union. We also occasionally engage the services of independent contractors for special projects.

Our employees and contractors focus on customer care, developing our products, and building our marketing channels. We believe we offer competitive benefits and training programs to develop employees’ expertise, performance, and engagement, while implementing corporate policies to provide a safe, harassment-free work environment. This work environment is guided by principles of fair and equal treatment and prioritizes effective communication and employee engagement.

Employee Engagement

We are committed to building a strong culture with high levels of employee engagement. We hold quarterly all-hands and ad hoc meetings where management discusses various topics with employees including operational updates, vehicle development, financing activities, company policies and safety. Management is also committed to being available to discuss any employee concerns on a one-on-one basis. We believe that our employees are our greatest asset and are striving to consistently evaluate our progress in developing and maintaining engagement.

Available Information

Our website is at www.volcon.com. We make available, free of charge, on our corporate website, our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), as soon as reasonably practicable after they are electronically filed with the SEC. The SEC maintains an internet site that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC at www.sec.gov. Information contained on our website does not, and shall not be deemed to, constitute part of this Annual Report on Form 10-K. Our reference to the URL for our website is intended to be an inactive textual reference only.

ITEM 1A RISK FACTORS

Investing in our common stock involves a high degree of risk. You should carefully consider each of the following risks, together with all other information set forth in this Annual Report on Form 10-K, including the financial statements and the related notes, in evaluating an investment in our common stock. If any of the following risks actually occurs, our business could be harmed. In that case, the trading price of our common stock could decline, and you may lose all or part of your investment. Additional risks not presently known to us or that we currently deem immaterial may also impair our business operations.

Risks Related to the Company’s Business, Operations, and Industry

Our losses from operations could continue to raise substantial doubt regarding our ability to continue as a going concern. Our ability to continue as a going concern requires that we obtain sufficient funding to finance our operations.

To date we have funded operations through equity and debt offerings. As of December 31, 2023, we have an accumulated deficit of $120.8 million.

In February and March 2024, certain holders of the May 2023 Convertible Notes issued in May 2023 converted approximately $7.4 million of principal to common stock. In March 2024, the holders exchanged the remaining May 2023 Convertible Notes of $24.7 million for Series A convertible preferred stock with a $1,000 per share value and an initial conversion price of $1.33 per share for common stock. All covenants from the Convertible Notes were terminated upon this exchange. In March 2024, certain holders of the Series A convertible preferred stock converted $2.3 million shares to 1.7 million shares of common stock.

Management anticipates that our cash on hand as of December 31, 2023 plus the cash expected to be generated from operations will not be sufficient to fund planned operations and maintain required cash balances for the Convertible Notes beyond one year from the date of the issuance of the financial statements as of and for the year ended December 31, 2023. There can be no assurance that we will not require additional funding to support our operations. There can be no assurance that such additional funding, if needed, would be available to the Company on acceptable terms, or at all. These factors raise substantial doubt regarding our ability to continue as a going concern.

The material weaknesses in our internal control over financial reporting identified in our 2020 audit have not been remediated. If we are unable to remediate these material weaknesses or we or our auditor identify additional material weaknesses in the future or otherwise fail to maintain an effective system of internal controls, we may not be able to accurately or timely report our financial condition or results of operations, which may adversely affect our business and stock price.

The material weaknesses identified by our independent registered public accounting firm in our internal control over financial reporting in our 2020 audit have not been remediated as of December 31, 2023. A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of our annual or interim consolidated financial statements will not be prevented or detected on a timely basis. These material weaknesses are as follows:

In addition to hiring more finance and accounting personnel in 2021 to improve our segregation of duties, through 2023, we have made further progress towards remediating these material weaknesses. We have hired more experienced accounting and finance personnel. We have prepared some formal written policies and procedures for accounting, IT, and financial reporting and record keeping. We have also started the process of documenting our internal controls. However, we have not fully completed documentation or testing of these policies, procedures, and internal controls.

While we believe these efforts have improved the internal control over financial reporting during 2023, they did not fully remediate the material weaknesses as we have not fully documented all of our policies or procedures and we have not performed any testing of our internal controls.

We cannot assure you that the measures we have taken to date and may take in the future, will be sufficient to remediate the control deficiencies that led to our material weaknesses in internal control over financial reporting or that they will prevent or avoid potential future material weaknesses. The effectiveness of our internal control over financial reporting is subject to various inherent limitations, including cost limitations, judgments used in decision making, assumptions about the likelihood of future events, the possibility of human error and the risk of fraud. If we are unable to remediate the material weakness, our ability to record, process and report financial information accurately, and to prepare financial statements within the time periods required of public companies could be adversely affected which, in turn, may adversely affect our reputation and business and the market price of our common stock. In addition, any such failures could result in litigation or regulatory actions by the SEC or other regulatory authorities, loss of investor confidence, delisting of our securities and harm to our reputation and financial condition, or diversion of financial and management resources from the operation of our business.

Our transition to an outsourced manufacturing, design and development business model may not be successful, which could harm our ability to deliver products and recognize revenue.

In March 2022, we signed an agreement with a manufacturer in China to develop and manufacture the Brat, our first eBike. We provided this vendor with our specifications and design drawings, and they developed prototypes and the manufacturing process to build the Brat at a cost that was acceptable to us. We launched the Brat in December 2022 and have sold the Brat throughout 2023 and expect to continue to sell the Brat in 2024.

In June 2022, we signed a distribution agreement with Torrot Electric Europa, S.A. (“Torrot”) to distribute their youth motorcycles through our LATAM distributors. In October 2022, we signed an exclusive distribution and co-branding agreement with Torrot, which replaces the original distribution agreement and allows Volcon to co-brand Torrot’s youth motorcycles using the Volcon name and branding in the U.S. and Latin America. This was expanded to Canada through a separate agreement signed in December 2022. These products are manufactured by Torrot in Spain. Due to lower than expected sales of youth motorcycles, in 2023 we have written down our inventory of these motorcycles to its estimated net realizable value and recorded an expense of $2.7 million. In December 2023 we notified Torrot that we want to terminate this agreement and we will liquidate any remaining Volcon Youth motorcycle inventory. We have agreed to give Torrot a total of 1,000 Volcon branded Torrot motorcycles originally purchased for $1.8 million, an up front payment of $370,000 and an additional $1.7 million to be paid out at $100,000 over 17 months beginning in April 2024 in exchange for unfulfilled 2023 and 2024 unit purchases.

In 2022 we entered into a manufacturing agreements with GLV Ventures (“GLV”) to produce the Grunt and Grunt EVO, as well as the Stag and the Runt and we have transitioned from a manufacturing model in which we manufactured and assembled the Grunt at our manufacturing facility located in Round Rock, Texas, to one where we rely on this third party manufacturer to build the Grunt EVO, Stag and, if we decide to build the Run, in Mexico.

As a result of moving to an outsourced design, development and manufacturing model, we have reduced headcount in all departments to reduce costs. We continue to evaluate further cost reductions while developing our sales and marketing team to sell and promote our products to customers in the U.S and to our international distributors.

We rely on third party manufacturers, designers and developers, which subjects us to risk of product delivery delays, reduced control over product costs and quality control.

Our business success will depend in large part on our third party vendors’ ability to economically produce our vehicles at sufficient capacity to meet the demands of our customers.

Our reliance on third parties for the manufacture, design and development of our vehicles exposes us to a number of risks which are outside our control, including:

Our reliance on third parties reduces our control over the manufacturing, design and development processes, including reduced control over timing to release products, quality, product costs and product supply. We have experienced delays in the design and development of the Stag due to mechanical and electrical components that failed or did not operate as expected. Significant time and development effort was required to address these issues which resulted in significant delays in releasing the Stag. The first Stag unit was shipped to a customer in February 2024. We can provide no assurance that we will not realize future delays in production, and until we have multiple manufacturers or manufacture our products internally, our ability to release products on the timeline we expect will be dependent on our current outside manufacturers.

If any of our third party vendors suffer interruptions, experience delays in shipments or issues concerning product quality, supply chain or disruptions, including by reason of natural disasters, work stoppages or capacity constraints, our ability to ship products to dealers and our international distributors would be delayed. Additionally, if any of our third party vendors experience quality control problems in their operations, we could be required to cover the repair or replacement of any defective products. These delays or product quality issues could have an immediate and material adverse effect on our ability to fulfill orders and could have a negative impact on our operating results. In addition, such delays or issues with product quality could harm our reputation and our relationship with our dealers, distributors and customers.

Our third party manufacturers may be unable to meet our growing sales and delivery plans, which could harm our business and prospects.

Our sales growth and delivery plan contemplate achieving and sustaining increases in vehicle deliveries. Our ability to achieve this plan depends upon several factors, including our ability to identify third party manufacturers who can meet our forecasted demand while maintaining our desired quality levels and optimize design and product changes. Although we believe that the third party manufacturers we have contracted with have the ability to meet our forecasted demand, there is no assurance that they will be successful in these efforts. In addition, as we do not have a long-term history of sales, our forecasted demand may be materially incorrect, which could cause us to fail to meet unforeseen demand and incur higher costs for excess inventory purchased to meet our forecast. If we are unable to realize our sales and delivery plan, our brand, business, prospects, financial condition, and operating results could be materially damaged.

We are dependent on our third party manufacturers, who are dependent on their suppliers, some of which could be single-source suppliers. The inability of these suppliers to deliver necessary components for our vehicles according to our schedule and at prices, quality levels and volumes acceptable to us, or our inability to efficiently manage these third party manufacturers and their suppliers has in the past and could in the future have a material adverse effect on our financial condition and operating results.

Our vehicles contain numerous purchased parts that our third party manufacturers either (a) source globally from direct suppliers, some of whom could be single-source suppliers, or (b) manufacture themselves from components or materials. Any significant unanticipated demand would require our third party manufacturers to procure or manufacture additional components in a short amount of time. While we believe our third party manufacturers would be able to secure additional or alternate sources of supply for most of our components and raw materials in a relatively short time frame, there is no assurance that they will be able to do so or develop their own replacements for certain highly customized components of our products. We have in the past realized production delays due to delays in sourcing certain parts from single-source suppliers. We can provide no assurance that we will not in the future realize additional such delays.

If our third party manufacturers encounter unexpected difficulties with key suppliers, and if they are unable to fill these needs from other suppliers, we could experience production delays and potential loss of access to important technology and parts for producing, servicing and supporting our vehicles. This limited, and in many cases single-source, supply chain exposes our third party manufacturers and us to multiple potential sources of delivery failure or component shortages for the production of our vehicles. The loss of any single or limited source supplier or the disruption in the supply of components from these suppliers could lead to design changes and delays in product deliveries to our customers, which could hurt our relationships with our customers and result in negative publicity, damage to our brand and reputation, and a material and adverse effect on our business, prospects, financial condition and operating results.

Our third party manufacturers operate outside of the U.S., subjecting us to risks of international operations.

Our third party manufacturers operate outside of the U.S. and as a result we are increasingly exposed to the challenges and risks of doing business outside the U.S., which could reduce our revenues or profits, increase our costs, result in significant liabilities or sanctions, or otherwise disrupt our business. These challenges include: (1) compliance with complex and changing laws, regulations and policies of governments that may impact our operations, such as foreign ownership restrictions, import and export controls, tariffs, and trade restrictions; (2) compliance with U.S. and foreign laws that affect the activities of companies abroad, such as anti-corruption laws, competition laws, currency regulations, and laws affecting dealings with certain nations; (3) the difficulties involved in managing an organization doing business in many different countries; (4) uncertainties as to the enforceability of contract and intellectual property rights under local laws; and (5) rapid changes in government policy, political or civil unrest, acts of terrorism, or the threat of international boycotts or U.S. anti-boycott legislation.

Products that we have manufactured for us in Mexico and China may also be subject to any uncertainty of trade relations between such countries and the U. S., which could cause the cost of our products manufactured there to rise, or result in our inability to continue to use third party manufacturers in such country, resulting in a need to find alternative sources of manufacture, which could result in the delay of manufacture and supply of our products, increase our cost of manufacture, and cause a delay in our shipments to customers and a delay or cancellation of orders. Our future operating results and financial condition could be materially affected to the extent any of these actions occur.

In addition, the prosecution of intellectual property infringement and trade secret theft outside of the U.S. may be more difficult than in the U.S. Although we take precautions to protect our intellectual property, using our third party manufacturers in Mexico and China could subject us to an increased risk that unauthorized parties will be able to copy or otherwise obtain or use our intellectual property, and we may be unsuccessful in monitoring and enforcing our intellectual property rights against them, which could harm our business. We may also have limited legal recourse in the event we encounter patent or trademark infringers, which could adversely affect our business, results of operations, and financial condition. While we take measures to protect our trade secrets, the use of third party manufacturers may also risk disclosure of our innovative and proprietary manufacturing methodologies, which could adversely affect our business.

We are utilizing a small number of vendors to assist us with the manufacturing, development and design of our vehicles, including the chassis, electrical systems, safety requirements, body components and accessories, and the inability of these vendors to complete our respective design requirements may delay our ability to release these vehicles for production, which could have a material adverse effect on our financial condition and operating results.

We have entered into manufacturing, design and development agreements with vendors with experience in the manufacturing, design and development of two-wheel and four-wheel off-road vehicles to assist us with the development of certain aspects of and manufacturing of our vehicles. Although these vendors have successfully assisted other companies with manufacture, design and development of vehicles, they may not be able to successfully design, develop and manufacture our vehicles. These vendors may experience delays in fulfilling their obligations under these contracts due to the inability to source parts from other vendors, lack of employees available to work on our projects due to labor shortages or other competing projects from other customers or COVID-19-related issues impacting employees. Failure of these vendors to complete the contracted design, development and manufacture projects for our vehicles will result in delays in obtaining regulatory approvals and delay production and release of the vehicles for sale, which could have a material adverse effect on our business, reputation, results of operations or financial condition.

Increases in costs, disruption of supply, or shortage of materials could harm our business.

Our third party manufacturers may experience increases in the cost or a sustained interruption in the supply or shortage of materials. Any such increase, supply interruption or shortage could materially and negatively impact our business, prospects, financial condition and operating results. The prices for these materials fluctuate, and their available supply may be unstable, depending on market conditions and global demand for these materials, including as a result of increased production of electric vehicle (EV) products by our competitors, and could adversely affect our business and operating results. For instance, we are exposed to multiple risks relating to battery packs.

These risks include:

Our business is dependent on the continued supply of battery cells for the battery packs used in our vehicles. Any disruption in the supply of battery cells, including those caused by the conflict between Russia and the Ukraine and sanctions imposed on Russia noted below, could disrupt production of our vehicles. Substantial increases in the prices charged to us, such as those charged by battery cell suppliers, would increase our operating costs, and could reduce our margins if we cannot recoup the increased costs through increased selling prices of our vehicles. Any attempts to increase prices in response to increased material costs could result in the cancellation of vehicle orders and therefore materially and adversely affect our brand, image, business, prospects and operating results.

We have and could continue to experience delays and other complications in the design, manufacture, launch and production ramp of our vehicles and our future planned vehicles, which could harm our brand, business, prospects, financial condition and operating results.

We have encountered unanticipated challenges, such as supply chain constraints, that led to initial delays in producing our vehicles. We have experienced longer lead times with certain suppliers to obtain parts, especially those imported where shipping delays from outbound and inbound ports have caused delays or required us to use air freight and incur higher shipping costs. We have outsourced the manufacturing of all of our vehicles and plan to outsource all manufacturing of our vehicles for the foreseeable future. We also reduced headcount in all our departments, as we have outsourced the design and development of our vehicles. Any significant delay or other complications in the production of our vehicles or the development, manufacture, and production ramp of our future vehicles, including complications associated with our third party manufacturers’ supply chains or obtaining or maintaining regulatory approvals, and/or coronavirus impacts, could materially damage our brand, business, prospects, financial condition and operating results.

We are an early-stage company and we have delivered a limited number of vehicles to customers.

We have delivered a limited number of vehicles to customers and we have no meaningful historical financial data upon which we may base our projected revenue and operating expenses. Our limited operating history makes it difficult for potential investors to evaluate our products or prospective operations and business prospects. We are subject to all the risks inherent in business development, financing, unexpected expenditures, and complications and delays that often occur in a new business. Investors should evaluate an investment in us in light of the uncertainties encountered by developing companies in a competitive environment. There can be no assurance that our efforts will be successful or that we will ultimately be able to attain profitability.

The conflict with Russia and the Ukraine could have an impact on the availability of components used in the manufacturing of lithium ion batteries that we use to power our vehicles.

The recent conflict between Russia and the Ukraine could impact the availability of nickel, an element used in the production of lithium ion cells used in batteries that power our vehicles. According to the Wall Street Journal, Russia produces 5%-6% of the world’s nickel supply and 17% of the high purity nickel production. The shortage of these cells could have an impact on our ability to produce vehicles to meet our customers’ demands. In addition, sanctions against Russia could impact the price of elements, including nickel, that are used in the production of batteries which would result in higher costs to produce our vehicles. These sanctions have also impacted the U.S. and global economy and could result in an economic recession which could cause a broader disruption to the Company’s supply chain and distribution network and customer demand for our products. These factors would have a negative impact on our results of operations and cash flows.

We are currently taking orders for the Brat Ebike, Grunt EVO and Volcon Youth motorcycles and the Stag UTV, and if these vehicles fail to perform as expected, our reputation could be harmed and our ability to develop, market and sell our vehicles could be harmed.

If our vehicles were to contain defects in design and manufacture that cause them not to perform as expected or that require repair or take longer than expected to deliver, our ability to develop, market and sell our vehicles could be harmed. While we intend to perform internal testing on the vehicles, as a start-up company our frame of reference by which to evaluate detailed long-term quality, reliability, durability and performance characteristics of our vehicles is based on industry metrics rather than historical data. Although we have procedures to test all of our vehicles for defects, there can be no assurance that we will be able to detect and fix all defects in our products prior to their sale to consumers. Any product defects, delays, or other failure of our products to perform as expected could harm our reputation and result in delivery delays, product recalls, product liability claims, significant warranty and other expenses, and could have a material adverse impact on our business, financial condition, operating results and prospects. 

We may not succeed in establishing, maintaining and strengthening our brand, which could materially and adversely affect customer acceptance of our products, which could in turn materially affect our business, results of operations or financial condition.

Our business and prospects heavily depend on our ability to develop, maintain and strengthen the Volcon brand. If we are unable to establish, maintain and strengthen our brand, we may lose the opportunity to build and maintain a critical mass of customers. Our ability to develop, maintain and strengthen our brand will depend heavily on the success of our marketing efforts. Failure to develop and maintain a strong brand would materially and adversely affect customer acceptance of our vehicles, could result in suppliers and other third parties being less likely to invest time and resources in developing business relationships with us, and could materially adversely affect our business, results of operations or financial condition.

An adverse determination in any significant product liability claim against us could materially adversely affect our business, results of operations or financial condition.

The development, production, marketing, sale and usage of our vehicles will expose us to significant risks associated with product liability claims. The powersports vehicles industry in particular is vulnerable to significant product liability claims, and we may face inherent risk of exposure to claims in the event our vehicles do not perform or are claimed to not have performed as expected. If our products are defective, malfunction or are used incorrectly by our customers, it may result in bodily injury, property damage or other injury, including death, which could give rise to product liability claims against us. Any losses that we may suffer from any liability claims and the effect that any product liability litigation may have upon the brand image, reputation and marketability of our products could have a material adverse impact on our business, results of operations or financial condition. No assurance can be given that material product liability claims will not be made in the future against us, or that claims will not arise in the future in excess or outside of our insurance coverage and contractual indemnities with suppliers and manufacturers. We believe we have adequate product liability insurance; however, as we release new products and expand our sales channels, we may not be able to obtain adequate product liability insurance or the cost of doing so may be prohibitive. Adverse determinations of material product liability claims made against us could also harm our reputation and cause us to lose customers and could have a material adverse effect on our business, results of operations or financial condition.

The markets in which we operate are in their infancy and highly competitive, and we may not be successful in competing in these industries as the industry further develops. We currently face competition from new and established competitors and expect to face competition from others in the future, including competition from companies with new technology.

The EV market is in its infancy, and we expect it will become more competitive in the future. There is no assurance that our vehicles will be successful in the respective markets in which they compete. A significant and growing number of established and new companies have entered or are reported to have plans to enter the EV market, including the off-road market that we intend to pursue. Most of our current and potential competitors have significantly greater financial, technical, manufacturing, marketing, sales networks, and other resources than we do and may be able to devote greater resources to the design, development, manufacturing, distribution, promotion, sale and support of their products. Increased competition could result in lower vehicle sales, price reductions, revenue shortfalls, loss of customers and loss of market share, which could harm our business, prospects, financial condition, and operating results.

We may need to defend ourselves against intellectual property infringement claims, which may be time-consuming and could cause us to incur substantial costs.

Others, including our competitors, may hold or obtain patents, copyrights, trademarks or other proprietary rights that could prevent, limit or interfere with our ability to make, use, develop, sell or market our products and services, which could make it more difficult for us to operate our business. From time to time, the holders of such intellectual property rights may assert their rights and may bring suits alleging infringement or misappropriation of such rights. In addition, if we are determined to have infringed upon a third party’s intellectual property rights, we may be required to cease making, selling or incorporating certain components or intellectual property into the products we offer, to pay substantial damages and/or license royalties, to redesign our products, and/or to establish and maintain alternative branding for our products.

We have registrations for the trademarks VOLCON and GRUNT in the U.S. We have also applied to register additional trademarks – including VOLCON, VOLCON BRAT, VOLCON STAG, GRUNT EVO, EMPOWERING ADVENTURE, RUNT, VOLCON RUNT, STAG, and VOLCON STAG - in the U.S., Canada, New Zealand, Australia and certain additional countries in Latin America, and many of these trademarks are now allowed or registered in these countries.  We have resolved some conflicts and potential conflicts that have arisen with regard to the use and registration of our trademarks through coexistence agreements and the submission of arguments.  We have received notice from an entity in Brazil who has opposed our applications for trademarks including the word VOLCON, but we believe the trademarks and the goods being sold under them are not similar and there is no potential for confusion.

We have also identified that in Australia, VOLCON is similar to another trademark that does not appear to be in use. We have filed a removal application to remove the use of the other trademark so that we can use VOLCON. However, there is no guarantee that our application to remove will be accepted. Our efforts to secure trademark registrations for VOLCON and other trademarks referenced above are ongoing and we may encounter resistance from other companies, particularly as we expand into additional territories. If we receive objections from other entities and are unsuccessful in obtaining agreements or otherwise resolving the matters with these entities, we will need to consider the use of different trademarks for our Company and our products.

In the event that we were required to take one or more such actions, our business, prospects, operating results and financial condition could be materially adversely affected. In addition, any litigation or claims, whether or not valid, could result in substantial costs, negative publicity and diversion of resources and management attention.

Potential tariffs or a global trade war could increase our costs and could further increase the cost of our products, which could adversely impact the competitiveness of our products and our financial results.

The Grunt EVO, Runt LT (if we decide to begin production) Brat depend on materials from China, namely batteries, which are among the main components of our vehicles. In addition, components for the Stag, mainly wiring harnesses, are also sourced from China. We cannot predict what actions may be taken with respect to tariffs or trade relations between the U.S. and China, what products may be subject to such actions, or what actions may be taken by China in retaliation. The adoption and expansion of trade restrictions, the occurrence of a trade war, or other governmental action related to tariffs, trade agreements or related policies have the potential to adversely impact our supply chain and access to equipment, our costs and our product margins. Any such cost increases or decreases in availability could slow our growth and cause our financial results and operational metrics to suffer.

We primarily sell our vehicles and accessories through a network of third parties, and there is no assurance that we will be able to successfully build out this network.

As of March 15, 2024, we have 103 active dealers to sell our vehicles and accessories. In 2022 we hired our first regional sales manager in Canada to begin developing our dealer network for Canadian powersports vehicle dealers but in 2023 we determined we would defer selling our products in Canada and as of December 31, 2023 and we no longer have any Canadian employees.

We are required to comply with manufacture/dealer laws in each state in which we sell our vehicles through dealers. Dealer laws vary by state and although our dealer agreements are intended to comply with these laws, we may be required to amend our agreements if these laws are changed or are challenged by dealers or other OEMs. Our dealer and distribution agreements are generally short-term in nature and the dealer, distributor or we may cancel these agreements under certain circumstances and we may not be able to retain or expand the scope of our dealer and/or distribution network in the future.

We have entered into an accounts receivable factoring arrangement to allow the Company the ability to generate cash for working capital. We will incur financing costs under this arrangement. On a longer term basis we intend to obtain a “flooring” financing arrangement to allow financing sources for our dealers to purchase vehicle inventory. We may incur costs to incentivize dealers to buy our vehicles including free dealer financing for certain periods or based on purchase volumes, interest rate buydowns on the dealers’ customer financing to incentivize their customers’ purchase of our vehicles. Because we are a young company with limited sales history and recurring losses, we may not be able to obtain these inventory financing sources which may result in dealers not wanting to sell our vehicles.

In the U.S., we began to sell the Brat and Volcon youth motorcycles on our website in 2023, in addition to our dealer network and bicycle retailers. Customers can request that these vehicles be delivered to a local Volcon dealer or directly to a location they can designate. We do not intend to compete with dealers who sell these products and we provide for price protection to them in the event we are selling these products below the retail price they are selling them for in order for them to maintain their margin.

We also sell our vehicles and accessories internationally through international distributors. As of December 31, 2023, we have signed distribution agreements with six distributors in Latin America, one distributor in New Zealand and one distributor in the Caribbean region and in January 2024 we signed an agreement with a distributor in Australia. We are relying on these distributors to market, promote, sell and service our vehicles and sell accessories in their designated countries/territories.

We believe our success will be highly dependent on our ability to build out this network in the major markets in which we intend to compete for customers, and to maintain this network in the future. Our business model is dependent not only on our ability to create the foregoing network, but also on the commitment and motivation of these third parties to promote our brand and products.

Orders for vehicles are cancelable and there can be no assurance that all orders will result in revenue being recognized.

Orders from U.S. dealers do not require an upfront payment and are cancelable prior to shipment with no penalty. Orders from U.S. consumers for the Stag required a minimal reservation fee and all orders are cancelable prior to shipment, although the reservation fee is forfeited unless it must be refunded in accordance with state laws. Most importers must pay for orders in advance of shipment but can cancel an order prior to shipment and receive a refund without penalty.

The estimated fulfillment of all orders we have received assumes our third party manufacturers can successfully increase their production capacity in the future, of which there is no assurance. If we are unable to satisfy pending orders on a timely basis, customers may cancel their orders.

In some cases, there will be significant time between a customer ordering a vehicle and the eventual delivery of the vehicle, which creates a heightened risk that a customer that ordered a vehicle may change his or her mind and not ultimately take delivery of the vehicle, and accessories, if purchased, in their order. Any cancellations could harm our financial condition, business, prospects and operating results.

We may be unable to improve our existing products and develop and market new products that respond to customer needs and preferences and achieve market acceptance.

We may not be able to compete as effectively with our competitors, and ultimately satisfy the needs and preferences of our customers, unless we can successfully enhance current products, develop new innovative products, maintain or lower product costs and distinguish our products from our competitors’ products through innovation and design. Product development requires significant financial, technological, and other resources. There can be no assurance that we will be able to incur a level of investment in research and development that will be sufficient to successfully make us competitive in product innovation and design. In addition, even if we are able to successfully enhance existing products and develop new products, there is no guarantee that the markets for our existing products and new products will progress as anticipated. If any of the markets in which our existing products compete do not develop as expected, our business, results of operations or financial condition could be materially adversely affected.  

We have limited experience servicing our vehicles, we intend to primarily utilize third parties to service our vehicles, and if we are unable to address the service requirements of our customers, our business could be materially and adversely affected.

We have limited experience servicing or repairing our vehicles and we are developing our service manuals and service procedures to repair our vehicles. We are in the process of developing a network of service providers who will also be our dealers as many states require that only dealers can provide warranty service on vehicles. For our international distributors, they will be service providers or will identify third parties who will be service providers to service our vehicles.

Servicing electric vehicles is different from servicing vehicles with internal combustion engines and requires specialized skills, including high voltage training and servicing techniques. If we are unable to successfully address the service requirements of our customers, our business and prospects will be materially and adversely affected. If we are unable to successfully address the servicing requirements of our customers or establish a market perception that we maintain high-quality support, our reputation could be harmed, we may be subject to claims from our customers, and our business, results of operations or financial condition may be materially and adversely affected.

Significant product repair and/or replacement due to product warranty claims or product recalls could have a material adverse impact on our business, results of operations or financial condition.

We provide a one-year warranty against defects for the Grunt EVO, Brat and Volcon youth motorcycles and a two-year warranty on the battery. The manufacturers of the Brat and Volcon youth motorcycles provide the warranty for these products and we are reimbursed for warranty claims provided we obtain approval of the claim from the manufacturer.

We currently expect to provide a similar warranty the Runt LT when it is released for sale. Our warranty for the Stag is also one-year against defects and two years for the batteries. Our warranty will generally require us to repair or replace defective products during such warranty periods at no cost to the consumer. Some of the parts are warrantied by the part manufacturer where others are no. We record provisions based on an estimate of product warranty claims, but there is the possibility that actual claims may exceed these provisions and therefore negatively impact our results of operations of financial condition.

In addition, we may in the future be required to make product recalls or could be held liable in the event that some of our products do not meet safety standards or statutory requirements on product safety, even if the defects related to any such recall or liability are not covered by our limited warranty. The repair and replacement costs that we could incur in connection with a recall could have a material adverse effect on our business, results of operations or financial condition. Product recalls could also harm our reputation and cause us to lose customers, particularly if recalls cause consumers to question the safety or reliability of our products, which could have a material adverse effect on our business, results of operations or financial condition.

Our success is dependent upon the success of the off-road vehicle industry and upon consumers’ willingness to adopt electric vehicles.

Our success is dependent upon the success of the off-road vehicle industry as a whole, and in particular upon consumers’ willingness to adopt electric vehicles as an alternative to combustion vehicles. If the market for electric off-road vehicles does not develop at the rate or in the manner or to the extent that we expect, our business, results of operations or financial condition may be adversely materially affected. The market for electric vehicles is relatively new, rapidly evolving, characterized by rapidly changing technologies, price competition, additional competitors, evolving government regulation and industry standard, frequent new vehicle announcements and changing consumer demands and behaviors. Factors that may influence the adoption of electric vehicles include:

The influence of any of the factors described above may cause our customers not to purchase our vehicles and may otherwise materially adversely affect our business, results of operations or financial condition.

Higher inflation and interest rates, volatile financial markets, unemployment and consumer confidence may cause consumers to defer or not purchase our products.

Globally inflation and interest rates rose in 2023 compared to 2022 and could continue to rise or remain at current levels in the future. Our vehicles represent a discretionary purchase. Many consumers finance the purchase of an off-road vehicle and higher interest rates will result in higher monthly payments which some consumers may not qualify for or consumers may elect to defer their purchase until interest rates decline.

In addition, global financial markets overall have seen significant volatility in 2023 and could continue to experience volatility in the future and could decline. A number of large companies have announced layoffs. Public companies in the EV sector have seen significant declines and volatility in 2023. Consumer confidence in the U.S. has declined.

The influence of any of the factors described above may cause our customers not to purchase our vehicles and may otherwise materially adversely affect our business, results of operations or financial condition.

We currently operate in an area of the vehicle sector that is not heavily regulated, and future changes in government oversight may subject us to increased regulations, which may increase our expenses.

The off-road vehicle market is not heavily regulated, as compared to on-road vehicles, and, as such, we are not currently subject to significant government regulations. As this market develops and grows, it may come under increased regulatory scrutiny, which may result in increased regulations. This increase in regulations may result in increased costs and expenses, which may materially and adversely affect our business, results of operations or financial condition.

We could be negatively impacted by cybersecurity attacks and are subject to evolving privacy laws in the U.S. and other jurisdictions that could adversely impact our business and require that we incur substantial costs.

We use a variety of information technology systems in the ordinary course of business, which are potentially vulnerable to unauthorized access, computer viruses, ransomware software viruses and other similar types of malicious activities and cyber-attacks, including cyber-attacks to our information technology infrastructure and attempts by others to gain access to our proprietary or sensitive information, and ranging from individual attempts to advanced persistent threats. Additionally, our vendors and potentially our customers, such as federal, state and local governments, require us to maintain and protect our information technology infrastructure to specified standards in order to protect not only our sensitive information, but also their sensitive information. Further, ransomware attacks are becoming increasingly prevalent and severe. To alleviate the financial, operational, and reputational impact of a ransomware attack, it may be preferable to make extortion payments, but we may be unwilling or unable to do so, including, for example, if applicable laws or regulations prohibit such payments. The procedures and controls we use to monitor these threats and mitigate our exposure may not be sufficient to prevent cybersecurity incidents. The results of these incidents could include misstated financial data, theft of trade secrets or other intellectual property, liability for disclosure of confidential customer, supplier or employee information, increased costs arising from the implementation of additional security protective measures, litigation and reputational damage, which could materially adversely affect our financial condition, business or results of operations. Any remedial costs or other liabilities related to cybersecurity incidents may not be fully insured or indemnified by other means. Moreover, we or our third party vendors or business partners may be more vulnerable to such attacks in remote work environments, which have increased in response to the COVID-19 pandemic. Additionally, security breaches could result in a violation of applicable U.S. and international privacy and other laws and subject us to governmental investigations and proceedings, which could result in our exposure to material civil or criminal liability. 

Risks Related to our Common Stock

In March 2024, we exchanged our outstanding convertible notes for Preferred Stock and a significant number of shares of common stock could be issued upon conversion.

In March 2024, we issued Series A Preferred Stock (the “Preferred Stock”) at $1,000 per share in exchange for $24.7 million principal of convertible notes. The initial conversion price for the Preferred Stock is $1.33 and is convertible at any time. On March 5, 2024, certain holders of the Preferred Stock converted approximately $2.3 million for approximately 1.7 million shares of common stock. The total number of shares of common stock that could be issued as of March 27, 2024 for the outstanding Preferred Stock on this date is approximately 16.8 million shares. The conversion price of the Preferred Stock is subject to adjustment if certain events such as a stock split, reverse stock split, or stock dividend occurs, or if we issue equity or convertible instruments at offering prices below the conversion price. In addition, in the event of a change of control or sale of substantially all of the Company’s assets, the Preferred Stock agreement provides for distributions that are either based on the number of common stock shares issuable under these agreements or based on other valuations as defined in the agreement.

The Preferred Stock holders may resell all, or some of the shares of common stock underlying the Preferred Stock after conversion, at any time or from time to time at their discretion. Resales of our common stock may cause the market price of our securities to drop significantly, regardless of the performance of our business. The adjustment of the conversion price for the Preferred Stock held by these investors based on the price of future issuances of securities could also limit our ability to raise capital as potential investors may not make an investment in a new issuance of securities if their investment could be immediately diluted due to adjustments in the conversion price or warrant exercise prices.

We have issued Series B warrants in connection with the public offering completed in November 2023 that have provisions that can increase the number of warrants and reduce the exercise price if we complete certain transactions.

Our public offering completed in November 2023 included Series A and Series B warrants (“Series A Warrants” and “Series B Warrants”) to purchase our common stock with initial exercise prices of $24.75 and $37.80, respectively. As of March 27, 2023, approximately 42,000 and 14.5 million Series A Warrants and Series B Warrants, respectively, remain outstanding and the Series A Warrants have an exercise price of $1.8636 and the Series B Warrants have an exercise price of $0.9059. Series A Warrants may be exercised on an alternative cash basis where each warrant exercised will result in the Company issuing three shares of common stock.

The Series B Warrants provide, subject to certain exemptions, that if we sell or issue, any common stock or convertible securities, at an effective price per share less than the exercise price of the Series B Warrant then in effect, or a Dilutive Issuance, the exercise price of the Series B Warrant will be reduced to an amount equal to the lowest daily volume weighted average price (“VWAP”) during the period commencing five consecutive trading days following the Dilutive Issuance and the number of shares issuable upon exercise of the Series B Warrant shall be proportionally adjusted so that the aggregate exercise price of the Series B Warrant shall remain unchanged.

Further, if at any time on or after the date of issuance there occurs any share split, share dividend, share combination, recapitalization or other similar transaction involving our common stock and the lowest daily VWAP during the five consecutive trading days prior to the date of such event and the five consecutive trading days after the date of such event is less than the exercise price then in effect, then the exercise price shall be reduced to the lowest daily VWAP during such period and the number of warrant shares issuable shall be increased such that the aggregate exercise price payable thereunder, after taking into account the decrease in the exercise price, shall be equal to the aggregate exercise price on the date of issuance.

As a result of the 1 for 45 reverse stock split we completed on February 5, 2024, the exercise price of approximately 15.8 million Series B Warrants were reset to $1.8646 based on the lowest VWAP over the course of the five day trading period through February 12, 2024 and the new amount of Series B Warrants as of this date became approximately 7.1 million.

As a result of the exchange of the Convertible Notes for Preferred Stock (convertible at $1.33 per share of common stock) in March 2024 noted above, the exercise price of the Series B warrants adjusted to $0.91 per share based on the lowest VWAP in the five day trading period through March 12, 2024 and the total number of Series B Warrants adjusted to approximately 14.5 million.

Further adjustments to the Series B Warrant exercise price and number of warrants may occur if we complete any additional transactions or complete another reverse stock split per the terms of the Series B Warrants.

Although some of the holders of Series A and Series B Warrants have ownership limitations, if and when we do issue shares of common stock to holders of the Series A Warrants and Series B Warrants upon the exercise by the holder, such stockholders may resell all, some or none of those shares of common stock at any time or from time to time at their discretion. Resales of our common stock may cause the market price of our securities to drop significantly, regardless of the performance of our business.

Your ownership may be diluted if additional capital stock is issued to raise capital, to finance our operations, to complete acquisitions or in connection with strategic transactions.

We will need to raise additional funds to finance our operations, to complete acquisitions or to develop strategic relationships by issuing equity or convertible debt securities, which would reduce the percentage ownership of our existing stockholders. Our board of directors has the authority, without action or vote of the stockholders, to issue all or any part of our authorized but unissued shares of common or preferred stock. Our certificate of incorporation authorizes us to issue up to 250,000,000 shares of common stock and 5,000,000 shares of preferred stock. Future issuances of common or preferred stock would reduce your influence over matters on which stockholders vote and would be dilutive to earnings per share. In addition, any newly issued preferred stock could have rights, preferences and privileges senior to those of the common stock. Those rights, preferences and privileges could include, among other things, the establishment of dividends that must be paid prior to declaring or paying dividends or other distributions to holders of our common stock or providing for preferential liquidation rights. These rights, preferences and privileges could negatively affect the rights of holders of our common stock, and the right to convert such preferred stock into shares of our common stock at a rate or price that would have a dilutive effect on the outstanding shares of our common stock.

If our stock price fluctuates, you could lose a significant part of your investment.

Since our initial public offering through March 27, 2024 our share price has fluctuated from a high of $3,933.00 to a low of $0.565, (as adjusted for the 1 for 5 and 1 for 45 reverse stock splits completed in October 2023 and February 2024, respectively) and closed at $0.68 on March 27, 2024. The market price of our common stock is subject to wide fluctuations in response to, among other things, the risk factors described in this filing and other factors beyond our control, such as fluctuations in the valuation of companies perceived by investors to be comparable to us. Furthermore, the stock markets have experienced price and volume fluctuations that have affected and continue to affect the market prices of equity securities of many companies. These fluctuations often have been unrelated or disproportionate to the operating performance of those companies. These broad market and industry fluctuations, as well as general economic, political, and market conditions, such as recessions, interest rate changes or international currency fluctuations, may negatively affect the market price of our common stock. In the past, many companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We may be the target of this type of litigation in the future. Securities litigation against us could result in substantial costs and divert our management’s attention from other business concerns, which could seriously harm our business.

We are party to certain agreements with a founder of the Company and certain executive officers that may create a conflict of interest for our board of directors in evaluating a potential change of control transaction.

We had previously entered into a consulting agreement Highbridge Consultants, LLC (“Highbridge”), an entity controlled by Mr. Adrian James, who is a former member of our board of directors and current stockholder, pursuant to which Mr. James would provide us with services. Pursuant to the consulting agreements, upon the occurrence of a Fundamental Transaction (as contemplated by such agreement), which generally includes a business combination, merger, or sale of all or substantially all of our assets (or similar events), for an aggregate gross sales price of $100.0 million or more, Highbridge will receive a cash payment equal to 1% of such gross sales price. This payment upon the consummation of a Fundamental Transaction may make our company less attractive to a potential acquirer or may reduce the valuation we receive in connection with a Fundamental Transaction.

Furthermore, if our market capitalization exceeds $300.0 million for a period of 21 consecutive trading days, Highbridge will receive an additional cash payment equal to $15.0 million; provided that we will have the right, in our sole discretion, to make the foregoing $15.0 million payment by the issuance of shares of our common stock. If we elect to make any payments to the entities in the form of stock, it would reduce the ownership percentage of our other stockholders.

In January 2024, the Company entered into an employment agreement with John Kim, a member of the board of directors of the Company, to become the Company’s CEO and President. Also in January 2024, the Company entered into an employment agreement with Greg Endo, the Company’s CFO and Executive Vice President. As part of the employment agreements with Mr. Kim and Mr. Endo, they are each entitled to a payment of 5% of the gross proceeds from any merger, sale or change of control transaction (as determined by the board of directors) entered by the Company for a period of up to 6 months after termination of employment; provided that they are not terminated for Cause (as defined in the employment agreement).

In March 2024, the Company entered into a consulting agreement with Christian Okonsky, a founder of the Company, chairman of the board of directors and former Chief Technology Officer. As part of the consulting agreement Mr. Okonsky is entitled to a payment of 1% of the gross proceeds from any merger, sale or change of control transaction (as determined by the board of directors) entered by the Company for a period of up to 6 months following the termination of the consulting agreement.

These change of control payments may create a conflict of interest for these directors and officers in evaluating any future change of control transactions.

If we agree to complete additional warrant inducements to the holders of warrants issued in in our August 2022 and May 2023 convertible note offerings (the “Investors”), we may reduce the exercise price of warrants held by Investors and we may issue additional warrants to the Investors to replace some or all of the warrants that were exercised.

In September and October 2023, in an effort to raise cash, we entered into warrant inducement agreements with certain investors where we reduced the exercise price of certain warrants to induce them to these exercise warrants.

To the extent we complete similar warrant inducements in the future, our stockholders may experience substantial dilution.

We do not intend to pay dividends in the foreseeable future.

We have never declared or paid any cash dividends on our capital stock. We do not expect to pay any cash dividends on our common stock in the foreseeable future. Payment of future dividends, if any, will be at the discretion of our board of directors and will depend on our financial condition, results of operations, capital requirements, restrictions contained in any financing instruments, provisions of applicable law and other factors the board deems relevant.

If securities or industry analysts do not publish research or reports about us, or if they adversely change their recommendations regarding our common stock, then our stock price and trading volume could decline.

The trading market for our common stock is influenced by the research and reports that industry or securities analysts publish about us, our industry and our market. If no analyst elects to cover us and publish research or reports about us, the market for our common stock could be severely limited and our stock price could be adversely affected. As a small-cap company, we are more likely than our larger competitors to lack coverage from securities analysts. In addition, even if we receive analyst coverage, if one or more analysts ceases coverage of us or fails to regularly publish reports on us, we could lose visibility in the financial markets, which in turn could cause our stock price or trading volume to decline. If one or more analysts who elect to cover us issue negative reports or adversely change their recommendations regarding our common stock, our stock price could decline.

If we fail to satisfy all applicable continued listing requirements of the Nasdaq Capital Market our common stock may be delisted from Nasdaq, which could have an adverse impact on the liquidity and market price of our common stock.

Our common stock is currently listed on the Nasdaq Capital Market. In order to maintain that listing, we must satisfy minimum financial and other continued listing requirements and standards, including those regarding director independence and independent committee requirements, minimum stockholders’ equity, minimum bid price, and certain corporate governance requirements. There can be no assurances that we will be able to comply with the applicable listing standards.

On July 5, 2023, we received a notice from Nasdaq that we were not in compliance with Nasdaq’s Listing Rule 5550(b)(2), which requires that we maintain a market value of listed securities (“MVLS”) of $35 million. MVLS is calculated by multiplying our shares outstanding by the closing price of our common stock. On July 6, 2023, we received a notice from Nasdaq that we were not in compliance with Nasdaq’s Listing Rule 5550(a)(2), (the “Bid Price Rule”) as the minimum bid price of our common stock had been below $1.00 per share for 30 consecutive business days. On October 30, 2023, the Company received a notice from Nasdaq that it has now regained compliance with Rule 5550(a)(2), as the minimum bid price of its common stock was above $1.00 for 10 consecutive business days.

On December 19, 2023, the Company received a notice from the Nasdaq that we were not in compliance with Nasdaq’s Listing Rule 5550(a)(2), (the “Bid Price Rule”) as the minimum bid price of our common stock had been below $1.00 per share for 30 consecutive business days.

On December 26, 2023, the Company was notified by Nasdaq that we that we were not in compliance with Nasdaq’s Listing Rule 5810(c)(3)(A)(iii) as the closing bid price of our common stock had been below $0.10 for ten consecutive trading days from December 11, 2023 through December 22, 2023 (the “Low Priced Stocks Rule”) and was subject to delisting on January 2, 2024. On January 4, 2024 we received notice from Nasdaq that we did not meet the MVLS requirement and we were subject to delisting. The Company submitted a hearing request to Nasdaq’s Hearings Department for both of these matters, which stayed the suspension of the Company’s common stock. We participated in the hearing on March 26, 2024 and we were informed that we may be provided with a decision two weeks from this date, although the timing of the decision is at the discretion of Nasdaq.

In the event that our common stock is delisted from Nasdaq and is not eligible for quotation or listing on another market or exchange, trading of our common stock could be conducted only in the over-the-counter market or on an electronic bulletin board established for unlisted securities such as the Pink Sheets or the OTC Bulletin Board. In such an event, it could become more difficult to dispose of, or obtain accurate price quotations for, our common stock, and there would likely also be a reduction in our coverage by securities analysts and the news media, which could cause the price of our common stock to decline further. Also, it may be difficult for us to raise additional capital if we are not listed on a major exchange.

In an effort to regain compliance with Nasdaq listing rules, we completed a reverse stock split on October 13, 2023 and a reverse stock split on February 5, 2024. We cannot predict whether we will need to complete an additional reverse stock split and the effect that such reverse stock split will have on the market price for shares of our common stock.

As noted in the risk factor above, we were out of compliance with the Bid Price Rule and the Low Priced Stocks Rule in December 2023. In an effort to regain compliance with these rules our board of directors authorized a reverse stock split of one for forty-five (1 for 45) on January 27, 2024 and we completed the reverse stock split on February 5, 2024. The Company’s stock price as of March 27, 2024 is below $1.00 and we may complete another reverse stock split before June 17, 2024 in order to regain compliance with the Bid Price Rule.

We cannot predict the effect that the reverse stock split will have on the market price for shares of our common stock, and the history of previous reverse stock splits has not resulted in our share price remaining above $1.00. Some investors may have a negative view of a reverse stock split. Even if the reverse stock split has a positive effect on the market price for shares of our common stock, performance of our business and financial results, general economic conditions and the market perception of our business, and other adverse factors which may not be in our control could lead to a decrease in the price of our common stock following the reverse stock split.

Furthermore, even if the reverse stock split does result in an increased market price per share of our common stock, the market price per share following the reverse stock split may not increase in proportion to the reduction of the number of shares of our common stock outstanding before the implementation of the reverse stock split. Accordingly, even with an increased market price per share, the total market capitalization of shares of our common stock after a reverse stock split could be lower than the total market capitalization before the reverse stock split. Also, even if there is an initial increase in the market price per share of our common stock after a reverse stock split, the market price may not remain at that level.

If the market price of shares of our common stock declines following the reverse stock split, the percentage decline as an absolute number and as a percentage of our overall market capitalization may be greater than would occur in the absence of the reverse stock split due to decreased liquidity in the market for our common stock. Accordingly, the total market capitalization of our common stock following the reverse stock split could be lower than the total market capitalization before the reverse stock split.

If we complete a reverse stock split, the conversion price of our Preferred Stock and some of our outstanding warrants will adjust and some of the warrants will be adjusted to increase the number of warrants outstanding which will result in additional dilution to shareholders.

As an “emerging growth company” under the Jumpstart Our Business Startups Act, or JOBS Act, we are permitted to, and intend to, rely on exemptions from certain disclosure requirements.

As an “emerging growth company” under the JOBS Act, we are permitted to, and intend to, rely on exemptions from certain disclosure requirements. We are an emerging growth company until the earliest of:

For so long as we remain an emerging growth company, we will not be required to:

Additionally, for so long as we remain an emerging growth company, we:

We intend to take advantage of all of these reduced reporting requirements and exemptions, other than the longer phase-in periods for the adoption of new or revised financial accounting standards under §107 of the JOBS Act.

Certain of these reduced reporting requirements and exemptions were already available to us due to the fact that we also qualify as a “smaller reporting company” under SEC rules. For instance, smaller reporting companies are not required to obtain an auditor attestation and report regarding management’s assessment of internal control over financial reporting; are not required to provide a compensation discussion and analysis; are not required to provide a pay-for-performance graph or CEO pay ratio disclosure; and may present only two years of audited financial statements and related MD&A disclosure.

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

ITEM 1C. CYBERSECURITY

Risk Management and Strategy

We have established policies and procedures for assessing, identifying, and managing material risk from cybersecurity threats. We monitor cybersecurity threats, including any potential unauthorized occurrence on or conducted through our information systems that we use through third party providers that may result in adverse effects on the confidentiality, integrity, or availability of our information systems or any information residing therein.

We conducted a NIST risk assessment and perform as needed updates to our risks to identify cybersecurity threats, as well as assessments in the event of a material change in our business practices that may affect information systems that are vulnerable to such cybersecurity threats. We engage a managed service provider (“MSP”) and other third parties in connection with our cybersecurity and information technology risk assessment processes and our MSP also assists us with managing and monitoring our network and local compute systems. These service providers assist us in designing and implementing our cybersecurity policies and procedures, as well as monitoring and testing our safeguards. Personnel at all levels and departments are made aware of our cybersecurity policies through communications.

As of December 31, 2023, and through the date of the filing of this report, we are not aware of any cybersecurity incidents that have materially affected or are reasonably likely to materially affect us, including our business strategy, results of operations or financial condition. For additional information regarding risks from cybersecurity threats, please refer to Item 1A, “Risk Factors,” in this Annual report on Form 10-K.

Governance

One of the key responsibilities of our board of directors is informed oversight of our risk management process, including risks from cybersecurity threats. Our board of directors is responsible for monitoring and assessing strategic risk exposure, and our executive officers are responsible for the day-to-day management of the material risks we face.

Our Executive Vice-President and Chief Financial Officer (“CFO”) is primarily responsible for assessing and managing our material risks from cybersecurity threats. In this regard, our CFO has assistance from service providers, other consultants and third parties. Our CFO has served as an executive officer for three years and prior to this was an audit and advisory partner at a public accounting firm overseeing financial statement audits of public and private companies. Audit procedures performed for his clients included evaluating internal controls and risk assessment evaluations over information technology and cybersecurity policies.

Our CFO oversees our cybersecurity policies and procedures, including those described in “Risk Management and Strategy” above. Under such policies and procedures, our CFO is responsible for reporting to our board of directors regarding any cybersecurity incident including the results of cybersecurity risk assessments.

ITEM 2. PROPERTIES

Our corporate headquarters is located in Round Rock, Texas, where we currently lease approximately 23,300 square feet of space across three facilities.

We believe that our existing space is adequate for our current operations. We believe that suitable replacement and additional space, if necessary, will be available in the future on commercially reasonable terms.

ITEM 3. LEGAL PROCEEDINGS

From time to time in the ordinary course of our business, we may be involved in legal proceedings, the outcomes of which may not be determinable. The results of litigation are inherently unpredictable. Any claims against us, whether meritorious or not, could be time consuming, result in costly litigation, require significant amounts of management time and result in diversion of significant resources. We are not able to estimate an aggregate amount or range of reasonably possible losses for those legal matters for which losses are not probable and estimable. We have insurance policies covering potential losses where such coverage is cost effective.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

Market Information

Our common stock is listed on the NASDAQ Stock Market LLC under the symbol “VLCN”.

Holders

As of March 26, 2024, we had 1,159 stockholders of record and 18,748,955 outstanding shares.

Dividends

We have never declared or paid any cash dividends on our capital stock. The payment of dividends in the future will be contingent upon our revenues and earnings, if any, capital requirements and general financial condition. We currently intend to retain earnings, if any, to finance the growth and development of our business. We do not expect to pay any cash dividends on our common stock in the foreseeable future. Payment of future dividends, if any, will be at the discretion of our board of directors and will depend on our financial condition, results of operations, capital requirements, restrictions contained in any financing instruments, provisions of applicable law and other factors the board deems relevant.

Issuer Purchases of Equity Securities

None.

Recent Sales of Unregistered Securities

All information related to equity securities sold by us during the period covered by this report that were not registered under the Securities Act have been included in our Form 10-Q filings or in a Form 8-K filing. We did not issue any equity securities during the fourth quarter of 2023 that were not registered under the Securities Act.

ITEM 6. [RESERVED]

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

You should read the following discussion and analysis of our financial condition and results of operations in conjunction with the financial statements and the related notes appearing elsewhere in this Annual Report on Form 10-K. This discussion contains forward-looking statements reflecting our current expectations that involve risks and uncertainties. Actual results and the timing of events could differ materially from those discussed in our forward-looking statements as a result of many factors, including those set forth under “Risk Factors” and elsewhere in this Annual Report on Form 10-K.

Overview

We are an all-electric, off-road powersports vehicle company developing electric two and four-wheel motorcycles and utility terrain vehicles, or UTVs, also known as side-by-sides, along with a line of upgrades and accessories. In October 2020, we began building and testing prototypes for our future offerings with two off-road motorcycles – the Grunt and the Runt. Our motorcycles feature unique frame designs protected by design patents. Additional utility and design patents have been filed for other aspects of Volcon’s vehicles.

We initially began to sell and distribute the Grunt and related accessories in the United States (‘U.S.”) on a direct-to-consumer sales platform. We terminated our Grunt direct-to-consumer sales platform in November 2021. Prior to the termination of our direct-to-consumer sales platform, U.S. consumers made deposits for 360 Grunts (net of cancellations) and five Runts, plus accessories and a delivery fee representing total deposits of $2.2 million. These orders were cancelable by the consumer until the vehicle was delivered and after a 14-day acceptance period, therefore the deposits were recorded as deferred revenue. As of June 30, 2022, we had completed shipping of all Grunts sold through our direct-to-consumer sales platform. Due to delays in developing the Runt, we refunded the deposits made for all Runts.

Beginning in November 2021, we began negotiating dealership agreements with powersports dealers to display and sell our vehicles and accessories. Customers can now, or will soon be able to, buy our vehicles and accessories directly from a local dealership. Some of these dealers will also provide warranty and repair services to customers. As of March 15, 2024, we have 103 active dealers. Dealers can order any of our available products provided they are current on their accounts receivable and are within their established credit limit. We are offering dealers payment terms 30 to 90 days to make larger purchases of our vehicles. We have entered into an accounts receivable factoring arrangement to allow the Company the ability to generate cash for working capital. We have agreements with third party financing companies to provide financing to qualified customers of each dealer. There is no recourse to the Company or the dealer if the dealer’s customer defaults on the financing agreement with the third party.

We sell our vehicles internationally through importers. Each importer buys vehicles by the container and sells vehicles and accessories to local dealers or directly to consumers. Local dealers or the importer will provide warranty and repair services for vehicles purchased in their country. In October 2023, the Company made a decision to postpone expanding our dealer network in Canada for the foreseeable future and we have terminated the employment of our Canadian regional sales managers. As of March 15, 2024, we have signed agreements with six importers in Latin America, one importer for the Caribbean Region, collectively referred to herein as the LATAM importers, one importer in New Zealand, and one importer in Australia to sell our vehicles and accessories in their assigned countries/markets. In 2024, we expect to expand our global sales of our vehicles and accessories beyond our current distributor base.

In June 2022, we signed an exclusive distribution agreement with Torrot Electric Europa S.A., referred to herein as Torrot, to distribute their electric motorcycles for youth riders in Latin America. In October 2022, we signed an expanded agreement with Torrot, which superseded the June 2022 agreement, to also be the exclusive distributor of Torrot and Volcon co-branded youth electric motorcycles in the U.S. as well as Latin America. Finally, in December 2022, we signed an expanded agreement with Torrot to be the exclusive distributor of Volcon co-branded youth electric motorcycles in Canada. In June 2023, we wrote down all remaining Torrot branded inventory in the amount of $84,000. In December 2023 we notified Torrot that we were terminating our agreements due to continued lower than expected sales at significantly discounted pricing. In 2023, we wrote down the Volcon co-branded Torrot youth motorcycles by $2,674,352 to reduce their cost to the estimated net realizable value due to lower than expected sales. We have agreed to give Torrot a total of 1,000 Volcon branded Torrot motorcycles originally purchased for $1.8 million, an upfront payment of $370,000 and an additional $1.7 million to be paid out at $100,000 over 17 months beginning in April 2024 in exchange for unfulfilled 2023 and 2024 unit purchases. As of December 31, 2023, we have Volcon Youth inventory of approximately $239,935, after reducing these to the estimated net realizable value, of Volcon branded Torrot motorcycles and accessories which we intend to liquidate and we have agreed to give Torrot sales rights in the U.S., Canada and LATAM after June 30, 2024.

In July 2022, we expanded our offerings with the introduction of the first of our Volcon UTV models, the Stag, which we initially anticipated would be available for delivery to customers in the fourth quarter of 2023, followed by additional models of the Stag expected in 2024 and 2025. Due to a delay in certain parts from third party vendors, we expect delivery to customers to begin in the first quarter of 2024. The Stag is being manufactured by a third party and incorporates electrification units, which include batteries, drive units and control modules provided by General Motors. Beginning in June 2022, we took non-binding pre-production orders which are cancelable prior to delivery. In the third quarter of 2023 we canceled all of the original pre-production orders due to the introduction of multiple models and new pricing. We began taking new pre-production orders for the newly introduced models in the third quarter of 2023. We also expect to introduce a higher performance, longer range UTV (to be named) but development of this vehicle has not yet begun and no timeline for its development and release has been determined.

In August 2022 we ceased manufacturing of the Grunt and we outsourced the manufacturing of the remaining Grunts and the 2024 Grunt EVO to the same third party manufacturer as the Stag. The 2024 Grunt EVO has replaced the Grunt and has a belt drive rather than a chain drive as well as an updated rear suspension. We began selling the Grunt EVO in the third quarter of 2023.  

We began taking pre-orders for an E-Bike, the Brat, in September 2022 and shipments to customers began in the fourth quarter of 2022. The Brat is being manufactured by a third party. In January 2023, we began selling the Brat directly to consumers through our website. Consumers who order the Brat from our website can have the Brat shipped to their specified destination.

In November 2022, we finalized an agreement with the same third party that manufactures the Stag and Grunt EVO to manufacture the Runt LT. We received prototypes of the Runt LT in the first quarter of 2023. We are evaluating the market for the Runt LT and will determine whether to proceed with production in the first half of 2024.

The estimated fulfillment of all orders we have received assumes that our third party manufacturers can successfully meet our order quantities and deadlines. If they are unable to satisfy orders on a timely basis, our customers may cancel their orders.

In September and October 2023, we reduced our headcount in several departments to reduce costs and we continue to evaluate other cost reduction opportunities.

Results of Operations

The following financial information is for the years ended December 31, 2023 and 2022.

Due to recurring losses, there is no provision for income taxes for any period presented.

Revenue

Revenue for the year ended December 31, 2023, was $3,260,988 which represents sales of Brats of $2,341,097, Grunt EVO motorcycles of $465,438, Grunt motorcycles of $129,117, Volcon Youth and Torrot motorcycles of $498,160 and accessories and parts of $261,663 offset by $436,333 for rebates and dealer discounts.

Revenue for the year ended December 31, 2022, was $4,546,686, which represents sales of Grunts of $3,576,796 and accessories and parts of $250,780. The sales of Grunts are offset by promotional rebates and discounts provided to dealers and distributors during 2022 resulting in $930,422 being recorded to reduce revenue. The rebate is provided as a year-end incentive to dealers and distributors to sell their remaining 2022 Model Year Grunt inventory. Revenue of $489,769 and $129,383 represents the sale of Brats and Torrot kids motorcycles, respectively.

Cost of goods sold

Cost of goods sold for the year ended December 31, 2023 were $11,391,040, including payroll costs of $1,200,098 and stock-based compensation of $211,981 for employees performing warehouse and logistics management and quality control testing. Product costs for Brats, Grunt EVOs, and Volcon Youth motorcycles sold during the period were $1,674,987, $711,807 and $3,236,773, respectively. We recorded a write down of $2,674,352 for Volcon Youth motorcycles to reduce their costs to the expected net realizable value. We also recorded an expense of $2,070,000 for the termination of the Torrot agreement. We recorded an expense of $450,282 related to fees paid to cancel purchase orders to reduce raw material quantities. The Company also recorded an expense of $1,401,490 to write off inventory contributed to our third party manufacturer of the Grunt EVO in return for a credit that would be provided for each unit purchased up to 900 units.

Facilities costs for the year ended December 31, 2023 were $509,360 for our warehouse facility and third party warehousing costs. Accrued warranty costs were $205,069 offset by a reversal of the accrued warranty liability in the amount of $472,978 for the Grunt where the one year warranty for defects had expired and claims were not as high as estimated.

Cost of goods sold for the year ended December 31, 2022 were $13,412,820 including labor costs of $1,740,645 for employees and contractors performing assembly, logistics, quality control testing, and service and warranty of Grunts through August 2022, when assembly of the Grunt was discontinued, and stock-based compensation of $344,374 for share-based awards for these employees. Subsequent to August 2022, labor costs of $453,471 relate to employee and contractor costs for logistics, quality control testing and service and warranty, including stock-based compensation of $234,178 for share-based awards for these employees. Total cost of materials for Grunts during the year were $5,460,943 which include parts costs for Grunts sold of $3,814,424, adjustments for excess and obsolete inventory of $460,744 and adjustments to record inventory at its net realizable value of $1,692,217. We paid $128,137 for fees owed to cancel purchase orders for Grunt parts to reduce quantities ordered to expected sales demand. Cost of goods sold for Brats and Torrot Youth motorcycles, excluding shipping, was $235,160 and $206,596, respectively, this includes a $82,627 write-down for Torrot Youth inventory to sell remaining quantities on hand in anticipation of the Volcon Youth branded motorcycles which arrived in the first quarter of 2023.

Facilities costs for the year ended December 31, 2022 were $585,114 for our manufacturing facility and inventory warehousing costs. Shipping costs and duties/tariffs for inventory purchases and shipments to customers were $2,627,658 which includes an accrual of $350,000 for costs expected to be incurred to ship our raw materials and work-in-process inventory to our third party manufacturer offset by $242,772 for shipping fees paid by customers. Accrued warranty costs were $575,608. Depreciation expense of $285,564 was recorded in the year and a loss on the write-off of property and equipment of $170,657 was recognized for the disposal of manufacturing assets due to the outsourcing of Grunt assembly.

In 2024 we expect revenue and cost of goods sold, other than inventory write downs, Torrot contract termination costs and PO cancellation costs, to increase due to the expected increase in sales of the Grunt EVO and Stag. Additional cost savings may be realized if the third party manufacturer can source or manufacture parts at a lower cost. The increase in costs for products will partially be offset by reductions in cost for salaries and benefits due to reductions in headcount completed in 2023.

Sales and marketing

Sales and marketing expenses relate to costs to increase exposure and awareness for our products and developing our network of U.S. dealers and international distributors.

Sales and marketing expenses were $7,405,705 for the year ended December 31, 2023 and were primarily related to expenses associated with promoting our products and brand of $2,889,421, employee payroll costs of $2,789,652, stock-based compensation of $693,559 for share-based awards granted to employees and consultants, and travel costs of $294,323 primarily related to costs incurred for travel to build our dealer and distributor network and to attend events to promote our products. Facilities costs were $168,000. Bad debt expense was $105,687 and professional fees in the amount of $201,125, mainly related to legal fees in the amount of $74,090 related to entering into international distribution agreements and sales consultant fees in the amount of $73,132.

For the year ended December 31, 2022 sales and marketing expenses were $5,694,556 and include $1,636,619 for promoting our products, employee payroll costs of $1,949,064, stock-based compensation of $764,517 for share-based awards granted to employees and consultants, $66,625 for professional fees, $356,958 for facilities costs primarily to operate our now closed dealership in Denver, Colorado, including costs of $148,323 for closing this store, and travel costs of $294,878 primarily related to costs incurred for travel to build our dealer network.

We also expect sales expenses to increase as we begin expanding our international distributors and selling commissions for increased sales of Grunt EVOs and the Stag offset by overall lower expenses as we seek to reduce costs.

Product Development Expense

Product development expenses relate to development of our products and process to manufacture these products.

Product development expenses were $7,868,985 for the year ended December 31, 2023 and were primarily related to expenses associated with employee payroll costs of $1,772,836, stock-based compensation of $837,271 for share-based awards granted to employees and consultants, professional fees of $298,713 for consultants assisting with product design and programming, prototype vehicles and parts costs of $3,662,908, testing costs of $240,472 to complete testing of vehicles including any required regulatory tests, $198,224 for supplies and software and facilities costs of $192,998.

For the year ended December 31, 2022, product development expenses totaled $8,456,157 and primarily related to expenses associated with employee payroll costs of $3,646,927, stock-based compensation of $704,152 for share-based awards granted to employees and consultants, $1,010,895 for consulting fees for product design, other professional fees of $133,680, primarily for employee recruiting, prototype parts and tooling costs of $2,201,706, facilities cost of $262,762 and software fees, small equipment, tools and shop supplies of $183,761.

We expect 2024 product development costs related to employee costs to remain consistent with 2023. We expect costs to decrease for design and development costs and costs related to prototype costs for the current version of the Stag since the Stag is essentially ready for production in early 2024. We expect design and development costs to increase for development of other versions of our UTV lineup being considered for future release. We expect costs for design and development costs related to the Grunt EVO to decrease since it is in production and we expect costs related to the design and development of the Runt LT to be minimal since we already have prototypes of the product.

General and Administrative Expense

General and administrative expenses relate to costs for our finance, accounting and administrative functions to support the development, manufacturing and sales of our products.

For the year ended December 31, 2023, general and administrative expenses were $6,388,007 and were primarily related to expenses associated with employee payroll costs of $1,613,575, stock-based compensation of $885,113 for share-based awards granted to employees, professional fees of $1,024,774 (including legal fees of $522,334, tax and audit fees of $326,702 and recruiting fees of $50,297), software costs were $444,318, insurance costs of $1,465,092, facilities costs of $249,074, which includes $85,756 of lease termination costs, annual and special stockholder meeting costs of $227,439 and board compensation expense of $117,000.

For the year ended December 31, 2022, general and administrative expenses were $9,046,778 and were primarily related to expenses associated with employee payroll costs of $2,497,956, stock-based compensation of $1,211,788, professional fees of $2,197,734, including legal fees of $1,714,350 and recruiting fees of $173,122, insurance costs of $1,539,798, public company costs of $416,629 excluding legal fees of $496,364 included above, and software fees of $361,014.

We expect general and administrative expenses to remain relatively consistent with the fourth quarter of 2023 over the next several quarters as we have decreased staffing in some administrative areas but expect costs such as insurance and public company reporting and compliance requirements to offset the employee cost reductions.

Interest and Other Expenses, net

Interest and other income/expenses for the year ended December 31, 2023 was $15,278,462. A loss on extinguishment of the Convertible Notes of $22,296,988 was recognized in the year ended December 31, 2023 (see Note 6 to the consolidated financial statements). Non-cash interest expense of $4,969,590 was recognized for the amortization of debt issuance costs and accretion of principal on the Convertible Notes issued in August 2022 prior to extinguishment of the Convertible Notes and for the May 2023 Notes. A gain on the change in the valuation of derivative financial liabilities and warrant liabilities of $13,473,218 was recognized in the year ended December 31, 2023 (see Note 7 to the consolidated financial statements). Offering costs related to the November 2023 public offering for the amount allocated to the issuance of Series A and Series B Warrants in the amount of $1,444,547.

Interest and other expenses, net for the year ended December 31, 2022 were $2,171,780. Non-cash interest expense of $2,231,403 was recognized for the amortization of debt issuance costs and accretion of principal on the Convertible Notes issued in August 2022.

We expect interest expense to decrease in the future due to the exchange of the May 2023 Notes for Preferred Stock.

Net Loss

Net loss for the year ended December 31, 2023 was $45,071,211, compared to $34,235,405 for the year ended December 31, 2022.

Liquidity and Capital Resources

On December 31, 2023, we had cash of $8.2 million, including $0.2 million of restricted cash and we had a negative working capital of $21.4 million. Since inception in February 2020, we have funded our operations from proceeds from debt and equity offerings.

Cash used in operating activities

Net cash used in operating activities was $29.6 million for the year ended December 31, 2023 and includes all of our operating costs except stock-based compensation of $2.6 million, write-down of inventory of $4.3 million, depreciation and amortization of $0.2 million, non-cash interest expense for the amortization of debt issuance costs and accretion of principal on Convertible Notes and May 2023 Notes of $5.0 million, gain on change in derivative financial liabilities of $13.5 million, loss on extinguishment of Convertible Notes of $22.3 million, bad debt expense of $0.1 million. Cash used in operating activities includes a decrease in accounts receivable of $0.6 million due to collections, increases in inventory of $7.6 million due to the purchase of Brats, Volcon Youth motorcycles and purchases of inventory for the Stag after considering the write down of Grunt and Volcon Youth motorcycle inventory, a decrease of $0.2 million in accounts payable, and an increase of $1.1 million in accrued liabilities due primarily to the accrual recorded for the settlement to Torrot. As of December 31, 2023, we have an increase of $0.4 million in customer deposits, primarily for orders to be fulfilled from two of our Latin American distributors for shipments of Brats and Grunt EVOs.

Net cash used in operating activities was $33.7 million for the year ended December 31, 2022 and includes all of our operating costs except non-cash expenses including stock-based compensation of $3.3 million, write-down of inventory and prepaid inventory of $1.7 million, depreciation and amortization of $0.8 million, non-cash interest expense for the amortization of debt issuance costs and accretion of principal on Convertible Notes of $2.2 million, amortization of right of use assets and lease costs of $0.4 million and losses on write-off of assets and leases of $0.6 million. Cash used in operating activities includes increases in accounts receivable of $0.8 million for sales made to dealers, an increase in inventory of $5.1 million offset by a reduction in inventory deposits of $1.6 million as we made fewer deposits based on outsourcing of the assembly of the Grunt in August 2022 as the third party manufacturer will purchase raw materials prospectively, a decrease of $2.3 million of customer deposits as we fulfilled all direct to consumer orders, a decrease of $0.4 million due to timing of payments on accounts payable, a decrease of $0.2 million in accrued liabilities and an increase in prepaid expenses and other assets of $0.8 million.

Cash used in investing activities

Net cash used in investing activities was $0.9 million for the year ended December 31, 2023, consisting of $0.9 million of purchases of equipment and tooling offset by proceeds of $0.1 million received for the sale of two vehicles.

Net cash used in investing activities was $0.8 million for the year ended December 31, 2022, primarily consisting of $0.3 million of purchases of equipment and tooling related to our Brat, Grunt, and Runt manufacturing and product development, $0.2 million for the cost of Grunts capitalized as demonstration units, and $0.2 million related to computers and equipment due to headcount growth prior to headcount reductions that occurred in the third quarter of 2022. 

Cash provided by financing activities

Cash provided by financing activities for the year ended December 31, 2023, was $27.1 million and was related primarily to proceeds from the public offerings of 32,889 shares of our common stock for net proceeds of $4.6 million, issuance of convertible notes in a private offering with a principal amount of $4.9 million and net proceeds of $3.9 million, and proceeds from the public offering of 73,913 common stock units and 878,469 pre-funded warrants units for net proceeds of $16.2 million. We also received proceeds of $1.0 million from the exercise of 9,156 warrants and reduction of the exercise price for 7,778 warrants.

Cash provided from financing activities for the year ended December 31, 2022, was $40.4 million and was related to proceeds received from both the public offering of our common stock in February 2022 where we sold 29,630 shares at $675.00 per share for net cash proceeds of $18.1 million and the issuance of senior Convertible Notes and Note Warrants in August 2022 for net cash proceeds of $22.3 million.

Our continuation as a going concern is dependent upon our ability to attain profitable operations and if necessary, obtain continued financial support from the issuance of debt or equity. As of December 31, 2023, we had incurred an accumulated deficit of $120.8 million since inception.

Management anticipates that our cash on hand as of December 31, 2023 plus the cash expected to be generated from operations will not be sufficient to fund planned operations during the near term and not beyond one year from the date of the issuance of the financial statements as of and for the year ended December 31, 2023. As such, to continue our operations in the near term we will be required to raise additional financing in the third quarter of 2024. We do not have commitments for any such financing, and there can be no assurance that such additional funding would be available to the Company on acceptable terms, or at all. If we are unable to raise additional near-term financing, we will be required to modify or curtail our operations. These factors raise substantial doubt regarding our ability to continue as a going concern.

JOBS Act Accounting Election

The recently enacted JOBS Act provides that an “emerging growth company” can take advantage of the extended transition period provided in Section 7(a)(2)(B) of the Securities Act of 1933, as amended, for complying with new or revised accounting standards. In other words, an “emerging growth company” can delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. We have irrevocably elected not to avail ourselves of this extended transition period and, as a result, we will adopt new or revised accounting standards on the relevant dates on which adoption of such standards is required for other public companies.

We have implemented all new accounting pronouncements that are in effect and may impact our financial statements and we do not believe that there are any other new accounting pronouncements that have been issued that might have a material impact on our financial position or results of operations.

Critical Accounting Policies

The preparation of financial statements and related disclosures in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, disclosure of contingent assets and liabilities at the date of the financial statements, and income and expenses during the periods reported. Actual results could materially differ from those estimates. We have identified the following critical accounting policies:

Derivative Financial Liabilities and Warrant Liabilities

We do not use derivative instruments to hedge exposures to cash flow, market, or foreign currency risks. We evaluate all of our financial instruments, including conversion features of our convertible debt and warrants issued in connection with our convertible debt, to determine if such instruments are derivatives or contain features that qualify as embedded derivatives, pursuant to ASC 480 ASC Topic 815, “Derivatives and Hedging” (“ASC 815”). The classification of derivative financial instruments, including whether such instruments should be recorded as liabilities or as equity, is reassessed at the end of each reporting period.

We accounted for the conversion features of our New Notes and Exchange Notes and related Note Warrants and Exchange Warrants issued in connection with the New Notes and Exchange Notes, all issued May 2023, as derivative financial liabilities in accordance with ASC 815. Accordingly, we recognized these derivative financial liabilities at fair value initially and adjusted them to fair value at each reporting period. These liabilities were subject to re-measurement at each balance sheet date until exercised or until the conversion feature share price and the warrant exercise price become fixed, and any change in fair value was recognized in the statement of operations. The fair value of these financial instruments were initially measured at fair value using a Monte Carlo simulation model and subsequently, the fair value was also estimated using a Monte Carlo simulation model until they were no longer deemed derivative liabilities as of August 3, 2023. In addition, we made a probability assessment as to whether our stockholders would approve the adjustment of the conversion prices and exercise prices of the derivative financial liabilities.

We account for the Series A Warrants and Series B Warrants issued in connection with the November 2023 Common Units and Prefunded Warrant Units as financial liabilities in accordance with ASC 815. Accordingly, we recognize these financial liabilities at fair value initially and adjust them to fair value at each reporting period. The liabilities are subject to re-measurement at each balance sheet date until exercised or until warrant exercise price and number of warrants become fixed, and any change in fair value is recognized in the statement of operations. The fair value of these financial instruments were initially measured at fair value using a Monte Carlo simulation model and subsequently, the fair value was also estimated using a Monte Carlo simulation model as of December 31, 2023. In addition, we made a probability assessment as to whether our stockholders would approve the adjustment of the exercise prices of the financial liabilities. The determination of the fair value of the warrant liability may be subject to change as more current information becomes available and accordingly the actual results could differ significantly. The Series A Warrants and Series B Warrants are classified as current liabilities as the timing of their exercise is at the discretion of the warrant holders and the warrants were fully vested as of the date they were issued.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are a smaller reporting company as defined by Rule 12b-2 of the Exchange Act and are not required to provide the information required under this item.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Shareholders and Board of Directors of

Volcon, Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Volcon, Inc. and its subsidiary (collectively, the “Company”) as of December 31, 2023 and 2022, and the related consolidated statements of operations, stockholders’ equity (deficit), and cash flows for the years then ended, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2023 and 2022, and the results of their operations and their cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

Going Concern Matter

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 1 to the financial statements, the Company has suffered recurring losses from operations and has a net working capital deficiency that raise substantial doubt about its ability to continue as a going concern. Management's plans in regard to these matters are also described in Note 1. The financial statements do not include any adjustments that might result from the outcome of this uncertainty.

Basis for Opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) ("PCAOB") and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provides a reasonable basis for our opinion.

/s/ MaloneBailey, LLP

www.malonebailey.com

We have served as the Company's auditor since 2021.

Houston, Texas

March 28, 2024

VOLCON, INC.

CONSOLIDATED BALANCE SHEETS

AS OF DECEMBER 31, 2023

AND 2022

The accompanying notes are an integral part of these consolidated financial statements.

VOLCON, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

FOR THE YEARS ENDED DECEMBER 31, 2023

AND 2022

The accompanying notes are an integral part of these consolidated financial statements.

VOLCON, INC.

CONSOLIDATED STATEMENT OF CHANGES IN STOCKHOLDERS’ EQUITY (DEFICIT)

FOR THE YEAR ENDED DECEMBER 31, 2023
 

The accompanying notes are an integral part of these consolidated financial statements.

VOLCON, INC.
CONSOLIDATED STATEMENT OF CHANGES IN STOCKHOLDERS’ EQUITY

FOR THE YEAR ENDED DECEMBER 31, 2022

The accompanying notes are an integral part of these consolidated financial statements.

VOLCON, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

FOR THE YEARS ENDED DECEMBER 31, 2023

AND 2022

The accompanying notes are an integral part of these consolidated financial statements.

VOLCON, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

FOR THE YEARS ENDED DECEMBER 31, 2023 AND 2022

The accompanying notes are an integral part of these consolidated financial statements.

VOLCON, INC.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS